Jam, The SMSC should send messages to you using either deliver_sm or data_sm PDUs.
On 5 March 2013 09:24, Jam Hitz <[email protected]> wrote: > Hello. > > I have a very long queue of messages at the SMSC that Kannel is > picking up very, very slowly. We did a tcpdump and they concluded that > Kannel was not sending a submit_sm_resp after getting a submit_sm > causing the SMSC to re-transmit the submit_sm over and over, hence the > delay. > > Please help. My settings are as follows: > > # ======================== CORE ========================= > group = core > admin-port = 13000 > smsbox-port = 13001 > admin-password = password > log-level = 0 > store-type = file > store-location = /var/log/kannel/store_file > store-dump-freq = 1 > log-file = "/var/log/kannel/bearerbox.log" > access-log = "/var/log/kannel/bearerbox_access.log" > box-deny-ip = "*.*.*.*" > box-allow-ip = "127.0.0.1" > dlr-storage = mysql > sms-resend-retry = 50 > > # ==================== SMS DAEMON ======================== > group = smsbox > bearerbox-host = 127.0.0.1 > sendsms-port = 13013 > log-file = "/var/log/kannel/smsbox.log" > log-level = 0 > access-log = "/var/log/kannel/smsbox_access.log" > http-request-retry = 10 > #sendsms-url=/send > mo-recode=true > > #---------- MYSQL DLR -------- > group = mysql-connection > id = mysql_dlr > host = localhost > username = dlr > password = dlr > database = dlr > max-connections = 1 > > group = dlr-db > id = mysql_dlr > table = dlr > field-smsc = smsc > field-timestamp = ts > field-destination = destination > field-source = source > field-service = service > field-url = url > field-mask = mask > field-status = status > field-boxc-id = boxc > > #=============== SERVICES =============== > include = "/etc/kannel/default_service.conf" > > > #=========== SMSC CONNECTIONS =========== > > group=smsc > smsc=smpp > smsc-id=saf_receiver_b > interface-version=34 > host=192.168.9.93 > receive-port=6695 > system-type= > smsc-username=<username> > smsc-password=<password> > log-level=0 > source-addr-ton = 2 > source-addr-npi = 1 > dest-addr-ton = 2 > dest-addr-npi = 1 > msg-id-type = 0x01 > alt-charset = "ASCII" > alt-addr-charset = "GSM" > enquire-link-interval = 5 > max-pending-submits = 20 > flow-control = 0 > window = 50 > wait-ack=120 > wait-ack-expire=0x02 > -- Kind regards Jason Mule
