On 07.08.2018 13:25, Alexander Boettcher wrote: > U-Boot SPL 2015.10-00237-g92e40f5-dirty (Dec 04 2015 - 15:37:04) > U-Boot 2015.10-00237-g92e40f5-dirty (Dec 04 2015 - 15:37:04 +0100) > CPU: Freescale i.MX6Q rev1.2 at 792 MHz > Reset cause: POR > Board: Wandboard rev B1 > I2C: ready > DRAM: 2 GiB > MMC: FSL_SDHC: 0, FSL_SDHC: 1 > No panel detected: default to HDMI > Display: HDMI (1024x768) > In: serial > Out: serial > Err: serial > Net: FEC [PRIME] > Hit any key to stop autoboot: 1 0 > FEC Waiting for PHY auto negotiation to complete.... done > BOOTP broadcast 1 > DHCP client bound to address X.X.X.X (2 ms) > Using FEC device > TFTP from server X.X.X.X; our IP address is X.X.X.X > Filename '/tftpboot/hosts/wandboard.scr'.
The relevant configuration snippet to build the wandboard.scr is setenv serverip X.X.X.X tftp 0x50000000 /wand_quad/uImage bootm 0x50000000 > Using FEC device > TFTP from server X.X.X.X; our IP address is X.X.X.X > Filename '/tftpboot/wand_quad/uImage'. > Load address: 0x50000000 -- Alexander Boettcher Genode Labs https://www.genode-labs.com - https://www.genode.org Genode Labs GmbH - Amtsgericht Dresden - HRB 28424 - Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth _______________________________________________ Genode users mailing list [email protected] https://lists.genode.org/listinfo/users
