Hi Jonathan, Thanks for the info about x86_64v2.
Picking this up after putting it down for a bit... (I'm getting married soon! =) In my case, neither of these worked. I have tried several CPU configurations (somewhat randomly) to no avail, including: * Copy host CPU configuration did not work * Hypervisor Default * Clear CPU configuration * host-model * host-passthrough * kvm64 * qemu64 * Opteron_G1 * Westmere I also tried copying over the cpu config XML from an Alma9 instance running on a xeon server "Broadwell-IBRS" and that didn't work either. This morning I poked around various Google searches and found this page referencing the X86_64v2 requirement of RHEL 9: https://www.reddit.com/r/linux/comments/uuojiv/rhel_9support_dropped_for_intel_i5_haswell_cpu/ and searching that took me to: https://www.qemu.org/docs/master/system/i386/cpu.html which, when comparing to the list of CPU models shown in the virt-manager UI (which doesn't actually seem to exactly match the list of CPUs actually supported by the hypervisor!? Ugh!) I settled on "Nehalem" as a likely workable CPU type, which did, indeed, install and boot. (Wahoo! My QA environment can now be built!) Leaving this out there for future searches... On my system, AlmaLinux 9.3 under qemu works with the Nehalem processor in virt-manager on a 4th Gen i7 Host running AlmaLinux 9.3. On Tue, Feb 13, 2024 at 11:30 AM Jonathan Wright <[email protected]> wrote: > What CPU model are you using for the VM? AlmaLinux 9 requires x86_64v2 so > you generally need to use host passthrough and not "kvm64" which is often > the default. > > On Tue, Feb 13, 2024 at 12:34 PM Benjamin Smith <[email protected]> > wrote: > >> I'm trying to get a VM of Alma 9 running on a fully updated Alma 9 host. >> It's really simple: >> >> 1) I start virt-manager >> >> 2) Add machine, default settings, click "next... next..." >> * Local install media /home/AlmaLinux-9.3-x86_64-minimal.iso >> [X] Automatically detect from installation media/source >> * 1536 memory, 2 CPUs (default) >> * 20 GB storage (default) >> * Name: almalinux9 (default) >> >> 3) When it boots, I choose "Install AlmaLinux...." >> >> 4) Kernel panics! See attached screenshot result. >> >> What am I missing? Hopefully useful information to follow, screenshot >> attached. >> >> Host has 16 GB RAM and the following cpu. >> >> processor : 7 >> >> vendor_id : GenuineIntel >> >> cpu family : 6 >> >> model : 60 >> >> model name : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz >> >> stepping : 3 >> >> microcode : 0x28 >> >> cpu MHz : 3955.493 >> >> cache size : 8192 KB >> >> physical id : 0 >> >> siblings : 8 >> >> core id : 3 >> >> cpu cores : 4 >> >> apicid : 7 >> >> initial apicid : 7 >> >> fpu : yes >> >> fpu_exception : yes >> >> cpuid level : 13 >> >> wp : yes >> >> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov >> pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx >> pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl >> xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl >> smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe >> popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm cpuid_fault >> epb invpcid_single pti ssbd ibrs ibpb stibp fsgsbase tsc_adjust bmi1 avx2 >> smep bmi2 erms invpcid xsaveopt dtherm ida arat pln pts md_clear flush_l1d >> >> bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds >> swapgs itlb_multihit srbds mmio_unknown >> >> bogomips : 7183.66 >> >> clflush size : 64 >> >> cache_alignment : 64 >> >> address sizes : 39 bits physical, 48 bits virtual >> >> power management: >> _______________________________________________ >> AlmaLinux Users mailing list -- [email protected] >> To unsubscribe send an email to [email protected] >> > > > -- > Jonathan Wright > AlmaLinux Foundation > Mattermost: chat <https://chat.almalinux.org/almalinux/messages/@jonathan> >
