Hello Johnny, On Tue, Mar 28, 2023 at 15:30:09 CEST, Johnny Nunez wrote: > i am using ASRock imb-195 , now i am getting Sculpt to load and stay on,
The motherboard specs look promising from a quick look at [1] (Intel Kabylake/Skylake, Intel Gen9 graphics, Intel NICs). Would you mind to disclose, which CPU you equipped the board with? > but right after it does this usb's ports die > and i have no way of interacting with os, i see the mouse cursor and the > whole screen looks good As I have no experience with the used hardware I'm afraid you had to take further tests on your side and provide more debug information. Therefore, you may prepare an USB thumb drive as used file system on a fully supported machine (or in VirtualBox maybe). Add the "Tools -> report_dump" utility to the deploy configuration and make the config persistent (see [2]). Then, test the configuration on the "good" machine and you'll find report_dump stored information of the /report file system on the thumb drive. Now, please boot the imb-195 with the stick to gather information about the failing boot. If you find anything suspicious in /report/log, you may share the log lines (and maybe info from 22.10/drivers/). For the USB issue log lines starting with [drivers -> usb_drv] are of interest. [1] https://www.asrockind.com/en-gb/IMB-195 [2] https://genode.org/documentation/articles/sculpt-22-10#Making_customizations_permanent Regards -- Christian Helmuth Genode Labs https://www.genode-labs.com/ · https://genode.org/ https://twitter.com/GenodeLabs · https://genodians.org/ Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth _______________________________________________ Genode users mailing list users@lists.genode.org https://lists.genode.org/listinfo/users