Radio: UV-999 clone (UV-17 / UV-21 family compatible) Problem: CHIRP uses a memory model based on RX frequency + offset (±) rather than separate RX and TX fields.
However, the radio’s original CPS supports true split memory channels with separate RX and TX frequencies. Issue: CHIRP can write channels that contain separate RX and TX values (as provided by the CPS or imported data) to the radio, and the radio operates correctly. But when reading the radio back into CHIRP, any memory channel that was originally programmed as a true split (separate RX and TX, not offset-based) is shown as a completely empty row in the memory table. Standard simplex channels and offset-based repeater channels are read back correctly. Only true split RX/TX channels are affected. -- Valter Host _______________________________________________ Users mailing list [email protected] https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] List archives: https://lists.chirpmyradio.com/hyperkitty/list/[email protected]/
