Thank you veru much for links and supporting.
8/3/2012 2:42 PM, Michael Bochkaryov ?????:
Just create multiple smsc groups in your kannel.conf
Possibly this articles may help you:
http://www.rattler.kiev.ua/articles/kannel-backup-connections
http://www.rattler.kiev.ua/articles/kannel-connecting-smsc-smpp
Short example (not tested):
group = core
admin-port = 13000
smsbox-port = 13001
admin-password = bar
box-deny-ip = "*.*.*.*"
box-allow-ip = "127.0.0.1"
group = smsc
smsc = fake
smsc-id = fake1
allowed-smsc-id = fake1
port = 20001
connect-allow-ip = 127.0.0.1
group = smsc
smsc = fake
smsc-id = fake2
allowed-smsc-id = fake2
port = 20002
connect-allow-ip = 127.0.0.1
group = smsbox
bearerbox-host = 127.0.0.1
sendsms-port = 13013
global-sender = 1234
group = sendsms-user
username = tester
password = foobar
8/3/2012 11:43 AM, Komil Gulboev wrote:
Hi Michael.
Thank you for detail information, I think u have great experience in
Kannel.
May u provide us some simple for multiple connection?
With best regards,
Komil
8/3/2012 12:54 PM, Michael Bochkaryov ?????:
Hi Komil,
To route messages between SMSC you can use "smsc" parameter in
sendsms HTTP interface.
Also you can use (allowed/preferred/denied)-prefix parameters for
MSISDN prefix based routing.
Group smsbox-route is for routing between multiple smsbox'es.
8/3/2012 12:00 AM, Komil Gulboev wrote:
Hi Daniel,
thank u very much for supporting, I think for separating messages
should be use routing like this:
group = smsbox-route
smsbox-id = babilone
smsc-id = babilon
or not?
8/3/2012 12:44 AM, Olutoyin Daniel ?????:
Hello Komil,
You are on the right path.
Just uncomment the second SMSC group and ensure it has all the
parameter given to you by the second network.
You can have as many smsc group in your config file as much as you
have many networks to connect to.
A good practice is to break each smsc into a seperate file and put
all the files in a folder and simply include that folder.
I hope this helps you.
Toyin Daniel
------------------------------------------------------------------------
*From:* Komil Gulboev <[email protected]>
*To:* [email protected]
*Sent:* Thursday, August 2, 2012 8:10 PM
*Subject:* Multiple SMSC integaration
Hi guys,
now I have connection via SMPP with one provider but need also
connecting with another how can I do it?
For example if receive message from one provider should be send to
subscriber with received providers settings.
Now I have this kind of settings:
group = core
#admin-port-ssl = true
admin-port = 13000
admin-password = xxx
status-password = xxx
log-file = "/var/log/kannel/kannel.log"
log-level = 0
access-log = "/var/log/kannel/access.log"
smsbox-port = 13001
#store-file = "/var/log/kannel/kannel.store"
dlr-storage = internal
sms-resend-retry = 1
#This is main settings which already working
group = smsc
smsc-id = babilon
smsc = smpp
host = xxx.xxx.xxx.xxx
port = 2775
receive-port = 2775
smsc-username = "xxx"
smsc-password = "xxxx"
source-addr-ton = 0
source-addr-npi = 0
dest-addr-ton = 1
dest-addr-npi = 1
system-type = VMA
throughput = 1000
reconnect-delay = 5
connection-timeout = 120
transceiver-mode = true
denied-smsc-id = tcell
allowed-smsc-id = babilon
preferred-smsc-id = babilon
#This section I`ll modify today but not sure for correcting and
need attention from you
#group = smsc
#smsc-id = tcell
#smsc = smpp
#host =
#port =
#receive-port =
#smsc-username = "tcell"
#smsc-password = "tcell"
#source-addr-ton = 0
#source-addr-npi = 1
#dest-addr-ton = 1
#dest-addr-npi = 1
#reconnect-delay = 5
#system-type = VMA
#throughput = 1000
#connection-timeout = 120
#transceiver-mode = true
#denied-smsc-id = babilon
#allowed-smsc-id = tcell
group = smsbox
smsbox-id=babilone
bearerbox-host = localhost
sendsms-port = 13131
global-sender = 3333
log-file = /var/log/kannel/smsbox.log
log-level = 0
access-log = /var/log/kannel/access_smsbox.log
group = sendsms-user
username = "xxxxxxx"
password = "xxxxxxx"
user-deny-ip = "*.*.*.*"
user-allow-ip = "*.*.*.*"
concatenation = true
max-messages = 20
default-smsc = babilon
group = smsbox-route
smsbox-id = babilone
smsc-id = babilon
#group = sendsms-user
#username = "tcell"
#password = "tcell"
#concatenation = true
#max-messages = 20
#default-smsc = tcell
# SMS SERVICE 'default'
group = sms-service
keyword = default
omit-empty = true
max-messages = 0
get-url =
"http://localhost/playsms/index.php?app=call&cat=gateway&plugin=kannel&access=geturl&t=%t&q=%q&a=%a&Q=%Q";
#get-url =
"http://localhost/~playsms/plugin/gateway/kannel/geturl.php?t=%t&q=%q&a=%a
<http://localhost/%7Eplaysms/plugin/gateway/kannel/geturl.php?t=%t&q=%q&a=%a>"
Please pay attention to comment line (#) this my settings true or not?
--
Regards,
Michael Bochkaryov
www.rattler.kiev.ua
--
Regards,
Michael Bochkaryov
www.rattler.kiev.ua
