-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Yes they are runngin on the same machine.
Output of ip a:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
qlen 1000
link/ether a0:48:1c:b8:96:50 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.254/24 brd 192.168.1.255 scope global eno1
valid_lft forever preferred_lft forever
inet6 fe80::a248:1cff:feb8:9650/64 scope link
valid_lft forever preferred_lft forever
3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
qlen 1000
link/ether a0:48:1c:b8:96:51 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.99/24 brd 192.168.0.255 scope global eno2
valid_lft forever preferred_lft forever
inet6 fe80::a248:1cff:feb8:9651/64 scope link
valid_lft forever preferred_lft forever
Thanks and best regards,
Samuel
Am 23.11.2015 um 17:00 schrieb Martijn Brinkers:
> On 11/23/2015 04:53 PM, Samuel Greiner wrote:
>> exactly that line is written at the end of my php_hba.conf
>>
>> host all all 127.0.0.1/32
>> md5
>
> Is the Postgres database running on the same server as the
> gateway?
>
> What is the output of the following command:
>
> ip a
>
> Kind regards,
>
> Martijn Brinkers
>
>>
>> Am 23.11.2015 um 10:16 schrieb Martijn Brinkers:
>>> On 11/23/2015 10:10 AM, Samuel Greiner wrote:
>>>> Hey there,
>>>>
>>>> I installed ciphermail on CentOS following the quick install
>>>> guide step-by-step. Now when I try to access the Web GUI and
>>>> login I get the error: Back-end is not running or not yet
>>>> fully started up
>>>>
>>>> I don't really know what exactly that means and a look in the
>>>> djigzo.log is more confusing for me. I attach parts of the
>>>> djigzo.log, maybe someone has an idea of what's wrong.
>>
>>> It looks like the back-end is not allowed to access the
>>> Postgres server.
>>
>>> From the logs:
>>
>>> "org.postgresql.util.PSQLException: FATAL: kein
>>> pg_hba.conf-Eintrag fur Host 192.168.1.254, Benutzer djigzo,
>>> Datenbank djigzo, SSL aus"
>>
>>> You should check the Postgres config file pg_hba.conf to make
>>> sure that the back-end is allowed to access the Postgres
>>> server
>>
>>> On a typical setup, the config file should have a line similar
>>> to:
>>
>>> host all all 127.0.0.1/32 md5
>>
>>> Kind regards,
>>
>>> Martijn Brinkers
>>
>> _______________________________________________ Users mailing
>> list [email protected]
>> https://lists.djigzo.com/lists/listinfo/users
>>
>
- --
Tolle Zusammenstellung (überwachungs)freier Dienste:
https://prism-break.org/#de
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=J1Eu
-----END PGP SIGNATURE-----
_______________________________________________
Users mailing list
[email protected]
https://lists.djigzo.com/lists/listinfo/users
