Hi Mathivanan, Another question: Can we use IfSv alone? That means, whether we can use IfSv without the whole OpenSAF started? If so, how could we do this?
Best Regards, Qiao Lei while(1){ Problem *newProblem = new Problem(); solveProblem(newProblem); cout<<"This is the life!"<<endl; } 尽力而为还不够,得竭尽全力才行。 -----邮件原件----- 发件人: Qiao, Lei (TSG-GDCC-CMEP/SH) 发送时间: 2007年12月29日 23:15 收件人: Qiao, Lei (TSG-GDCC-CMEP/SH); Mathivanan Np-G19859; users@list.opensaf.org 主题: 答复: [Users] 答复: IfSv installs virtual IP address failed:NCSCC_RC_VIP_INTERNAL_ERROR Hello, Mathivanan, Just inform you that the virtual IP works, I can ping the virtual IP now. The reason for why I could not ping the virtual IP address is that I didn't convert the virtual IP address to network byte order. Thanks again for you job and help! Best Regards, Qiao Lei while(1){ Problem *newProblem = new Problem(); solveProblem(newProblem); cout<<"This is the life!"<<endl; } 尽力而为还不够,得竭尽全力才行。 -----邮件原件----- 发件人: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 代表 Qiao, Lei (TSG-GDCC-CMEP/SH) 发送时间: 2007年12月29日 22:57 收件人: Mathivanan Np-G19859; users@list.opensaf.org 主题: [Users] 答复: IfSv installs virtual IP address failed:NCSCC_RC_VIP_INTERNAL_ERROR Hello Mathivanan, I really appreciate your help on this! It seems works! From 'ifconfig -a', we can see the vip: sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) But how can we validate this virtual IP works? I use "ping" command, but it says "Destination Host Unreachable". Besides, I must say that in the former attached code, the netmask length is invalid; I modified the code like below: int g_vip_mask = 0xffffff; ... ... ... ... int vip_mask_len; m_NCS_IPV4_MASK_LEN_P(vip_mask_len,&g_vip_mask); // the netmask is 24 bit long Best Regards, Qiao Lei while(1){ Problem *newProblem = new Problem(); solveProblem(newProblem); cout<<"This is the life!"<<endl; } 尽力而为还不够,得竭尽全力才行。 -----邮件原件----- 发件人: Mathivanan Np-G19859 [mailto:[EMAIL PROTECTED] 发送时间: 2007年12月28日 20:40 收件人: Qiao, Lei (TSG-GDCC-CMEP/SH); users@list.opensaf.org 主题: RE: [Users] IfSv installs virtual IP address failed:NCSCC_RC_VIP_INTERNAL_ERROR > Install virtual IP address failed! > > NCS_IFSV_VIP_ERRORS: 12 > NCS_IFSV_VIP_ERRORS: NCSCC_RC_VIP_INTERNAL_ERROR > > NCS_IFSV_VIP_HANDLE: vipApplName == ifsv_app_test > NCS_IFSV_VIP_HANDLE: poolHdl == 12345 > > Free virtual IP address failed! > The "Ifsv IP installer" process has to be started manually for using the VIP feature. The IFD (Interface Service Director) interacts with this IFSv IP Installer" for getting/managing information of existing physical interfaces and installing VIPs on them. By default, this driver is not started while starting opensaf, so we have to start this explicitly(after starting opensaf) like as below: cd /opt/opensaf/controller/bin/ export LD_LIBRARY_PATH=/opt/opensaf/controller/lib ./ncs_ifsv_ip_installer 2 Regards, Mathivanan. > NCS_IFSV_VIP_ERRORS: 8 > NCS_IFSV_VIP_ERRORS: NCSCC_RC_INVALID_PARAM > > > Unsubscribe handle: g_subscr_hdl == -16777214 > > Unsubscribe to interface service successfully! > > [EMAIL PROTECTED] ifsv_test]# > > > Best Regards, > > Qiao Lei > > while(1){ > Problem *newProblem = new Problem(); > solveProblem(newProblem); > cout<<"This is the life!"<<endl; > } > > 尽力而为还不够,得竭尽全力才行。 > > _______________________________________________ Users mailing list Users@list.opensaf.org http://list.opensaf.org/maillist/listinfo/users _______________________________________________ Users mailing list Users@list.opensaf.org http://list.opensaf.org/maillist/listinfo/users