Hi, I am using Fargo Maestro 20 modem.My GSM modem is not getting detected.When i run ./bearerbox -v l smskannel.conf i get
2012-02-02 11:50:25 [2411] [6] INFO: AT2[GSM]: Closing device 2012-02-02 11:50:25 [2411] [6] DEBUG: AT2[GSM]: device opened. Telnet mode = 0 2012-02-02 11:50:26 [2411] [6] DEBUG: AT2[GSM]: device opened 2012-02-02 11:50:26 [2411] [6] INFO: AT2[GSM]: speed set to 9600 2012-02-02 11:50:26 [2411] [6] DEBUG: AT2[GSM]: --> ^M 2012-02-02 11:50:28 [2411] [6] DEBUG: AT2[GSM]: --> AT^M 2012-02-02 11:50:32 [2411] [6] DEBUG: AT2[GSM]: --> AT&F^M 2012-02-02 11:50:36 [2411] [6] ERROR: AT2[GSM]: Couldn't connect (retrying in 10 seconds). When i try wvdialconf wvtest it says, Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- ttyS0<*1>: failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- ttyS0<*1>: and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial? My smskannel.conf is, group = smsc smsc = at smsc-id = GSM modemtype = auto device = /dev/ttyS0 speed =9600 my-number = +918811909770 sms-center = +919954029008 #port = 10000 connect-allow-ip = 127.0.0.1 log-level =0 keepalive = 60 sim-buffering = true. Please help -- View this message in context: http://old.nabble.com/Fargo-Maestro-20-modem-not-getting-detected-in-Kannel-tp33248317p33248317.html Sent from the Kannel - User mailing list archive at Nabble.com.
