Am 22.07.2015 um 18:23 schrieb Dan Morphis:
You need to figure out what the "key" value is for
Device.Services.VoiceService.1.NetworkProfile. The key value is the
parameter name/value that Genie will use to know it has the right
instance to configure. Find one of the parameters that never changes,
and make that your key.
On Tue, Jul 21, 2015 at 10:38 PM, Markus Mehlan
<[email protected] <mailto:[email protected]>> wrote:
Am 21.07.2015 um 19:05 schrieb Dan Morphis:
Go to the objects tab, and add a new object. Give it a name of "SIP
Line" For the parameter field, enter Enable and the value true,
SIPRef
and 1. Then figure out which entry is going to be your "key."
This is
the value that GenieACS will use to determine if the object
exists. See
the screenshot for an example.
Next, create a preset. One of the configuration options will be "Add
Object", for the object name enter "SIP Line" and for the "to"
portion
enter "Device.Services.VoiceService.1.NetworkProfile" For the
precondition portion, I use tags. For example, our CPE's can be
configured in either routed mode or bridged mode. If the CPE has
the tag
"Routed" it gets one preset, if it has the tag "Bridged" it gets
another
preset. You can even remove objects as well.
Inline image 1
Inline image 2
Inline image 3
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.genieacs.com/mailman/listinfo/users
Hi Dan,
if i follow your instructions, the acs wants to create a new instance of
NetworkProfile:
ACS sends ...
<SOAP-ENV:Body>
<cwmp:AddObject>
<ObjectName>
Device.Services.VoiceService.1.NetworkProfile.
</ObjectName>
<ParameterKey/>
</cwmp:AddObject>
</SOAP-ENV:Body>
Best regards,
Markus
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.genieacs.com/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
Hi Dan,
my problem was that my cpe didn't provide the object
"Device.Services.VoiceService.1.NetworkProfile.1.Line."
with the GetParameterNamesResponse during the first connect.
I fixed it and now it works.
Thank you,
Markus
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
