Re: [opensmppbox] SMSC rejected login to transmit (bind failed)

[Christopher Burke]

Hi, The opensmppbox appears in the bearerbox as an smsbox, therefore I setup as I would an smsbox connected to a sqlbox. Configurations are below; but if this is not how it's designed possibly I done something wrong or I can expect some undesired results. The opensmppbox configuration: cb@MOBILEWORKBOX:~$ sudo cat /etc/kannel/internal/smppboxes/send_hsl/send/send.conf ############################################################ # KANNEL CONFIGURATION                                     # # Christopher Burke <christopher.bu...@simulity.com>       # ############################################################ include=/etc/kannel/internal/bearerboxes/send_hsl/send/send.conf ############################################################ # SMPPBOX Connections                                      # ############################################################ group                           = opensmppbox opensmppbox-id                  = send_hsl_smpp opensmppbox-port                = 12090 bearerbox-host                  = localhost bearerbox-port                  = 12005 log-level                       = 0 log-file                        = /var/log/kannel/send_hsl/send/log_smppbox.log our-system-id                   = send_hsl_smpp route-to-smsc                   = send_hsl smpp-logins                     = /etc/kannel/internal/smppboxes/smpplogins.txt box-dlr-storage                 = mysql ############################################################ # mysql Connections                                        # ############################################################ group                           = mysql-connection id                              = mydlr host                            = localhost username                        = root password                        = root database                        = SEND_HSL_SMPP max-connections                 = 20 ############################################################ # dlrmysql Connections                                     # ############################################################ group                           = dlr-db id                              = mydlr table                           = smppdlr field-smsc                      = smsc field-timestamp                 = ts field-destination               = destination field-source                    = source field-service                   = service field-url                       = url field-mask                      = mask field-status                    = status field-boxc-id                   = boxcid The SQLBox Configuration: cb@MOBILEWORKBOX:~$ sudo cat /etc/kannel/internal/sqlboxes/send_hsl/send/send.conf ############################################################ # KANNEL CONFIGURATION                                     # # Christopher Burke <christopher.bu...@simulity.com>       # ############################################################ ############################################################ # SQLBOX GROUP                                             # ############################################################ group                           = sqlbox id                              = send_sqlbox smsbox-id                       = send_sqlbox bearerbox-host                  = localhost bearerbox-port                  = 12001 smsbox-port                     = 12005 smsbox-port-ssl                 = false sql-log-table                   = sent_sms sql-insert-table                = send_sms log-file                        = /var/log/kannel/send_hsl/send/log_sqlbox.log log-level                       = 0 group                           = mysql-connection id                              = send_sqlbox host                            = localhost username                        = root password                        = root database                        = SEND_HSL_SQLBOX The SMPP/SMSC/Bearerbox configuration: cb@MOBILEWORKBOX:~$ sudo cat /etc/kannel/internal/bearerboxes/send_hsl/send/send.conf ############################################################ # KANNEL CONFIGURATION                                     # # Christopher Burke <christopher.bu...@simulity.com>       # ############################################################ group                           = smsbox ############################################################ # CORE GROUP                                               # ############################################################ group                           = core admin-port                      = 12000 smsbox-port                     = 12001 admin-password                  = foobarz log-file                        = /var/log/kannel/send_hsl/send/log_bearerbox.log access-log                      = /var/log/kannel/send_hsl/send/acc_bearerbox.log log-level                       = 0 box-deny-ip                     = "*.*.*.*" box-allow-ip                    = "*.*.*.*" ############################################################ # SMSC GROUP                                               # ############################################################ group                           = smsc smsc                            = smpp smsc-id                         = send_hsl host                            = a.b.c.d port                            = abcd transceiver-mode                = false smsc-username                   = "foo" smsc-password                   = "bar" system-type                     = "SMPP" address-range                   = "12345678901" source-addr-ton                 = 1 source-addr-npi                 = 1 dest-addr-ton                   = 1 dest-addr-npi                   = 1 bind-addr-ton                   = 1 bind-addr-npi                   = 1 On 07/08/12 10:27, Milan P. Stanic wrote: On Tue, 2012-08-07 at 09:57, Christopher Burke wrote: Hi Guys, Just thought I'd wrap up on this issue as it's now solved. 1. You can connect an OpenSMPPBox to a SQLBox If that is true then Rene (Kluwen) should update opensmppbox documetation with the description of SQLBox parameters and update diagram in SMPPBox.png 2. The reason I could not connect was because I had the "vma" string as lower case in the smpplogins file, but upper case in the configuration file Could you post your config section where you define 'SQLBox' parameters, please? Thanks again! Chris On 03/08/12 17:51, Milan P. Stanic wrote: On Fri, 2012-08-03 at 17:05, Christopher Burke wrote: Hi, Using the latest from SVN - perhaps I'll try to add the VMA into the smpplogins.txt and see if that works. Are you communicating directly to the bearerbox or to a sqlbox? Is it possible for opensmppbox to communicate/connect anything than bearerbox? Kind Regards and Thanks in Advance, Chris On 03/08/12 16:10, Milan P. Stanic wrote: On Fri, 2012-08-03 at 14:42, Christopher Burke wrote: Thanks for your response. My smpplogins is as follows: username internal 127.0.0.1 Which version of the opensmppbox you use? I have next line in my smpplogings.txt file: xxxx yyyy vma 127.0.0.1 where xxxx is username and yyyy is password. -rw-rw-rw- 1 root root 28 Aug 3 14:40 smpplogins.txt Does this look okay to you? Kind Regards, Christopher On 03/08/12 10:48, Artem Chekulaev wrote: Hi I had the same issue. Try to delete your smpplogins.txt (or where you store your logins) and create it again from emtpy and fill it carefully, not from example. In my case it was rights-to-read-file issue too - Kannel had no rights to any access that file 2012/8/3 Christopher Burke <christopher.bu...@simulity.com <mailto:christopher.bu...@simulity.com>> Hi, I've been attempting to connect an opensmppbox to my configuration, however I am getting the following errors: 2012-08-03 10:19:06 [10282] [6] ERROR: SMPP[recv_smpp]: SMSC rejected login to transmit, code 0x0000000d (Bind Failed). 2012-08-03 10:19:06 [10282] [6] ERROR: SMPP[recv_smpp]: Couldn't connect to SMS center (retrying in 10 seconds). What is a likely cause of this issue? I can post my configuration files and detailed logs if needed. Kind Regards and Thanks in Advance, Chris -- *Christopher Burke* Development Team Leader / Software Engineer http://simulity.com Mobile: +44 7590 571 833 Skype:krslynx NOTICE: This message contains privileged & confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message, you are hereby notified that you must not disseminate, copy or take any action in reliance on it. If you have received this message in error, please notify Simulity Labs immediately. Any views expressed in this message are those of the individual sender except where the sender specifically states them to be the view of Simulity Labs -- *Christopher Burke* Development Team Leader / Software Engineer http://simulity.com Mobile: +44 7590 571 833 Skype:krslynx NOTICE: This message contains privileged & confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message, you are hereby notified that you must not disseminate, copy or take any action in reliance on it. If you have received this message in error, please notify Simulity Labs immediately. Any views expressed in this message are those of the individual sender except where the sender specifically states them to be the view of Simulity Labs -- Christopher Burke Development Team Leader / Software Engineer http://simulity.com Mobile: +44 7590 571 833 Skype:krslynx NOTICE: This message contains privileged & confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message, you are hereby notified that you must not disseminate, copy or take any action in reliance on it. If you have received this message in error, please notify Simulity Labs immediately. Any views expressed in this message are those of the individual sender except where the sender specifically states them to be the view of Simulity Labs