Destination IP Address - 150.121.118.241 aka host Port - 2901 aka port Binds - Tx/rx/txrx aka transceiver = 1 or transmitter (port = 2901 receive-port = 0) or receiver (port = 0 receive-port = 2901) No of Sessions (max) - 3 aka maximum simultaneous connections on this login, can be transceiver / receiver / transmitter Username - nkutrat -- no comments :D Password - pranci -- no comments :D
2012/7/7 Rene Kluwen <[email protected]> > Be careful posting sensitive login information on the list.**** > > The log files don’t seem to match you config file.**** > > ** ** > > ** ** > > *From:* [email protected] [mailto:[email protected]] *On > Behalf Of *alok srivastava > *Sent:* Saturday, 07 July, 2012 17:40 > *To:* [email protected] > *Subject:* not able to understand all the values of smsc operator**** > > ** ** > > dear > following information provided by my operator > > Destination IP Address - 150.121.118.241 > Port - 2901 > Binds - Tx/rx/txrx > No of Sessions (max) - 3 > Username - nkutrat > Password - pranci > Priority - P1 > DND - Inactive > Source/destination ton/npi - 1 > > i put it in smpp section...........of kannel configuration file > > group = smsc > smsc = smpp > smsc-id = xbsnl > host = 150.121.118.241 > port = 2901 > #transceiver-mode = 1 > receive-port = 0 > smsc-username = "nkutrat" > smsc-password = "pranci" > source-addr-ton = 1 > source-addr-npi = 1 > dest-addr-ton = 1 > dest-addr-npi = 1 > system-type = "smpp" > address-range = "" > > > Not able to understand how to write Priority,Binds,No of Sessions (max) > and DND etc. > when i run bearerbox by my configuration without setting above four > variables getting following error. > > 2012-07-08 02:04:13 [5665] [7] ERROR: connect to <50.28.18.241> failed > 2012-07-08 02:04:13 [5665] [7] ERROR: System error 111: Connection refused > 2012-07-08 02:04:13 [5665] [7] ERROR: error connecting to server > `50.28.18.241' at port `14090' > 2012-07-08 02:04:13 [5665] [7] ERROR: SMPP[xbsnl]: Couldn't connect to > server. > 2012-07-08 02:04:13 [5665] [7] ERROR: SMPP[xbsnl]: Couldn't connect to SMS > center (retrying in 10 seconds). > 2012-07-08 02:04:14 [5665] [6] ERROR: SMPP[xbsnl]: SMSC rejected login to > transmit, code 0x0000000d (Bind Failed). > 2012-07-08 02:04:14 [5665] [6] ERROR: SMPP[xbsnl]: Couldn't connect to SMS > center (retrying in 10 seconds). > > Please help > Regards**** >
