Hi -
I've used CHIRP on a Windows laptop some years back, but now I'm
starting again on a modern (Apple Silicon) mac. I'm trying to use the
same chain of USB cables (possibly a mistake):
- 409shop DB9 to Kenwood
- USB-A to DB9 (U232-P9 from Purple)
with the addition of a USB-C to USB-A adapter.
Trying to work with a Baofeg UV-82C.
As I said, probably a mistake.
The mac seemed to recognize the RS-232 device, but thinks it's a mouse
adapter. I don't see a /dev/cu* port having been created, and when I
connect the radio and power it on, it fights with the trackpad.
This is what's in the system report:
Serial Mouse Adaptor:
Product ID: 0x0231
Vendor ID: 0x0711 (Magic Control Technology Corp.)
Version: 1.03
Speed: Up to 12 Mb/s
Manufacturer: MCT Corp.
Location ID: 0x01100000 / 1
Current Available (mA): 500
Current Required (mA): 50
Extra Operating Current (mA): 0
Help? I'll fiddle with this a bit, but then I might just buy a modern
cable, if someone can recommend the right one.
Thanks.
VY 73 de chris K6DBG
_______________________________________________
Users mailing list
[email protected]
https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email
[email protected]
List archives:
https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/
