so it will become like this?
failure_route[1] {
# status is 408 if openser session timer fires
if (t_check_status("408")) {
$ru = "sip:"+$rU + "@" + $avp(s:failure_ip) + ":" + $avp(s:failure_port);
*append_branch();*
t_relay();
}
On Fri, Aug 8, 2008 at 11:06 AM, Mouncif Benniane <[EMAIL PROTECTED]>wrote:
> I did add it but still not working; my server sends a 500 error to the
> voip provider(216.120.x.x), and keeps trying to connect to the
> non-responsive ip:
>
>
>
> U 206.225.x.x:5060 -> 216.120.x.x:5060
> SIP/2.0 500 Server error occurred (19/SL)..Via: SIP/2.0/UDP 216.120.x.x
> ;branch=z9hG4bKf42f.9549f9f5.0..Via: SIP/2.0/UDP 64.24.35.x;branch=z9hG4b
> Kf42f.96ada2e1.0..Via: SIP/2.0/UDP
> 64.24.35.x;rport=5060;branch=z9hG4bK972
> rXHc84KemN..From: "617947xxxx" <sip:[EMAIL PROTECTED]
> >;tag=0H5H6t1g0mZ
> 2N..To: <sip:[EMAIL PROTECTED]
> >;tag=e7c1de645436136957f0348d11a34701.
> 6d26..Call-ID: 59df6cc7-dffc-122b-cfad-0030487d3edc..CSeq: 102985214
> INVITE
> ..Openser..Content-Length: 0....
>
>
>
>
> On Fri, Aug 8, 2008 at 10:37 AM, Daniel-Constantin Mierla <
> [EMAIL PROTECTED]> wrote:
>
>> Hello,
>>
>> after setting the $ru in failure route you need to call append_branch()
>>
>> Cheers,
>> Daniel
>>
>>
>> On 08/08/08 16:58, Mouncif Benniane wrote:
>>
>>> I am using openser 1.3, I can't make the failure_route to work properly.
>>>
>>> here is my config:
>>>
>>> modparam("tm", "fr_timer", 2) # set fr_timer
>>>
>>>
>>> route{
>>>
>>> if (is_method("INVITE")) {
>>>
>>> avp_delete("*");
>>>
>>> if (avp_db_query("SELECT
>>> prefix,grp_id,priority,custid,did,ip,port,failure_set,failure_i
>>> p,failure_port FROM test_table WHERE
>>> prefix='$rU'","$avp(s:prefix);$avp(s:grp_id);$avp(s:priority);$avp(s:custid);$avp(s:did);$avp(s:ip);$avp(s:port
>>> );$avp(s:failure_set);$avp(s:failure_ip);$avp(s:failure_
>>> port)")) {
>>>
>>>
>>> $ru = "sip:"+$rU + "@" + $avp(s:ip) + ":" + $avp(s:port);
>>>
>>>
>>>
>>> if ($avp(s:failure_set) == y ) {
>>> $avp(i:3) = 3;
>>> t_on_failure("1");
>>> t_relay();
>>>
>>> }
>>>
>>>
>>> }
>>>
>>> } else {
>>> xlog("L_NOTICE", "avp_db_query() returned no records or failed
>>> query\n");
>>> };
>>>
>>> }
>>> ### END OF ROUTING
>>>
>>>
>>>
>>> failure_route[1] {
>>>
>>> # status is 408 if openser session timer fires
>>> if (t_check_status("408")) {
>>>
>>> $ru = "sip:"+$rU + "@" + $avp(s:failure_ip) + ":" + $avp(s:failure_port);
>>> t_relay();
>>>
>>> }
>>>
>>> }
>>>
>>>
>>> route[1] {
>>> # send it out now; use stateful forwarding as it works reliably
>>> # even for UDP2TCP
>>> if (!t_relay()) {
>>> sl_reply_error();
>>> };
>>> exit;
>>> }
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> So I set ip field to no responsive one and failure_ip to responsive one,
>>> but still the invite does not fail to the last one (failure_ip) after the
>>> timeout.
>>> Am I doing something wrong?
>>>
>>>
>>> cheers!!
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users@lists.kamailio.org
>>> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>
>> --
>> Daniel-Constantin Mierla
>> http://www.asipto.com
>>
>>
>
_______________________________________________
Users mailing list
Users@lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
