Hi Vinicio
I think this change is just a change of error name. You might want to check
the code or kannel changes log for the error condition that triggers those
errors. It is syntactically more correct to say that the message was
discarded after n retries than failed to send it since actually kannel
never "tried" to send the message because modem was disconnected from
network.
Therefore it shouldn't matter if the actual issue is reported as fail or
discard message; unless you do parse logs for something. If this is the
case, you can adapt your parser accordingly.
There is nothing in your config that you can do but maybe retries setup
(number and time interval).
BTW why do your modems disconnect ? If you do have a low signal you should
try to relocate them in a better place. Also some modems support external
antennas; that might enhance reception and lower its disconnections.
Regards
Alvaro
|-----------------------------------------------------------------------------------------------------------------|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
y GPRS online
Visitenos en www.perusms.com
On Tue, Aug 12, 2014 at 12:08 PM, Vinicio Cruz <[email protected]>
wrote:
> Thanks for your response Alvaro, I'll try to explain my self better.
>
>
>
> From time to time modems disconnects from network and are not able to send
> messages, in version 1.4.1 when kannel try to send an sms thru a
> disconnected modem and after the maximum retries is reached, the sms was
> marked as "FAILED SEND SMS", in latest version and same symptom the sms Is
> marked "DISCARDED SMS" in the bearerbox.access.
>
>
>
> I've read the latest manual to find some new configuration in order to
> mark the sms FAILED instead DISCARDED but no success, I'm using exactly
> the same configuration file used in 1.4.1.
>
>
>
> May be you can check my modem configuration and guide me with it if there
> is something wrong or new, I'll appreciate very much.
>
>
>
> group = core
>
> smsbox-port = 1302
>
>
>
> group = smsbox
>
> bearerbox-host = localhost
>
> bearerbox-port = 1301
>
> sendsms-port = 1303
>
> log-file = /kannel/log/smsbox.log
>
> log-level = 1
>
> access-log = /kannel/log/smsbox.access
>
>
>
> group = sms-service
>
> keyword = default
>
> text = ""
>
> get-url = "
> http://localhost:8080/sms/EntradaSMS?id=%I&hora=%t&smsc=%i&fuente=%p&destino=%P&codif=%c&texto=%b
> "
>
> omit-empty = true
>
>
>
> group = sendsms-user
>
> username = xxxx
>
> password = xxxx
>
> user-allow-ip = 192.168.1.20
>
>
>
> group = core
>
> admin-port = 1300
>
> admin-password = xxxx
>
> admin-allow-ip = 192.168.1.*
>
> smsbox-port = 1301
>
> log-file = /kannel/log/bearerbox.log
>
> log-level = 1
>
> store-file = /kannel/log/bearerbox-store.dat
>
> access-log = /kannel/log/bearerbox.access
>
> access-log-clean = yes
>
> access-log-format = "%I","%t","%l","%i","%n","%A","%p","%P","%c",%b $$##
>
> box-allow-ip = 127.0.0.1
>
> dlr-storage = internal
>
> sms-incoming-queue-limit = 0
>
> sms-resend-retry = 0
>
>
>
> group = smsbox
>
>
>
> group = modems
>
> id = multi-modem-serial
>
> sendline-sleep = 500
>
> no-pin = yes
>
> keepalive-cmd = "AT+CMGD=1,2"
>
> reset-string = AT+CFUN=1
>
> init-string = "AT+CMEE=1;+CGSMS=1"
>
> message-storage = "SM"
>
>
>
>
>
> #************************************** modems
> *******************************
>
> group = smsc
>
> smsc-id = modem-1
>
> smsc = at
>
> modemtype = multi-modem-serial
>
> device = /dev/ttyUSB0
>
> keepalive = 60
>
> max-error-count = 1
>
> log-file = /kannel/log/modem-1.log
>
> log-level = 0
>
> preferred-smsc-id = "modem-1"
>
> validityperiod = 0
>
> speed = 57600
>
> sim-buffering = true
>
>
>
> group = smsc
>
> smsc-id = modem-2
>
> smsc = at
>
> modemtype = multi-modem-serial
>
> device = /dev/ttyUSB1
>
> keepalive = 60
>
> max-error-count = 1
>
> log-file = /kannel/log/modem-2.log
>
> log-level = 0
>
> preferred-smsc-id = "modem-"
>
> validityperiod = 0
>
> speed = 57600
>
> sim-buffering = true
>
>
>
> And so on 8 modems more...
>
>
>
> *From:* Alvaro Cornejo [mailto:[email protected]]
> *Sent:* Tuesday, August 12, 2014 8:05 AM
> *To:* Vinicio Cruz
> *Cc:* users
> *Subject:* Re: Modem discard messages instead error
>
>
>
> Can you explain further your issue?
>
>
>
> The log shows error 512. You get a discard response of the message since
> it reached the maximum number of retries. Check user guide on how to
> increase the number of retries as well as its time interval.
>
>
>
> Regards
>
>
>
> Alvaro
>
>
>
> |-----------------------------------------------------------------------------------------------------------------|
> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
> celular y Nextel
> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
> y GPRS online
> Visitenos en www.perusms.com
>
>
>
> On Mon, Aug 11, 2014 at 5:31 PM, Vinicio Cruz <[email protected]>
> wrote:
>
> Hi everyone, last weekend Updated kannel from 1.4.1 to latest svn
> 'svn-r5104'. I'm facing a extrange behavior as follows, when modem is not
> connected to the network, try to send an sms and gets to the maximum
> retries, the sms gets a DISCARD status, In version 1.4.1 the sms used to
> get an ERROR status.
>
>
>
> Can anyone help me please .
>
>
>
> Vinicio Cruz
>
>
>
> Kannel bearerbox version `svn-r5104'. Build `Aug 9 2014 10:14:10',
> compiler `4.4.7 20120313 (Red Hat 4.4.7-4)'. System Linux, release
> 2.6.39-400.211.1.el6uek.i686, version #1 SMP Fri Nov 15 13:38:12 PST 2013,
> machine i686. Hostname localhost, IP 127.0.0.1. Libxml version 2.7.6. Using
> OpenSSL 1.0.1e-fips 11 Feb 2013. Using native malloc.
>
>
>
>
>
> 2014-08-11 16:06:33 [8778] [21] DEBUG: AT2[rack-4-telca]:
> TP-Validity-Period: 5 minutes
>
> 2014-08-11 16:06:33 [8778] [21] DEBUG: AT2[rack-4-telca]: --> AT+CMGS=30^M
>
> 2014-08-11 16:06:33 [8778] [21] DEBUG: AT2[rack-4-telca]: <-- >
>
> 2014-08-11 16:06:33 [8778] [21] DEBUG: AT2[rack-4-telca]: send command
> status: 1
>
> 2014-08-11 16:06:33 [8778] [21] DEBUG: AT2[rack-4-telca]: -->
> 001100088145101268000000145079BD2C0E83C66F37A8CC06C9C3E3358806
>
> 2014-08-11 16:06:33 [8778] [21] DEBUG: AT2[rack-4-telca]: --> ^Z
>
> 2014-08-11 16:06:34 [8778] [21] DEBUG: AT2[rack-4-telca]: <-- >
>
> 2014-08-11 16:06:34 [8778] [21] DEBUG: AT2[rack-4-telca]: <-- +CMS ERROR:
> 512
>
> 2014-08-11 16:06:34 [8778] [21] ERROR: AT2[rack-4-telca]: +CMS ERROR: +CMS
> ERROR: 512
>
> 2014-08-11 16:06:34 [8778] [21] ERROR: AT2[rack-4-telca]: +CMS ERROR: User
> abort or MM establishment failure (SMS) (512)
>
> 2014-08-11 16:06:34 [8778] [21] DEBUG: AT2[rack-4-telca]: send command
> status: 1
>
> 2014-08-11 16:07:22 [8778] [21] DEBUG: AT2[rack-4-telca]: --> AT+CPMS?^M
>
> 2014-08-11 16:07:22 [8778] [21] DEBUG: AT2[rack-4-telca]: <-- +CPMS:
> "SM",0,35,"SM",0,35,"SM",0,35
>
> 2014-08-11 16:07:22 [8778] [21] DEBUG: AT2[rack-4-telca]: <-- OK
>
> 2014-08-11 16:07:34 [8778] [21] DEBUG: AT2[rack-4-telca]:
> TP-Validity-Period: 5 minutes
>
> 2014-08-11 16:07:34 [8778] [21] DEBUG: AT2[rack-4-telca]: --> AT+CMGS=30^M
>
> 2014-08-11 16:07:34 [8778] [21] DEBUG: AT2[rack-4-telca]: <-- >
>
> 2014-08-11 16:07:34 [8778] [21] DEBUG: AT2[rack-4-telca]: send command
> status: 1
>
> 2014-08-11 16:07:34 [8778] [21] DEBUG: AT2[rack-4-telca]: -->
> 001100088145101268000000145079BD2C0E83C66F37A8CC06C9C3E3358806
>
> 2014-08-11 16:07:35 [8778] [21] DEBUG: AT2[rack-4-telca]: --> ^Z
>
> 2014-08-11 16:07:35 [8778] [21] DEBUG: AT2[rack-4-telca]: <-- >
>
> 2014-08-11 16:07:35 [8778] [21] DEBUG: AT2[rack-4-telca]: <-- +CMS ERROR:
> 512
>
> 2014-08-11 16:07:35 [8778] [21] ERROR: AT2[rack-4-telca]: +CMS ERROR: +CMS
> ERROR: 512
>
> 2014-08-11 16:07:35 [8778] [21] ERROR: AT2[rack-4-telca]: +CMS ERROR: User
> abort or MM establishment failure (SMS) (512)
>
> 2014-08-11 16:07:35 [8778] [21] DEBUG: AT2[rack-4-telca]: send command
> status: 1
>
> 2014-08-11 16:07:35 [8778] [21] WARNING: Maximum retries for message
> exceeded, discarding it!
>
> 2014-08-11 16:08:24 [8778] [21] DEBUG: AT2[rack-4-telca]: --> AT+CPMS?^M
>
> 2014-08-11 16:08:24 [8778] [21] DEBUG: AT2[rack-4-telca]: <-- +CPMS:
> "SM",0,35,"SM",0,35,"SM",0,35
>
> 2014-08-11 16:08:24 [8778] [21] DEBUG: AT2[rack-4-telca]: <-- OK
>
> 2014-08-11 16:08:36 [8778] [21] DEBUG: AT2[rack-4-telca]: --> AT+CMGD=1,2^M
>
>
>
> *Vinicio.*
>
>
>
>
>
