infact i am acting as SMSC for others and i am connected to some other SMSCs (providers).
MY Client is connected with my openSMPP i am forwarding messages to Providers. when an incoming messages comes from my client it is sent to my http SMSC. here is my openSMPP conf. ################## group = opensmppbox opensmppbox-id = smppbox1 opensmppbox-port = 8999 bearerbox-host = 127.0.0.1 bearerbox-port = 13002 log-level = 0 log-file = /var/log/kannel/opensmppbox.log our-system-id = MYID *route-to-smsc = localpars* ################## now when an incomming messages is received at openSMPP, message is sent to SMSC specfied in *route-to-smsc.* * * and my SMSC localparser send-url , which send all received data to my php. and i am sure for incoming messages from openSMPP, it has nothing to do with SMS-Service. the incomming message form SMSC's, that needs a SMS-Service and get-url. ----- and the configuration is running perfectly for non multipart massages. issues comes when there is a multipart message. Thanks Ali On Wed, Dec 19, 2012 at 10:05 AM, Willy Mularto <[email protected]> wrote: > Do you mean that you have SMPP connection and forward the incoming > messages to your PHP script? If yes then your configuration is wrong. You > need SMS-Service Group, check it in the user guide. > > > > On Dec 19, 2012, at 1:54 PM, Ali Kashif wrote: > > > according to documentation max-messages applies to service and send sms > user. > > i am receiving SMPP incomming messages, which i an passing through the PHP > using send-url. > > ########################### > here is my smsc > ----- > > group = smsc smsc = http system-type = generic smsc-id = localpars > log-file = "/var/log/kannel/httpsmsc.log" port = 8998 send-url = " > http://localhost/kannel/localparser.php?date=%t&unified_sender=%Q&unified_receiver=%q&message=%a&localsmsc=%i&dlr-mask=%d&service=%n&binfo=%B&sender=%P&receiver=%p&mid=%I&dlr-url=%R&coding=%c&charset=%C&FID=%F&mclass=%m"; > connect-allow-ip = "*.*.*.*" reroute-dlr = true smsc-username = muser > smsc-password = mpass status-success-regex = "" status-permfail-regex = > "failure" status-tempfail-regex = "retry later" > > ########################### > > i am really not sure setting max-messages will help me, > > > Thanks > Ali > > > On Tue, Dec 18, 2012 at 8:33 PM, Rene Kluwen <[email protected]>wrote: > >> Try to set max-messages in your config. See the users manual.**** >> >> ** ** >> >> *From:* [email protected] [mailto:[email protected]] >> *On Behalf Of *Ali Kashif >> *Sent:* dinsdag 18 december 2012 18:14 >> *To:* [email protected] >> *Subject:* Multipart SMS and http send-url blank dlr-url**** >> >> ** ** >> >> Dear friends,**** >> >> ** ** >> >> using kannel 1.5;**** >> >> using opensmpp;**** >> >> using sqlbox;**** >> >> ** ** >> >> i have created an http smsc which is receiving messages from SMPP like ** >> ** >> >> ** ** >> >> openSMPP --> SQLBOX --> kannel httpsmsc--> sends data to my php file**** >> >> ** ** >> >> now when ever a multi part message is received, the Data received by php >> is not good.**** >> >> ** ** >> >> ##############################**** >> >> here is my http send data url**** >> >> ##############################**** >> >> >> http://localhost/kannel/localparser.php?date=%t&unified_sender=%Q&unified_receiver=%q&message=%a&localsmsc=%i&dlr-mask=%d&service=%n&binfo=%B&sender=%P&receiver=%p&mid=%I&dlr-url=%R&coding=%c&charset=%C&FID=%F&mclass=%m >> **** >> >> ** ** >> >> ** ** >> >> and here is what i am getting for a multipart message **** >> >> ##############################**** >> >> ** ** >> >> Array**** >> >> (**** >> >> [date] => 2012-12-18 16:48:18**** >> >> [unified_sender] => 9XXXXXXXXXXX**** >> >> [unified_receiver] => +9XXXXXXXXXXX**** >> >> [message] => []**** >> >> [localsmsc] => localpars**** >> >> [dlr-mask] => 0**** >> >> [service] => XXXX**** >> >> [binfo] =>**** >> >> [sender] => 9XXXXXXXXXX**** >> >> [receiver] => +9XXXXXXXXXXX**** >> >> [mid] => 56b4d632-4389-41d4-8b79-c0b7eb44d105**** >> >> [dlr-url] =>**** >> >> [coding] => 0**** >> >> [charset] => UTF-8**** >> >> [FID] => 56b4d632**** >> >> [mclass] => -1**** >> >> )**** >> >> ** ** >> >> ##############################**** >> >> just to let you know that in sqlbox sent_sms table the dlr_url field has >> data and it is like this for above SMS**** >> >> ** ** >> >> 56b4d632;56b4d632;2c2ba548;45ab6181**** >> >> ** ** >> >> ** ** >> >> ** ** >> >> ** ** >> >> ** ** >> >> if a normal message is received the data received is like this **** >> >> ** ** >> >> ##############################**** >> >> Array**** >> >> (**** >> >> [date] => 2012-12-18 16:49:25**** >> >> [unified_sender] => 9XXXXXXXXXX**** >> >> [unified_receiver] => +9XXXXXXXXXX**** >> >> [message] => []**** >> >> [localsmsc] => localpars**** >> >> [dlr-mask] => 19**** >> >> [service] => XXXX**** >> >> [binfo] =>**** >> >> [sender] => 9XXXXXXXXXXX**** >> >> [receiver] => +9XXXXXXXXXXX**** >> >> [mid] => f6585627-0cde-4f3b-84e7-9d73ca041043**** >> >> [dlr-url] => f6585627**** >> >> [coding] => 0**** >> >> [charset] => UTF-8**** >> >> [FID] => f6585627**** >> >> [mclass] => -1**** >> >> )**** >> >> ** ** >> >> ##############################**** >> >> ** ** >> >> ** ** >> >> can you please some one advise me what wrong i am doing **** >> >> ** ** >> >> Thanks **** >> >> Ali**** >> > > > Willy Mularto > F300HD+MR18DE (NLC1725) > > > > > > > > > >
