Thank you a lot, Dan. Your help is very important for me.
I tried to access to the logs of my Tenda W300D and i found I must
solder to the PCB and do some other tricks to pick up some info. I
sniffed with traffic captured in my ACS and sent the logs to Tenda
Technicians. I will answer you if I know something new about the logs.
That approach you told me is really good. We have a Web-based app in
Shiny (A module of the R programming language to construct Web Apps)
that creates automatically configuration files, store them on a web (or
tftp depending on the router type) server, and when the router connects,
automatically picks it up from that server via DHCP66. I would like to
still use this app to make the configuration files and send them (or
simply commiting changes of objects and creating tags and so on). I've
seen a good API written by Zaid that I will use.
I have been with troubles trying to change, for example, the WiFi SSID.
Here I explain the steps I've done:
1) Create a tag named "W300D" in the "Devices" section for the online router
2) Create a preset: Name: "Config", Weight: 20, Precondition: Tag =
W300D, Configurations: Set
"InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.SSID" to "Something"
I discovered minutes ago that it works. But in the Task queue appears:
setParameterValues 2015-07-03T10:51:23.072Z 2 Invalid arguments
Retry <http://10.254.254.96:3000/faults/559665e7f4b91bfa0410d4df/retry>
Destroy <http://10.254.254.96:3000/faults/559665e7f4b91bfa0410d4df>
Only to inform you. Doesn't know if this is bad.
Thank you a lot.
- Sergio Fernández
El 02/07/15 a las 15:55, Dan Morphis escribió:
A better way of handling this might be to use presets and tags. When a cpe comes online, I set tags like
"Routed", "WanPort", "Bridged". Then I have a "Base Config" preset at weight 20
which sets things common to all cpe modes. Next is where the tag specific preset run (Routed, WanPort, Bridged) which
adds any objects necessary (wanpppconnection, wanipconnection, wlanconfiguration, etc). Then at the final level I have
a preset per device which contains the customers wifi configuration.
Configuring the PPPoE is done by our custom subscriber management software
(Dashboard) and it gets notified to do so via an event went from genie to our
software. When Dashboard gets a bootstrap event, it weights until everything is
configured on the cpe, and then changes the PPPoE password to a random 12
characters and then does a set parameters to summary,pppoe[Username|Password]
with the appropriate values. If you go this route, you will need to use my fork
https://github.com/akcoder/genieacs
The reason for the final step is genie doesn't (yet) support aliases in
presets. That's on my list of things to fix and submit a patch for.
-dan
On Jul 2, 2015, at 2:26 AM, Sergio Fernández
<[email protected]> wrote:
Thank you, Cas de Reuver
Is there any possibilty in the future to implement this option? I was using
GenieACS in order to, whenever they factory reset (accidentaly or by a client),
the router would autoconfigure to its old state. I am doing this as one part of
a Final Project at University. (The other part was DHCP66 autoconfiguration and
it's already done) I would highly appreciate any help to finish this project
with TR069, yet it's difficult.
Maybe I could help with the developer in order to autoconfigure automatically
my routers Tenda W300D, or I will have to select another TR069 solution,
because I need to finish my Final Project before August...
Thank you all.
- Sergio Fernández
El 02/07/15 a las 12:02, Cas de Reuver escribió:
Hi Sergio,
Configuration files aren't supported yet. Only Firmware files are being pushed
now.
https://github.com/zaidka/genieacs/blob/7882f7d9aa10ecf61205ddd2c656370b54167c6b/lib/cwmp.coffee#L502
- Cas de Reuver
On Donderdag 2 Juli 2015 11.56 CEST, Sergio
Fernández<[email protected]> wrote:
Another log:
Started POST "/devices/c83a35-96318REF-c83a355bc050" for 10.254.254.28 at
2015-07-02 11:55:19 +0200
Processing by DevicesController#update as HTML
Parameters: {"authenticity_token"=>"RNuhzabLuxZAmw//vD6hNm7phMk0ghNZ6X0vwTocKyk=",
"commit"=>"[{\"name\":\"download\",\"file\":\"5594fa5ada3ec43a55575a8f\",\"filename\":\"backupsettingsOK.conf\"}]",
"id"=>"c83a35-96318REF-c83a355bc050"}
2 Jul 11:55:19 - c83a35-96318REF-c83a355bc050: Inform (6 CONNECTION REQUEST);
retry count 0
2 Jul 11:55:19 - c83a35-96318REF-c83a355bc050: Started task
download(55950a8747a4174005908152)
2 Jul 11:55:19 - c83a35-96318REF-c83a355bc050: Completed task
download(55950a8747a4174005908152)
Redirected to http://10.254.254.96:3000/devices/c83a35-96318REF-c83a355bc050
Completed 302 Found in 511ms (ActiveRecord: 0.0ms)
Thank you
El 02/07/15 a las 11:50, Sergio Fernández escribió:
Hello,
I've configured Tenda W300D to be managed by GenieACS. "Reboot" and > "Factory Reset" functions
inside GenieACS work. But when I send a > Configuration File to the router, it says it is "downloading"
but it > does nothing.
In the rails web log it shows:
2 Jul 11:39:47 - c83a35-96318REF-c83a355bc050: Inform (M Download,7 > TRANSFER
COMPLETE,2 PERIODIC); retry count 0
2 Jul 11:39:48 - c83a35-96318REF-c83a355bc050: Transfer complete
2 Jul 11:39:49 - c83a35-96318REF-c83a355bc050: Inform (M Download,7 > TRANSFER
COMPLETE,2 PERIODIC); retry count 0
2 Jul 11:39:49 - c83a35-96318REF-c83a355bc050: Transfer complete
Do you need more logs to know what is going on? Please tell me and I > send them
Hope you could help.
Thank you.
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
