OK, will do. Thanks, Jim
On 14/02/2015 5:15 PM, Dan Morphis wrote:
Change the log level to debug on the 505 and then check the log.
If that doesn't yield anything useful, then fire up tcpdump, tell it to output
in pcap format and look at the capture in wireshark. If you have a unix
workstation you can use wireshark on the workstation, ssh and tcpdump/tshark to
see the packets in real time. I have the full command line at my office, but
won't be in until Tuesday.
-dan
On Feb 14, 2015, at 12:56 PM, Jim Maclean <[email protected]> wrote:
Dan, the firmware is a special 'approved by Bell Canada' version. I'm using a
very basic setup with the three modems; PPPoE, 0/35 on public internet. I
verified that all three modem have same CWMP setup - CWMP enabled and
myserverURL:7547. I checked that ports 7547 and 7567 are open. What puzzles
me is why the TP-Link modem worked (in bridge mode) essentially right out of
the box and the 505s (in router mode) don't.
Jim
On 14/02/2015 3:59 PM, Dan Morphis wrote:
What firmware do you have on the 505's? 2.4.0.5 is the latest iirc. How many
interfaces do you have on the 505? Which interface do you have the management
server bound to?
In my setup, we have a 0/35 and 0/36 pvc setup. The 35 is the public internet,
and the 36 is doing IPoE and vlan'd to our ACS. I have the management server
bound to the interface (atm1.1). Works really well and it allows us to control
the cpe if it's in bridged mode.
-dan
On Feb 14, 2015, at 11:22 AM, Jim Maclean <[email protected]> wrote:
Hi there, I have a test setup consisting of two Smartrg 505n modems, one local and
one remote. Plus a remote TPLink 8816 modem. I can't get either of the Smartrg
modems to connect with GenieACS via the wan interfaces. The local unit will
connect via the LAN interface. The 8816 connected first time and has been stable
since so I know the URL & server is functioning correctly. The Smartrg modem
log shows the follow message:
tr69c:750.371:Connected:1258:ACS Connect Status = 2 Connection to host GenieACS
URL:7547 failed 146 (Connection refused)²^B
Has anybody encountered this issue and if so, did you find a solution?
Also, is there GenieACS log (I couldn't find one) that might provide more
detail on why the connection was refused?
Regards
--
Jim Maclean | COMSULT
Unit-1 3096 Danforth Ave. Suite 137 | Toronto, ON M1L 1B1
Cell: (416) 830-3997 | [email protected] | www.comsultserv.ca
This message is intended for the addressees only and may contain
confidential or privileged information. No rights to privilege have been
waived. Any copying, retransmittal, taking of action in reliance on, or
other use of the information in this communication by persons other than the
addressees is prohibited. If you have received this message in error, please
reply to the sender by e-mail and delete or destroy all copies of this
message.
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
--
Jim Maclean | COMSULT
Unit-1 3096 Danforth Ave. Suite 137 | Toronto, ON M1L 1B1
Cell: (416) 830-3997 | [email protected] | www.comsultserv.ca
This message is intended for the addressees only and may contain
confidential or privileged information. No rights to privilege have been
waived. Any copying, retransmittal, taking of action in reliance on, or
other use of the information in this communication by persons other than the
addressees is prohibited. If you have received this message in error, please
reply to the sender by e-mail and delete or destroy all copies of this
message.
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
--
Jim Maclean | COMSULT
Unit-1 3096 Danforth Ave. Suite 137 | Toronto, ON M1L 1B1
Cell: (416) 830-3997 | [email protected] | www.comsultserv.ca
This message is intended for the addressees only and may contain
confidential or privileged information. No rights to privilege have been
waived. Any copying, retransmittal, taking of action in reliance on, or
other use of the information in this communication by persons other than the
addressees is prohibited. If you have received this message in error, please
reply to the sender by e-mail and delete or destroy all copies of this
message.
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
