We had to give up on ZyXEL because you cannot switch the CPE from routed to bridged mode via TR069.
My suggestion would be to do a factory reset, hold down the reset button until the power light turns red, then set the ip of your computer to 192.168.1.100, then browse to http://192.168.1.1/FRESET.html Then rebuild your config. -dan On Mon, Jul 6, 2015 at 6:56 AM, Dermot Williams <[email protected]> wrote: > Hi List, > > Does anyone have any experience using the Zyxel VMG8324 - or similar - > with ACS? > > I'm running into a problem with ours whereby the refreshObject task > consistently fails to complete due to the CPE generating a 9002 error > (general fault, if I recall correctly). > > My investigation reveals that this is because the CPE reports that it has > 8 instances under LANDevice.WLANConfiguration when in fact it only has 4. > When GenieACS requests LANDevice.WLANConfiguration.5.xxxx, the CPE > generates an error and the refreshObject task halts. > > I can fix this by downloading the CPE's configuration backup, which is an > XML file that seems to follow the same format as the TR69 data; if I open > it in a text editor and remove all references to WLANConfiguration.5, .6, > .7 and .8 (and their sub-nodes) and then upload the configuration back to > the CPE, refreshObject works fine. > > I've flagged this with our supplier and their answer is, basically, 'works > with our test ACS'. And, indeed, the initial parameter refresh seems to > work fine in the old install of NBBS that we have here (which is broken in > other ways, hence I want to move to Genie). > > Anyone have any thoughts? > > Thanks, > > Dermot > > _______________________________________________ > Users mailing list > [email protected] > http://lists.genieacs.com/mailman/listinfo/users > >
_______________________________________________ Users mailing list [email protected] http://lists.genieacs.com/mailman/listinfo/users
