Thanks Dan,
It is working now.
The problem actually had to do with the configuration on the CPE and my
confusion about where find the configuration files.
I am actually running customized CarrierWRT firmware (on top of OpenWRT)
and I had been attempting to configure the Inform URL using the file
/usr/share/easycwmp/defaults. It turns out that my inform configuration
was actually in the file /etc/config/easycwmp and that it was already
configured correctly, except that it specified https instead of http and
had the wrong port number. Changing those did the trick.
Rob
------------------------------------------------
On 2/13/2015 3:12 PM, Dan Morphis wrote:
Robert,
You need to open port 7547 for the cwmp module.
On the CPE, you set the management server URL to http://your_ip:7547/
and enable the client.
After you apply the settings, the CPE should initiate a connection to
the ACS. If that doesn't happen, check the logs on the CPE.
-dan
On Fri, Feb 13, 2015 at 10:55 AM, [email protected]
<[email protected]
<mailto:[email protected]>> wrote:
I am having trouble getting started with GenieACS and getting any
routers or access points to show up in the device list.
I have GenieACS installed on an AWS instance and can access the
gui at MyGenieAcsUrl:3000 and I have several routers and access
points running OpenWRT. Any help about what to do next to get
them to inform to the acs would be appreciated.
One detail that I couldn't find a clear answer to on the Wiki that
might be related to my problem, is what ports to open in the AWS
security group.
Rob
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.genieacs.com/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
