On Tue, Oct 01, 2024 at 07:47:26PM -0400, Jim Unroe via Users wrote:
> On Tue, Oct 1, 2024 at 6:39???PM Brian McCullough via Users
> <[email protected]> wrote:
> >
> 
> Because of the socket well of the radios using this style of case, it
> is common for the strain relief area of the plug to contact the side
> of the case before the plug is fully inserted into the socket. Due to
> the large variations in the cables, a few of the plugs clear the case
> just fine. Some only have a slight bit of interference such that the
> user can press hard on the plug into the socket to overcome the
> interference. Some plugs have so much interference that more extreme
> steps have to be taken to overcome the interference. Some have
> whittled away part of the plug's shell and or strain relief to
> eliminate the interference. What I have done is purchase short
> extension cables with straight plugs that eliminate the issue without
> having to perform any surgery.

Thank you, Jim.  That did the trick.  At first, I did not think that the
plug was having problems, but after unplugging and re-plugging a couple
of times, and pushing harder, it did read the existing memory and I was
able to re-program the radio.

I think that I will follow your suggestion and get a couple of patch
cables to remove the problem.



> 
> Jim KC9HI
> _______________________________________________
> Users mailing list
> [email protected]
> https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com
> To unsubscribe, send an email to [email protected]
> To report this email as off-topic, please email 
> [email protected]
> List archives: 
> https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/
_______________________________________________
Users mailing list
[email protected]
https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email 
[email protected]
List archives: 
https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/

Reply via email to