Greetings again,
I am continuing on my UAS work with one step wanting to simulate a set
of flights with the MAVlink data sent to my esp32 RemoteID modules for
transmission.
I have a couple esp32 set up, but how to get the data into them using
Fedora and not Windows and not even Ubuntu. After a lot of digging, it
seems that with the ArduPilot SoftwareInTheLoop (SITL) I should be able
to do this.
I wsa told to try:
1. https://ardupilot.org/dev/docs/sitl-simulator-software-in-the-loop.html
<https://ardupilot.org/dev/docs/sitl-simulator-software-in-the-loop.html>
2. https://ardupilot.org/dev/docs/copter-sitl-mavproxy-tutorial.html
<https://ardupilot.org/dev/docs/copter-sitl-mavproxy-tutorial.html>
3.
https://ardupilot.org/dev/docs/setting-up-sitl-on-linux.html#setting-up-sitl-on-linux
<https://ardupilot.org/dev/docs/setting-up-sitl-on-linux.html#setting-up-sitl-on-linux>
and it is #3 where converting Ubuntu instructions to Fedora that I am
stuck. I can work with GIT, that part is easy. But when I get past
that, I stall.
Can anyone take a look at this and advise?
Of course another option is running MONO and then just MissionPlanner,
but lots of warnings that that crashes.
thanks
--
_______________________________________________
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Do not reply to spam, report it:
https://pagure.io/fedora-infrastructure/new_issue
