On Sun, 2019-11-17 at 09:55 +0100, Tom H wrote: > On Sat, Nov 16, 2019 at 7:50 PM Patrick O'Callaghan > <pocallag...@gmail.com> wrote: > > This is quite embarrassing, but I'm banging my head against a wall > > and hoping other eyes will spot some obvious mistake. > > > > I have an F31 guest (fedora30) running in QEMU/KVM on an F31 host > > (Bree). I want to mount a host directory via NFS in the guest. I > > set this up a long time ago and it has worked through several > > Fedora releases without issue, but in a fit of spring cleaning I > > did a fresh install of F31 rather than my usual update, so of > > course now it doesn't work. Clearly I did something right back in > > the day and have now forgotten what it was. > > > > The guest can ping the host and ping the wider Internet, so basic > > connectivity works (this is via a NAT-style connection). The host > > can ssh into the guest. > > > > Firewall setup on the host: > > [poc@Bree ~]$ firewall-cmd --list-all > > home (active) > > target: default > > icmp-block-inversion: no > > interfaces: enp3s0 > > sources: > > services: dhcp dhcpv6-client dns libvirt mdns mountd nfs nfs3 plex > > rpc-bind rsyncd samba samba-client ssh > > ports: > > protocols: > > masquerade: no > > forward-ports: > > source-ports: > > icmp-blocks: > > rich rules: > > > > And on the guest: > > [poc@fedora30 ~]$ sudo firewall-cmd --list-all > > home (active) > > target: default > > icmp-block-inversion: no > > interfaces: enp1s0 > > sources: > > services: dhcpv6-client mdns samba-client ssh > > ports: > > protocols: > > masquerade: no > > forward-ports: > > source-ports: > > icmp-blocks: > > rich rules: > > > > Guest ip: > > [poc@fedora30 ~]$ ip addr > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN > > group default qlen 1000 > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > inet 127.0.0.1/8 scope host lo > > valid_lft forever preferred_lft forever > > inet6 ::1/128 scope host > > valid_lft forever preferred_lft forever > > 2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel > > state UP group default qlen 1000 > > link/ether 52:54:00:ca:07:30 brd ff:ff:ff:ff:ff:ff > > inet 192.168.122.156/24 brd 192.168.122.255 scope global dynamic > > noprefixroute enp1s0 > > valid_lft 2893sec preferred_lft 2893sec > > inet6 fe80::2e77:5bc1:d19a:6045/64 scope link noprefixroute > > valid_lft forever preferred_lft forever > > > > and routing: > > [poc@fedora30 ~]$ ip route > > default via 192.168.122.1 dev enp1s0 proto dhcp metric 100 > > 192.168.122.0/24 dev enp1s0 proto kernel scope link src 192.168.122.156 > > metric 100 > > > > [poc@Bree ~]$ ping fedora30 > > PING fedora30 (192.168.122.156) 56(84) bytes of data. > > 64 bytes from fedora30 (192.168.122.156): icmp_seq=1 ttl=64 time=20.1 ms > > ... > > > > Exports on the host: > > [poc@Bree ~]$ sudo exportfs > > /home/Media 192.168.0.0/16 > > /home/poc/Shared > > vm-* > > /home/poc/Shared > > fedora* > > > > But from the guest: > > [poc@fedora30 ~]$ showmount -e bree > > clnt_create: RPC: Unable to receive > > > > What am I missing? > > Does "showmount ..." list anything on "bree" itself? > > What's the output of "cat /proc/fs/nfsd/versions" and "ss -ntul | grep > -E "111|2049|20048" | column -t" (on "bree")? > > "showmount ..." won't work if the first doesn't have "+3" or if the > second doesn't have rpcbind, nfsd, and mountd lines. > > FTR. for firewalld: > "mountd" opens 20048, tcp & udp > "nfs" opens 2049, tcp > "nfs3" opens 2049, tcp & udp > "rpc-bind" opens 111, tcp & udp
Thanks. I solved it by adding the services to the libvirt zone as Ed recommended. poc _______________________________________________ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
