Can you test-install elrepo's kernel-ml? It is currently at version 6.2.0. https://elrepo.org/linux/kernel/el9/x86_64/RPMS/
Akemi On Wed, Jan 11, 2023 at 6:28 AM Alessandro Baggi <[email protected]> wrote: > Hi, > I tried also CentOS Stream 9 and got the same problem. > > Il 09/01/23 15:59, Alessandro Baggi ha scritto: > > Hi Bobby, > > I tried also RHEL 9.1 and got the same problem. > > > > Il 06/01/23 12:49, Robert 'Bobby' Zenz ha scritto: > >> Error message is during shutdown as in the original mail: > >> > >> > md: md125 stopped > >> > >> Or close enough, I currently can't stop the system. The message is > >> spammed as fast as possible at as it seems. > >> > >> Output of the commands is as follow: > >> > >> # cat /proc/mdstat > >> Personalities : [raid1] > >> md125 : active raid1 sda3[0] sdb1[1] > >> 3756352512 blocks super 1.2 [2/2] [UU] > >> bitmap: 2/28 pages [8KB], 65536KB chunk > >> md126 : active raid1 sda5[0] sdb3[1] > >> 58592256 blocks super 1.2 [2/2] [UU] > >> bitmap: 1/1 pages [4KB], 65536KB chunk > >> md127 : active raid1 sda4[0] sdb2[1] > >> 73399296 blocks super 1.2 [2/2] [UU] > >> bitmap: 1/1 pages [4KB], 65536KB chunk > >> unused devices: <none> > >> # mdadm --detail /dev/md125 > >> /dev/md125: > >> Version : 1.2 > >> Creation Time : Sat Nov 19 14:58:50 2022 > >> Raid Level : raid1 > >> Array Size : 3756352512 (3.50 TiB 3.85 TB) > >> Used Dev Size : 3756352512 (3.50 TiB 3.85 TB) > >> Raid Devices : 2 > >> Total Devices : 2 > >> Persistence : Superblock is persistent > >> Intent Bitmap : Internal > >> Update Time : Fri Jan 6 11:21:50 2023 > >> State : clean > >> Active Devices : 2 > >> Working Devices : 2 > >> Failed Devices : 0 > >> Spare Devices : 0 > >> Consistency Policy : bitmap > >> Name : arkham:home (local to host arkham) > >> UUID : ad23388f:4e227a6c:2b3d141a:7a5f2338 > >> Events : 9621 > >> Number Major Minor RaidDevice State > >> 0 8 3 0 active sync /dev/sda3 > >> 1 8 17 1 active sync /dev/sdb1 > >> > >> As I've said, I currently can't stop the system to see if it still > >> happens. But I've seen it at least twice after the initial setup (and > >> after the RAID had finished its initial sync). > >> _______________________________________________ > >> AlmaLinux Users mailing list -- [email protected] > >> To unsubscribe send an email to [email protected] > _______________________________________________ > AlmaLinux Users mailing list -- [email protected] > To unsubscribe send an email to [email protected] >
