On 03/27/2015 04:25 AM, 이현수 wrote: > Thanks for your reply. > > One question, I have password for iij-mr-ms (202.214.86.252). > > If I use sg-nus-pxtr (202.51.247.10), need password for this MS server. > How can I get that password for indicating server (202.51.247.10) ?
The same password can be used for both map servers. > And I can use other pxtr and EID-prefix that already got ? You cannot use any other EID prefix. You can divide your EID prefix is smaller, more specific prefixes. You can use any PxTR from the beta network, the ones I specified were just a recommendation, since they are located in Asia, and thus don't increase your RTT to destinations as much as other PxTRs would. HTH, -Lori > > Become two question. > > > > > -----Original Message----- > From: Lori Jakab [mailto:[email protected]] > Sent: Monday, March 23, 2015 8:13 PM > To: 이현수; [email protected] > Subject: Re: [LISPmob-users] LISPmob behind NAT testing issue. > > On 03/23/2015 01:06 PM, 이현수 wrote: >> >> >> Can I know LISP Beta-network support behind NAT ? >> >> If possible how can I test with my Ubuntu xTR ? >> > There is experimental support for NAT traversal on some of map servers. > For the Asia region that you are connecting to, there is NAT traversal > support on sg-nus-pxtr (202.51.247.10). So if you want NAT traversal, you > should NOT use iij-mr-ms (202.214.86.252) as a map server, ONLY use > sg-nus-pxtr (202.51.247.10). See the example configuration file and the > LISPmob documentation on how to configure NAT traversal on the LISPmob side > (http://lispmob.org/documentation#nat-t). > > HTH, > -Lori >
