Hallo Jack, > Hello, I have 4 NVME SSD's in my laptop. However, the Leitzentrale > only allows shows me the NVME1 slot, but it will not display NVME2, > NVME3 or NVME4 to select. I wanted to use a SSD that was in the 4 > slot, so I physically had to swap the SSD in slot 4 with slot 1 with > so I could select the desired SSD for sculptOS to format and use on > the NVME1 slot. > > I am not sure if this is just a GUI bug, or if the other 3 NVME SSD's > are simply not being detected by the OS?
Sculpt is configured in way that it only manages the first NVMe device it finds and thus is limited to making use of this particular device for the GENODE partition. So physically swapping devices, when possible, is the most straight-forward solution at the moment. That being said, you can modify Sculpt so that it will select a different NVMe device and additionally also allow for using the other NVMe devices for data storage. However, that involves building your own Sculpt image for now - but if you are willing to do that, I can give you a description of the necessary modifications. Regards Josef -- Josef Söntgen Genode Labs http://www.genode-labs.com/ · http://genode.org/
signature.asc
Description: PGP signature
_______________________________________________ users mailing list -- [email protected] To unsubscribe send an email to [email protected] Archived at https://lists.genode.org/mailman3/hyperkitty/list/[email protected]/message/7BDSK4SIXFWJFMBWA5KTWROKE2BHZIR7/
