Thanks, Michael for suggesting the uboot tools. I generated the uImage successfully. Now to boot the image on QEMU I first tried to get the log.img using *make run/log KERNEL=hw BOARD=rpi3 VERBOSE=* by adding QEMU_RUN_OPT := --include image/disk But could not figure out to resolve the problem that the kernel is not getting loaded. Also, guide me if I can do something with uImage(var/run/log/boot/uImage) to get the GUI in QEMU.
Best..., DHIRAJ On Sat, Feb 4, 2023 at 4:30 PM Michael Grunditz <michael.grund...@gmail.com> wrote: > On Sat, 4 Feb 2023 at 05:58, DHIRAJ PRAJAPATI > <dhirajprajapat...@gmail.com> wrote: > > > > Thanks, Martin for your quick response. > > > > I followed your steps and generated the > > genode/build/arm_v8a/var/run/log/boot/image.elf. > > While going to the real hardware I got stuck for > > boot/uImage(var/run/log/boot/uImage) getting the following error. > > Kindly guide me on how to proceed further. > > Install the tool "mkimage". In ubuntu: > sudo apt-get install u-boot-tools > > Michael > > _______________________________________________ > Genode users mailing list > users@lists.genode.org > https://lists.genode.org/listinfo/users >
error
Description: Binary data
_______________________________________________ Genode users mailing list users@lists.genode.org https://lists.genode.org/listinfo/users