Hunt, I think all are correct, bec I just replaced it with popular sim, and worked. What else you want to know ? I can paste configure here.
Chen Yee Sent by DiGi from my BlackBerry® Smartphone -----Original Message----- From: Hunt <[email protected]> Date: Thu, 29 Nov 2012 13:26:05 To: <[email protected]> Cc: [email protected]<[email protected]> Subject: Re: How to configure kannel to select a telco network for wavecom modem ? If so, can you confirm you have correct configuration SMSC, MSISDN etc. It's very hard to nail it with common generic error. On Thu, Nov 29, 2012 at 1:19 PM, <[email protected]> wrote: > ** > Hunt, > > The sim working fine. No password. I did select telco network manually in > hyperterminal and can send out sms. > > Chen Yee > Sent by DiGi from my BlackBerry® Smartphone > ------------------------------ > *From: * Hunt <[email protected]> > *Date: *Thu, 29 Nov 2012 13:11:27 +0800 > *To: *chen yee tan<[email protected]> > *Cc: *[email protected]<[email protected]> > *Subject: *Re: How to configure kannel to select a telco network for > wavecom modem ? > > It should be work similar way. Perhaps your SIM need password to use or > out of coverage? > > > On Thu, Nov 29, 2012 at 1:02 PM, chen yee tan <[email protected]> wrote: > >> I have 2 telco sim cards. One is popular telco, working just fine. I can >> use http to send sms out. One is new telco, and kannel not able to send out >> sms. To fix, I think I need to configure kannel to select telco network >> manually. How to do that ? Any advice ? Below is my log from running >> bearerbox for failure case: >> >> 2012-11-29 12:55:36 [3345] [6] INFO: AT2[/dev/ttyS0]: init device >> 2012-11-29 12:55:36 [3345] [6] INFO: AT2[/dev/ttyS0]: speed set to 9600 >> 2012-11-29 12:55:36 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> ATZ^M >> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT^M >> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- AT >> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT&F^M >> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- AT&F >> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2012-11-29 12:55:37 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> ATE0^M >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- ATE0 >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+IFC=2,2^M >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CPIN?^M >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CPIN: READY >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CMGF=0^M >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CSMS=?^M >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CSMS: (0,1) >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2012-11-29 12:55:39 [3345] [6] INFO: AT2[/dev/ttyS0]: Phase 2+ is >> supported >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CSMS=1^M >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- +CSMS: 1,1,1 >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> >> AT+CNMI=1,2,0,1,0^M >> 2012-11-29 12:55:39 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- OK >> 2012-11-29 12:55:39 [3345] [6] INFO: AT2[/dev/ttyS0]: AT SMSC >> successfully opened. >> 2012-11-29 12:55:50 [3345] [5] INFO: Client connected from <127.0.0.1> >> 2012-11-29 12:55:50 [3345] [5] DEBUG: Started thread 11 >> (gw/bb_boxc.c:function) >> 2012-11-29 12:55:50 [3345] [11] DEBUG: Thread 11 (gw/bb_boxc.c:function) >> maps to pid 3345. >> 2012-11-29 12:55:50 [3345] [11] DEBUG: Started thread 12 >> (gw/bb_boxc.c:boxc_sender) >> 2012-11-29 12:55:50 [3345] [12] DEBUG: Thread 12 >> (gw/bb_boxc.c:boxc_sender) maps to pid 3345. >> 2012-11-29 12:56:48 [3345] [11] DEBUG: boxc_receiver: sms received >> 2012-11-29 12:56:48 [3345] [11] DEBUG: send_msg: sending msg to box: >> <127.0.0.1> >> 2012-11-29 12:56:49 [3345] [6] DEBUG: AT2[/dev/ttyS0]: >> TP-Validity-Period: 24.0 hours >> 2012-11-29 12:56:49 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> AT+CMGS=23^M >> 2012-11-29 12:56:49 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- > >> 2012-11-29 12:56:49 [3345] [6] DEBUG: AT2[/dev/ttyS0]: send command >> status: 1 >> 2012-11-29 12:56:49 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> >> 0011000A8110325877350000A70BC8329BFD06DDDF723619 >> 2012-11-29 12:56:50 [3345] [6] DEBUG: AT2[/dev/ttyS0]: --> ^Z >> 2012-11-29 12:56:50 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- > >> 2012-11-29 12:56:50 [3345] [6] DEBUG: AT2[/dev/ttyS0]: <-- ERROR >> 2012-11-29 12:56:50 [3345] [6] ERROR: AT2[/dev/ttyS0]: Generic error: >> ERROR >> 2012-11-29 12:56:50 [3345] [6] DEBUG: AT2[/dev/ttyS0]: send command >> status: -1 >> >> Chen Yee >> > >
