Hi All, Any inputs for the issue I am facing.
Please point me in right direction if I am doing any mistake. Thanks, KRNRDB On Thu, Jan 23, 2014 at 10:47 PM, krnrd b <[email protected]> wrote: > I have try to rename RND-1-Rx bind to RND-1 same then dlr received showing > on kannel status page but the serious problem is the dlr's which i am > receiving, kannel sending the same dlr in submit_sm that means on Tx > connection the same delivery report submitted as submit_sm. > > But when i use TRx mode kannel performing normally also submit and > delivery repots showing on kannel status page. > > separate Tx and Rx binds use to work perfectly on kannel 1.4.3 but on > kannel 1.5.0 the same separate Tx and Rx connections not working properly > for same SMSC provider. > > My be i am missing some configuration parameters or this is the behavior > of kannel 1.5.0. > > Configuration which is working fine with kannel 1.4.3 and which not > working with kannel 1.5.0 > > # GROUP SMSC Tx > group = smsc > smsc = smpp > smsc-id = RND-1 > throughput = 1 > #transceiver-mode = yes > host = xxx.xxx.xxx.xxx > port = xxxx > system-type = "RND" > smsc-username = "xxxxx" > smsc-password = "xxxxx" > address-range = " " > reconnect-delay = 2 > alt-charset = "ASCII" > enquire-link-interval = 30 > > # Rx connection > group = smsc > smsc = smpp > smsc-id = RND-1-Rx > throughput = 1 > host = xxx.xxx.xxx.xxx > port = xxxx > system-type = "RND" > smsc-username = "xxxxx" > smsc-password = "xxxxx" > address-range = " " > reconnect-delay = 2 > enquire-link-interval = 30 > > > > > > On Thu, Jan 23, 2014 at 10:17 PM, Ciaran Scolard > <[email protected]>wrote: > >> It should happen automatically. >> >> I’m a bit new to kannel so I could be wrong but I think you just have to >> have the binds named the same. >> >> Try renaming your RND-1-Rx bind to RND-1 and see if that works. >> >> >> >> >> >> *From:* krnrd b [mailto:[email protected]] >> *Sent:* 23 January 2014 15:46 >> *To:* Ciaran Scolard >> *Cc:* users >> >> *Subject:* Re: DLR: received showing 0 in kannel status page >> >> >> >> How would I match DLR/ID ? >> >> >> >> for Kannel 1.4.3 I use same configuration incoming and outgoing shows >> properly. >> >> >> >> Thanks, >> >> KRNRDB >> >> >> >> On Thu, Jan 23, 2014 at 7:22 PM, Ciaran Scolard <[email protected]> >> wrote: >> >> Currently the Tx and Rx binds are named RND-1 and RND-1-Rx. >> >> Wouldn’t the SMPP binds have to be named the same for the DLR/ID matching >> to work? >> >> >> >> *From:* users [mailto:[email protected]] *On Behalf Of *krnrd b >> *Sent:* 23 January 2014 12:22 >> *To:* users >> *Subject:* Re: DLR: received showing 0 in kannel status page >> >> >> >> Hi all, >> >> >> >> Any one faced this issue before? >> >> >> >> Sorry just curious to know . >> >> >> >> Thanks, >> >> KRNRDB >> >> On Thursday, January 23, 2014, krnrd b <[email protected]> wrote: >> >> Hi all, >> >> >> >> I am using kannel 1.5.0 devel version. When i use Tx and Rx separated >> while connecting SMSC now problem is when submit_sm happening message >> delivered to handset and sms sent as 1 on kannel status page and showing >> properly for Tx connection but when i receiving DLR on Rx connection it's >> showing DLR: received 0 on kannel status page but dlr's coming properly on >> kannel logs. >> >> >> >> Please suggest me why dlr's showing on kannel log but not showing on >> kannel status page. >> >> >> >> Please find the attached kannel status page. >> >> >> >> Kannel bearerbox version `1.5.0'. Build `Jan 15 2014 15:56:30', >> compiler `4.1.2 20070626 (Red Hat 4.1.2-14)'. System Linux, release >> 2.6.18-53.el5, version >> >> #1 SMP Wed Oct 10 16:34:19 EDT 2007, machine x86_64. Hostname Blade1, >> IP 172.16.8.206. Libxml version 2.6.26. Using OpenSSL 0.9.8b 04 May 2006. >> Compiled >> >> with MySQL 5.1.35, using MySQL 5.1.35. Using native malloc. >> >> >> >> Status: running, uptime 0d 0h 1m 15s >> >> >> >> WDP: received 0 (0 queued), sent 0 (0 queued) >> >> >> >> SMS: received 0 (0 queued), sent 1 (0 queued), store size 0 >> >> SMS: inbound (0.00,0.00,0.00) msg/sec, outbound (0.02,0.01,0.01) >> msg/sec >> >> >> >> DLR: received 0, sent 0 >> >> DLR: inbound (0.00,0.00,0.00) msg/sec, outbound (0.00,0.00,0.00) >> msg/sec >> >> DLR: 19 queued, using mysql storage >> >> >> >> Box connections: >> >> smsbox:(none), IP 127.0.0.1 (0 queued), (on-line 0d 0h 1m 4s) >> >> >> >> SMSC connections: >> >> RND-1[RND-1] SMPP:xxx.xxx.xxx.xxx:2161/0:TestAT:SMPP_RND >> (online 72s, rcvd: sms 0 / dlr 0, sent: sms 1 / dlr 0, failed 0, queued 0 >> msgs) >> >> RND-1-Rx[RND-1-Rx] SMPP:xxx.xxx.xxx.xxx:0/2161:TestAT:SMPP_RND >> (online 73s, rcvd: sms 0 / dlr 0, sent: sms 0 / dlr 0, failed 0, queued 0 >> msgs) >> >> >> >> >> >> PDU : >> >> >> >> Tx >> >> ------------- >> >> >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: SMPP[RND-1]: throughput (0.00,1.00) >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: SMPP[RND-1]: Sending PDU: >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: SMPP PDU 0x2aaaac000a80 dump: >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: type_name: submit_sm >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: command_id: 4 = 0x00000004 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: command_status: 0 = 0x00000000 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: sequence_number: 2 = 0x00000002 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: service_type: NULL >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: source_addr_ton: 5 = 0x00000005 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: source_addr_npi: 0 = 0x00000000 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: source_addr: "xxxx" >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: dest_addr_ton: 2 = 0x00000002 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: dest_addr_npi: 1 = 0x00000001 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: destination_addr: "xxxxxxxxxxxx" >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: esm_class: 3 = 0x00000003 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: protocol_id: 0 = 0x00000000 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: priority_flag: 0 = 0x00000000 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: schedule_delivery_time: NULL >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: validity_period: NULL >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: registered_delivery: 1 = >> 0x00000001 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: replace_if_present_flag: 0 = >> 0x00000000 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: data_coding: 0 = 0x00000000 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: sm_default_msg_id: 0 = 0x00000000 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: sm_length: 16 = 0x00000010 >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: short_message: "Testing from RnD" >> >> 2014-01-23 11:12:17 [20558] [6] DEBUG: SMPP PDU dump ends. >> >> >> >> >> >> Rx >> >> -------- >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: SMPP[RND-1-Rx]: Got PDU: >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: SMPP PDU 0x1e909800 dump: >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: type_name: deliver_sm >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: command_id: 5 = 0x00000005 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: command_status: 0 = 0x00000000 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: sequence_number: 647515690 = >> 0x26984e2a >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: service_type: NULL >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: source_addr_ton: 0 = 0x00000000 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: source_addr_npi: 0 = 0x00000000 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: source_addr: "xxxx" >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: dest_addr_ton: 0 = 0x00000000 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: dest_addr_npi: 0 = 0x00000000 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: destination_addr: "xxxxxxxxxxxx" >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: esm_class: 4 = 0x00000004 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: protocol_id: 0 = 0x00000000 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: priority_flag: 0 = 0x00000000 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: schedule_delivery_time: NULL >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: validity_period: NULL >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: registered_delivery: 0 = >> 0x00000000 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: replace_if_present_flag: 0 = >> 0x00000000 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: data_coding: 0 = 0x00000000 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: sm_default_msg_id: 0 = 0x00000000 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: sm_length: 111 = 0x0000006f >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: short_message: >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: Octet string at 0x1e909a60: >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: len: 111 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: size: 112 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: immutable: 0 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: data: 69 64 3a 31 33 31 34 30 >> 31 32 33 31 31 31 32 31 id:1314012311121 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: data: 38 36 31 35 31 30 20 73 >> 75 62 3a 30 30 31 20 64 861510 sub:001 d >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: data: 6c 76 72 64 3a 30 30 31 >> 20 73 75 62 6d 69 74 20 lvrd:001 submit >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: data: 64 61 74 65 3a 31 34 30 >> 31 32 33 31 31 31 32 20 date:1401231112 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: data: 64 6f 6e 65 20 64 61 74 >> 65 3a 31 34 30 31 32 33 done date:140123 >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: data: 31 31 31 32 20 73 74 61 >> 74 3a 44 45 4c 49 56 52 1112 stat:DELIVR >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: data: 44 20 65 72 72 3a 30 30 >> 31 20 54 65 78 74 3a D err:001 Text: >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: Octet string dump ends. >> >> 2014-01-23 11:12:59 [20558] [7] DEBUG: SMPP PDU dump ends. >> >> >> >> >> >> >> >> >> >> >> >> Thanks, >> >> KRNRDB >> >> >> > >
