Hi Johannes, gibt es das Interface auch, wenn du "ip addr" ausführst?
Wenn ich ein Interface von Brücke auf nicht-Brücke umschalte, dann gibt es manche Interfaces nicht mehr. Viele Grüße, Nicco On 03/20/2018 09:34 AM, Johannes Rohr wrote: > > > Hallo, Gemeinde, > > > Auf einer СPE 210 mit Hedy see ich im Sekundentakt die Logmeldung: > > Adding interface wlan0-adhoc-2 > bind: Address not available > > Mir ist nur klar, dass wlan0-adhoc-2 das Mesh-Netzwerk ist > > Dazu steht in /etc/config/network: > > config interface ‘wireless0’ > option netmask ‘255.255.0.0’ > option proto ‘static’ > option ipaddr ‘10.22.16.5’ > > config rule ‘olsr_tunnel_wireless0_ipv4’ > option lookup ‘olsr-tunnel’ > option priority ‘19999’ > option in ‘wireless0’ > > config rule ‘olsr_default_wireless0_ipv4’ > option lookup ‘olsr-default’ > option priority ‘20000’ > option in ‘wireless0’ > > config rule ‘olsr_default_unreachable_wireless0_ipv4’ > option action ‘unreachable’ > option priority ‘20001’ > option in ‘wireless0’ > > und in /etc/config/wireless > > config wifi-iface > option ifname ‘wlan0-adhoc-2’ > option network ‘wireless0’ > option device ‘radio0’ > option mode ‘adhoc’ > option ssid ‘Mesh23’ > option bssid ‘02:ca:ff:ee:ba:be’ > option encryption ‘none’ > > Hat jemand einen Tipp was da los sein kann? > > > > _______________________________________________ > Users mailing list > [email protected] > https://lists.freifunk-potsdam.de/cgi-bin/mailman/listinfo/users
_______________________________________________ Users mailing list [email protected] https://lists.freifunk-potsdam.de/cgi-bin/mailman/listinfo/users
