On Sun, 18 Sep 2016 13:20:21 -0600
jd1008 <jd1...@gmail.com> wrote:


> So, the dongle is not visible to what???? It's driver?
> It's driver module is loaded. To wit:
> $ lsmod | grep rt5572sta
> rt5572sta             810817  0
> Notice the driver module has no client drivers attached to it (as 
> indicated by the trailing 0).
> PS: The driver source code does not name the driver module as
> rt3072.ko , So, it is not clear to me if it actually built a driver
> for that chipset.

The kernel sources, in
 says this:

config RT2800USB
        tristate "Ralink rt27xx/rt28xx/rt30xx (USB) support"
        depends on USB
        select RT2800_LIB
        select RT2X00_LIB_USB
        select RT2X00_LIB_FIRMWARE
        select RT2X00_LIB_CRYPTO
        select CRC_CCITT
          This adds support for rt27xx/rt28xx/rt30xx wireless chipset
family. Supported chips: RT2770, RT2870 & RT3070, RT3071 & RT3072

          When compiled as a module, this driver will be called

So, it sounds like your compile didn't actually compile the correct
driver, since yours is called rt5572sta.  Not sure why, but that would
explain why it didn't help with recognizing the RT3072 device.

I'm also not sure if the stock Fedora kernel turns on this module.  You
could check /boot/config-[your kernel version] to see if 
config RT2800USB is selected as a module or to be built in.
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org

Reply via email to