Hi, priority parameter is used to set prio for a message itself that is then just forwarded to SMSC => not your case.
what you need is preferred SMSC. Please check userguide for preferred-smsc config option. Thanks, Alex P.S. Pogaluysta pishiti tut tolko na english, ne vse ponimayut russkij :-) P.P.S. This question belongs to [email protected] <mailto:[email protected]> instead of devel. > Am 11.02.2016 um 06:34 schrieb Беляев Владимир Николаевич <[email protected]>: > > I have 2 SMSC - the main and reserve. > It is necessary to disable SMS with the main SMSC is automatically sent > through the backup SMSC. > After the restoration of connection with the main SMSC came sms return to it. > SMS sent via SMPP > > -- > С уважением, > Беляев В.Н. > > From: spameden [mailto:[email protected]] > Sent: Thursday, February 11, 2016 10:29 AM > To: Беляев Владимир Николаевич > Cc: [email protected] > Subject: Re: Not work "priority" in settings SMSC > > > > 2016-02-11 7:31 GMT+03:00 Беляев Владимир Николаевич <[email protected] > <mailto:[email protected]>>: >> While you can install one primary center and the other - a reserve that it >> went SMS only in case of unavailability of the ground? > > If I got you right you want to have multiple SMSC connections and balance > between them if ONLY one of the link goes down? > > You can do this if you assign different smsc-id for each SMSC connection and > specify smsc-id at your application level, e.g.: > for smsbox: http://.../sendsms?receiver=...&smsc_id=smscid1 > <http://.../sendsms?receiver=...&smsc_id=smscid1> > sendsms?receiver=...&smsc_id=smscid2 > > or for sqlbox: you can just set smsc-id="smscid1" upon INSERT. > > You can monitor current state of SMSC uplinks via berearebox status page. >> >> -- >> С уважением, >> Беляев В.Н. >> >> -----Original Message----- >> From: users [mailto:[email protected] >> <mailto:[email protected]>] On Behalf Of Milan P. Stanic >> Sent: Wednesday, February 10, 2016 11:05 PM >> To: [email protected] <mailto:[email protected]> >> Subject: Re: Not work "priority" in settings SMSC >> >> On Wed, 2016-02-10 at 16:31, Беляев Владимир Николаевич wrote: >> > Option does not work "priority" in settings SMSC. >> > >> > I set up the SMSC1 priority=0, SMSC2 priority=3, but SMS is >> > distributed evenly. >> > >> > Why can this be? >> >> I don't have time to look into the code but from memory I think that the >> priority parameter is for setting default message priority for particular >> SMSC and is not global parameter which set priorities between SMSCs. But, I >> could be wrong. >> >> > Kannel 1.5.0 >> > >> > Config: >> > group=smsc >> > smsc=smpp >> > >> > smsc-id=devino_mrk >> > >> > system-type= >> > >> > interface-version=34 >> > >> > enquire-link-interval=270 >> > >> > source-addr-ton=5 >> > >> > source-addr-npi=1 >> > >> > dest-addr-ton=1 >> > >> > dest-addr-npi=1 >> > >> > msg-id-type=0x00 >> > >> > log-file="/var/log/kannel/devino_mrk.log" >> > >> > log-level=0 >> > >> > priority=0 >> > >> > >> > >> > # СМС-Трафик тест >> > >> > group=smsc >> > >> > smsc=smpp >> > >> > smsc-id=smstraffic_test >> > >> > system-type=smpp >> > >> > interface-version=34 >> > >> > enquire-link-interval=270 >> > >> > source-addr-ton=1 >> > >> > source-addr-npi=1 >> > >> > dest-addr-ton=1 >> > >> > dest-addr-npi=1 >> > >> > msg-id-type=0x00 >> > >> > log-file="/var/log/kannel/smstraffic_test.log" >> > >> > log-level=0 >> > >> > priority=3 >>
