Hi It should be something with the cnmi commad. That is the command that tells the modem to fwd incomming messages to kannel. If it is not well configured, kannel will not receive the message as it is your case..
A workarroud is to set sim-buffering=true in your config. in thie case kannel peridically check for messages in the phone. Hope helps Alvaro On 12/20/11, techbrainless <[email protected]> wrote: > > Hi All. > Any reply , plz help me !!!!!!!!!1 > > techbrainless wrote: >> >> Hi All, >> >> I am using Nokia 6680 as gsm modem to configure it with the kannel(1.4.3) >> via bluetooth , >> >> I am able to receive sms to above phone while it is connected to my >> machine but kannel can not received it (no logs indicating receiving of >> sms) >> >> by the way I am using Ubuntu 10.10. >> >> Your help would be highly appreciated >> >> >> >> #taif /var/log/syslog >> Dec 7 23:01:02 test-pc bluetoothd[1126]: Discovery session 0x206bd448 >> with :1.49 activated >> Dec 7 23:01:11 test-pc bluetoothd[1126]: Stopping discovery >> Dec 7 23:01:11 test-pc bluetoothd[1126]: Authentication requested >> Dec 7 23:01:11 test-pc bluetoothd[1126]: link_key_request >> (sba=00:15:83:15:A3:10, dba=00:16:4E:1A:D8:BA) >> Dec 7 23:01:11 test-pc bluetoothd[1126]: pin_code_request >> (sba=00:15:83:15:A3:10, dba=00:16:4E:1A:D8:BA) >> Dec 7 23:01:17 test-pc bluetoothd[1126]: link_key_notify >> (sba=00:15:83:15:A3:10, dba=00:16:4E:1A:D8:BA, type=0) >> Dec 7 23:01:17 test-pc bluetoothd[1126]: probe failed with driver >> input-headset for device /org/bluez/1076/hci0/dev_00_16_4E_1A_D8_BA >> Dec 7 23:01:27 test-pc bluetoothd[1126]: link_key_request >> (sba=00:15:83:15:A3:10, dba=00:16:4E:1A:D8:BA) >> Dec 7 23:01:27 test-pc modem-manager: (tty/rfcomm0): could not get port's >> parent device >> Dec 7 23:01:27 test-pc modem-manager: (rfcomm0) opening serial device... >> Dec 7 23:01:27 test-pc modem-manager: (rfcomm0): probe requested by >> plugin 'Generic' >> Dec 7 23:01:28 test-pc modem-manager: (rfcomm0) closing serial device... >> Dec 7 23:01:28 test-pc modem-manager: (rfcomm0) opening serial device... >> Dec 7 23:01:28 test-pc modem-manager: (Generic): GSM modem >> /sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1 claimed port rfcomm0 >> Dec 7 23:01:28 test-pc modem-manager: Added modem >> /sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1 >> Dec 7 23:01:28 test-pc modem-manager: (tty/rfcomm0): outstanding support >> task prevents export of /sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1 >> Dec 7 23:01:28 test-pc modem-manager: Exported modem >> /sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1 as >> /org/freedesktop/ModemManager/Modems/0 >> Dec 7 23:01:28 test-pc modem-manager: >> (/org/freedesktop/ModemManager/Modems/0): data port is rfcomm0 >> Dec 7 23:01:28 test-pc NetworkManager[852]: <info> ignoring modem >> 'rfcomm0' (no associated Bluetooth device) >> Dec 7 23:01:28 test-pc modem-manager: Modem >> /org/freedesktop/ModemManager/Modems/0: Equipment identifier set >> (358358001415751) >> Dec 7 23:01:28 test-pc modem-manager: (rfcomm0) closing serial device... >> >> >> testuser@test-pc:~$ sudo bearerbox -v 0 >> /home/testuser/kannel/gateway-1.4.3/debian/kannel.conf >> 2011-12-07 23:18:04 [3167] [0] INFO: Debug_lvl = 0, log_file = <none>, >> log_lvl = 0 >> 2011-12-07 23:18:04 [3167] [0] WARNING: DLR: using default 'internal' for >> storage type. >> 2011-12-07 23:18:04 [3167] [0] INFO: DLR using storage type: internal >> 2011-12-07 23:18:04 [3167] [0] DEBUG: Kannel bearerbox version `1.4.3'. >> Build `Nov 27 2011 22:10:33', compiler `4.4.5'. >> System Linux, release 2.6.35-30-generic, version #61-Ubuntu SMP Tue Oct 11 >> 15:29:15 UTC 2011, machine i686. >> Hostname test-pc, IP 192.168.1.65. >> Libxml version 2.7.7. >> Using OpenSSL 0.9.8o 01 Jun 2010. >> Using native malloc. >> >> 2011-12-07 23:18:04 [3167] [0] INFO: Added logfile >> `/home/testuser/kannel/kannel.log' with level `1'. >> 2011-12-07 23:18:04 [3167] [0] INFO: Started access logfile >> `/home/testuser/kannel/kannel.access'. >> 2011-12-07 23:18:04 [3167] [0] INFO: HTTP: Opening server at port 13000. >> 2011-12-07 23:18:04 [3167] [0] DEBUG: Started thread 1 >> (gwlib/fdset.c:poller) >> 2011-12-07 23:18:04 [3167] [0] DEBUG: Started thread 2 >> (gwlib/http.c:server_thread) >> 2011-12-07 23:18:04 [3167] [0] DEBUG: Started thread 3 >> (gw/bb_http.c:httpadmin_run) >> 2011-12-07 23:18:04 [3167] [0] DEBUG: starting smsbox connection module >> 2011-12-07 23:18:04 [3167] [0] INFO: BOXC: 'smsbox-max-pending' not set, >> using default (100). >> 2011-12-07 23:18:04 [3167] [0] DEBUG: Started thread 4 >> (gw/bb_boxc.c:sms_to_smsboxes) >> 2011-12-07 23:18:04 [3167] [0] DEBUG: Started thread 5 >> (gw/bb_boxc.c:smsboxc_run) >> 2011-12-07 23:18:04 [3167] [0] INFO: Set SMS resend frequency to 60 >> seconds. >> 2011-12-07 23:18:04 [3167] [0] INFO: SMS resend retry set to unlimited. >> 2011-12-07 23:18:04 [3167] [0] DEBUG: smsbox MO concatenated message >> handling enabled >> 2011-12-07 23:18:04 [3167] [0] INFO: DLR rerouting for smsc id <(null)> >> disabled. >> 2011-12-07 23:18:04 [3167] [0] INFO: AT2[/dev/rfcomm0]: configuration >> shows modemtype <nokiaphone> >> 2011-12-07 23:18:04 [3167] [0] DEBUG: AT2[/dev/rfcomm0]: Reading modem >> definitions from </home/testuser/kannel/gateway-1.4.3/debian/kannel.conf> >> 2011-12-07 23:18:04 [3167] [0] DEBUG: AT2[/dev/rfcomm0]: Found <1> modems >> in config >> 2011-12-07 23:18:04 [3167] [0] INFO: AT2[/dev/rfcomm0]: read modem >> definition for <Nokia 6680> >> 2011-12-07 23:18:04 [3167] [0] DEBUG: Started thread 6 >> (gw/smsc/smsc_at.c:at2_device_thread) >> 2011-12-07 23:18:04 [3167] [0] DEBUG: Started thread 7 >> (gw/bb_smscconn.c:sms_router) >> 2011-12-07 23:18:04 [3167] [0] INFO: >> ---------------------------------------- >> 2011-12-07 23:18:04 [3167] [0] INFO: Kannel bearerbox II version 1.4.3 >> starting >> 2011-12-07 23:18:04 [3167] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) maps >> to pid 3167. >> 2011-12-07 23:18:04 [3167] [2] DEBUG: Thread 2 >> (gwlib/http.c:server_thread) maps to pid 3167. >> 2011-12-07 23:18:04 [3167] [3] DEBUG: Thread 3 >> (gw/bb_http.c:httpadmin_run) maps to pid 3167. >> 2011-12-07 23:18:04 [3167] [4] DEBUG: Thread 4 >> (gw/bb_boxc.c:sms_to_smsboxes) maps to pid 3167. >> 2011-12-07 23:18:04 [3167] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) >> maps to pid 3167. >> 2011-12-07 23:18:04 [3167] [0] INFO: MAIN: Start-up done, entering >> mainloop >> 2011-12-07 23:18:04 [3167] [0] DEBUG: AT2[/dev/rfcomm0]: start called >> 2011-12-07 23:18:04 [3167] [6] DEBUG: Thread 6 >> (gw/smsc/smsc_at.c:at2_device_thread) maps to pid 3167. >> 2011-12-07 23:18:04 [3167] [6] INFO: AT2[/dev/rfcomm0]: opening device >> 2011-12-07 23:18:04 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: device opened. >> Telnet mode = 0 >> 2011-12-07 23:18:04 [3167] [7] DEBUG: Thread 7 >> (gw/bb_smscconn.c:sms_router) maps to pid 3167. >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: device opened >> 2011-12-07 23:18:05 [3167] [6] INFO: AT2[/dev/rfcomm0]: Logging in >> 2011-12-07 23:18:05 [3167] [6] INFO: AT2[/dev/rfcomm0]: init device >> 2011-12-07 23:18:05 [3167] [6] INFO: AT2[/dev/rfcomm0]: speed set to 19200 >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: --> ATZ^M >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- ATZ >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- OK >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: --> AT^M >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- AT >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- OK >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: --> AT&F^M >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- AT&F >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- OK >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: --> ATE0^M >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- ATE0 >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- OK >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: --> AT+IFC=2,2^M >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- OK >> 2011-12-07 23:18:05 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: --> AT+CPIN?^M >> 2011-12-07 23:18:06 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- +CPIN: READY >> 2011-12-07 23:18:06 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- OK >> 2011-12-07 23:18:06 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: --> AT+CMGF=0^M >> 2011-12-07 23:18:06 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- OK >> 2011-12-07 23:18:06 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: --> AT+CSMS=?^M >> 2011-12-07 23:18:06 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- +CSMS: (0) >> 2011-12-07 23:18:06 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- OK >> 2011-12-07 23:18:06 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: --> >> ATZ+CNMI=1,2,0,1,0;+CMEE=1^M >> 2011-12-07 23:18:06 [3167] [6] DEBUG: AT2[/dev/rfcomm0]: <-- OK >> 2011-12-07 23:18:06 [3167] [6] INFO: AT2[/dev/rfcomm0]: AT SMSC >> successfully opened. >> >> > > -- > View this message in context: > http://old.nabble.com/Kannel-can-not-receive-sms-tp32930547p33012291.html > Sent from the Kannel - User mailing list archive at Nabble.com. > > > -- |-----------------------------------------------------------------------------------------------------------------| Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular y Nextel en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y GPRS online Visitenos en www.perusms.NET www.smsglobal.com.mx y www.pravcom.com
