The parameters are fetched from the device into the parameter list and
can be set through the parameter list as well.
Your question is slightly odd - it is kind of like asking if you make a
phone call and dial the correct number how to make sure that it gets
switched properly to the destination, or if you don't know how to drive
a car asking about how to get the spark plugs firing in the correct
sequence. The purpose of the system is to hide the complexity from you
for the most part, although with TR-069 you do tend to be closer to the
protocol than most systems.
On 10/17/2017 7:47 AM, Thomas Brown wrote:
Hello,
Get/SetParameterValues are the methods used by the ACS to do CPE
provisioning i.e.
http://djuro82.blogspot.ca/2011/05/tr-069-cpe-provisioning.html
How does one implement this using GenieACS? Can you please point me
to any relevant documentation, examples etc?
Cheers
*From:*Thomas Brown [mailto:[email protected]]
*Sent:* Monday, October 16, 2017 5:18 PM
*To:* '[email protected]'
*Subject:* Get/SetParameterValues
Hello,
What's the simplest and/or fastest way to implement
Get/SetParameterValues using GenieACS?
Cheers
Thomas Brown - Excelocity INC - 613 321 9530 ext 1021
http://www.excelocity.com/contact-us <../../../../Documents/Amadeo>
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.genieacs.com/mailman/listinfo/users
