Thank you so much Michael. I already got it. It works perfect.
Regards, Jose Vela *Técnico de Networking Routing y Switching.* Mira mi perfil profesional y conecta conmigo en LinkedIn pinchando en este enlace. <https://mailtrack.io/trace/link/1757c19ab09c86cdb0e73c5bf55ec184b15a49e5?url=https%3A%2F%2Fes.linkedin.com%2Fin%2Fjose-vela-delgado&signature=168593e4eb67b6e3> 2017-02-27 18:18 GMT+01:00 Michael Ducharme <[email protected]>: > Have you tried adding a precondition for the preset, to only match a value > that would be present in the original config and not the autoconfig file? > Then it should not rerun the preset. > > The easiest thing would be to match the vendor config file name: > > InternetGatewayDevice.DeviceInfo.VendorConfigFile.1.Name > If your device has downloaded the config file that you are pushing down > with the preset, the name should be different than the original config the > device had, and you can tell them apart via that parameter. > > > On 2017-02-27 1:41 AM, Jose Vela Delgado wrote: > > Hello everyone. > > I have configured 0 BOOTSTRAP event in a PRESET. When you connect a CPE > that comes from the factory, it downloads our autoconfiguration file, that > is, that works perfect. > > The problem is that when the CPE is reinitiated to take the changes, the 0 > BOOTSTRAP event continues to appear and the autoconfiguration file is still > being downloaded, so it continues to restart. It is an infinite loop. > > This is the extract of all SOAP packets after the factory start. As you > can see, there is both 1 BOOT and 0 BOOTSTRAP: > > <Event > SOAP-ENC:arrayType="cwmp:EventStruct[4]"> > <EventStruct> > <EventCode> > 1 BOOT > </EventCode> > <CommandKey/> > </EventStruct> > <EventStruct> > <EventCode> > M Download > </EventCode> > <CommandKey> > 15a7ee58059000 > </CommandKey> > </EventStruct> > <EventStruct> > <EventCode> > 7 TRANSFER COMPLETE > </EventCode> > <CommandKey/> > </EventStruct> > <EventStruct> > <EventCode> > 0 BOOTSTRAP > </EventCode> > <CommandKey/> > </EventStruct> > </Event> > > > Do you know why this 0 BOOTSTRAP event still appears and if you know of > any way it will not reappear so that only PRESET is applied once? > > Thanks and regards, > > > Jose Vela > > *Técnico de Networking Routing y Switching. * > > > > Mira mi perfil profesional y conecta conmigo en LinkedIn pinchando en > este enlace. > <https://mailtrack.io/trace/link/871b78555d6b5e695f523cea111cff16fbb927d4?url=https%3A%2F%2Fes.linkedin.com%2Fin%2Fjose-vela-delgado&signature=278cbf155b94bb52> > > > > > > _______________________________________________ > Users mailing > [email protected]http://lists.genieacs.com/mailman/listinfo/users > > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.genieacs.com/mailman/listinfo/users > >
_______________________________________________ Users mailing list [email protected] http://lists.genieacs.com/mailman/listinfo/users
