Re: Incrementing interfaces

Tue, 10 Oct 2017 11:28:08 -0700

Hi,

declare ("InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.*", null, {path: 1}); or path: 2 or path: 3 works OK and creates 1 or 2 or 3 interfaces.
Problem occures later, I checked with tcpdump and it looks, that Genie sends:

InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.1.
instead of
InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.1.Name

and empty parameter/value.

Attached screenshot from wireshark - response for this was 9005

br,

W dniu 2017-10-10 o 18:57, Dan Morphis pisze:
What do the logs on the CPE have in them?

On Tue, Oct 10, 2017 at 1:23 AM, Margerita <[email protected]> wrote:
Thanks Dan,

I got your idea here, but I can't get it to work this way. I got 9005 error even with smallest configuration like this:

declare ("InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.*", null, {path: 1});
 declare ("InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.*.[Name:Routed]", {path:1}, {path: 1});

any ideas?

--
Michal

W dniu 2017-10-05 o 18:54, Dan Morphis pisze:
Try this :)

declare ("InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.*", null, {path: 2}); //Tell genie we want two interfaces
declare ("InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.*.[ConnectionType:IP_Routed,Name:Routed,Enable:true]", {path: 1}, {path: 1});
declare ("InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.*.[ConnectionType:IP_Bridged,Name:Bridged,Enable:true]", {path: 1}, {path: 1});

That will create two interfaces. If there are more interfaces than that, they will be deleted. If there are less than 2, then interfaces will be added until the count is 2. Then it will set the parameters to whats in the brackets.

-dan

On Thu, Oct 5, 2017 at 4:33 AM, Margerita <polanski.michal.mail@gmail.com> wrote:
Hi,

I would like to create two interfaces using Provision:

declare ("InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.*", null, {path: 1});
declare ("InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.*.ConnectionType", null, {value: "IP_Routed"});
declare ("InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.*", null, {path: 1});
declare ("InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.*.ConnectionType", null, {value: "IP_Bridged"});

and want to achieve the following effect:

InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.1
InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.1.ConnectionType IP_Routed
InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.2
InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANIPConnection.2.ConnectionType IP_Bridged

but whatever I put in path values, I always finish with only one interface or with two interfaces but both 'IP_Bridged'.
What is the correct method for achieving my goal?

--
Michal
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users



_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users


_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users




_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users




_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users

Reply via email to