ACS url needs to be a URL, not just an ip. I.e, https://ip:7547/
-dan > On Jul 12, 2018, at 5:54 AM, "[email protected]" > <[email protected]> wrote: > > Thank you for your reply. > > I an using Smart RG routers. The have TR-069 Built in and everything looks > pretty straight forward. > I am definitely doing something wrong here. > > Please take a look at the attached Image. > > Thank you. > > > <1531403638195.jpg> > > > > Sincerely, > Raman > Support Department > www.CloudConnexions.ca > > From: George Chelidze <[email protected]> > Sent: 7/12/18 2:49 AM > To: [email protected] > Subject: Re: Configure TR-069 Device >> On 07/11/2018 09:31 PM, [email protected] wrote: >> Hi, >> >> I have setup Genieacs GUI but not ablr to configure the device so it can >> show in the GUI. >> Can you help me setup? >> >> I have Installed it on remote server with Ubuntu 16.04 >> >> Thank you. >> > > Hi Raman, > > All you have to do on your device is to enable TR-069 and set ACS URL. By > default ACS listens on tcp port 7547 for CWMP (protocol for your CPE to > communicate with ACS). Make sure your CPE can reach this URL, enable > debugging in genieacs/config/config.json. You can also use tcpdump on Genie > machine to track incoming messages, if you don't see any incoming messages, > you have to concentrate on your CPE/network. > > Hope this helps. > > Best regards, > > George Chelidze > _______________________________________________ > Users mailing list > [email protected] > http://lists.genieacs.com/mailman/listinfo/users
_______________________________________________ Users mailing list [email protected] http://lists.genieacs.com/mailman/listinfo/users
