Hello Spameden, it is not the opensmppbox is disconnected. But the client connection to the opensmmpbox sometimes get connected. Possibly because of client connection failure or the server maintenance at client site or internet disconnection.
Saju ________________________________ From: spameden [[email protected]] Sent: Thursday, May 23, 2013 8:19 PM To: Вадим Бажов Cc: Saju John; [email protected] Subject: Re: Kannel + OpenSMPP box 2013/5/23 Вадим Бажов <[email protected]<mailto:[email protected]>> why opensmppbox is disconnected? it should be always bounded with kannel. you'll better start all the service using bearerbox masterservice. it'll run kannel+all modules mentioned in kannel.conf such as opensmppbox, sqlbox if present. It has nothing to do with opensmppbox disconnecting, you didnt understand correctly what John said. Client connected through OpenSMPPBox got disconnected, thats why MO was not correctly routed. It's clearly a bug in OpenSMPPBox and should be fixed. (i.e. store temporarily message in the kannel.store until client connects again). if your trouble is in ability to send more than one sms at the same moment, because kannel is still working for the first sent sms by that time - increase number of threads (it's 1 thread by default. i increased it up to 10 threads) 23.05.2013 15:37, Saju John пишет: Hello All, I am using the kannel + opensmppbox for sending and receiving the message. Kannel has multiple smpp connection to SMSC. The users connect to the opensmppbox and submit and receive SMSs. When a new message is received at the SMSC from the mobile , it is transferred to the kannel and the kennel transfer it to the opensmppbox. If the opensmppbox is disconnected at that point, the message is lost and “Request failed” message is sent to the mobile. Kannel Access log shows the message “Request Failed” Kannel bearerbox give the warning “WARNING: Could not route message to smsbox id <name>, smsbox is gone! Kannel smsbox give the warning “WARNING: No translation found for <message > from <NumberA> to NumberB> ERROR: request failed I am looking for a way to put the message in a queue, if the client connection to opensmppbox got terminated. When the client connect again, it should transfer the pending mesaage. Regards, Saju John DISCLAIMER: The content of this email and any attachments (“email”) is confidential, subject to copyright and may be read, copied and used only by the intended recipient. If you are not the intended recipient please notify us and erase all copies and do not disclose the email to any person. Nothing in this email shall bind Thuraya in any contract or obligation. Thuraya reserves the right to monitor all email communications through its networks. We believe, but do not warrant, that this email is virus free. DISCLAIMER: The content of this email and any attachments (“email”) is confidential, subject to copyright and may be read, copied and used only by the intended recipient. If you are not the intended recipient please notify us and erase all copies and do not disclose the email to any person. Nothing in this email shall bind Thuraya in any contract or obligation. Thuraya reserves the right to monitor all email communications through its networks. We believe, but do not warrant, that this email is virus free.
