Hi Michal, do you know the setup for the file server ip?
https://github.com/zaidka/genieacs/wiki/GenieACS-General-Config You can check with tcpdump port 7567 if you get requests on your file server .... Best Regards Michael Neumann -----Ursprüngliche Nachricht----- Von: Users [mailto:[email protected]] Im Auftrag von Margerita Gesendet: Mittwoch, 11. Oktober 2017 23:19 An: Community support for GenieACS users <[email protected]> Betreff: Upgrade with Provision Hi, I'm trying do make update with Provision script similar to one in Wiki: declare("Downloads.[FileType:1 Firmware Upgrade Image]", {path: 1}, {path: 1}); declare("Downloads.[FileType:1 Firmware Upgrade Image].FileName", {value: 1}, {value: "test.tar.gz"}); declare("Downloads.[FileType:1 Firmware Upgrade Image].Download", {value: 1}, {value: Date.now()}); but when doing it in this way CPE always try to download wrong, 'undefined' file: tr69c:215.523:downloadGetData:235:Download file cannot be found from http://192.168.8.3:7567/undefined failed. Status = 404 after searching what is wrong I found, that setting: declare("Downloads.[FileType:1 Firmware Upgrade Image]", {path: 1}, {path: 2}); sends file to CPE two times and second one is correct, so update is successful: tr69c:456.318:downloadGetData:235:Download file cannot be found from http://192.168.8.3:7567/undefined failed. Status = 404 tr69c:456.591:downloadGetData:235:Download file cannot be found from http://192.168.8.3:7567/test.tar.gz failed. Status = 404 (in exaple here I used non-existing filename 'test.tar.gz' to get it logged instead of upgrading CPE). What should be correct syntax to have this working without workaround I found? br, -- Michal _______________________________________________ Users mailing list [email protected] http://lists.genieacs.com/mailman/listinfo/users _______________________________________________ Users mailing list [email protected] http://lists.genieacs.com/mailman/listinfo/users
