Daniel Corbe wrote:
> Is there a way to save the contact binding on the reply?
> save("location") throws an error that says it cannot be used in reply
> blocks.
Yes, this is a known problem. For such usage I think a dedicated module
(e.g. "relay_register) is needed.
regards
klaus
PS: if the registrar supports Path then you could use the Path feature.
>
> Thanks.
>
> -Daniel
>
> Nov 2 02:21:27 [61791] CRITICAL:core:yyerror: parse error in config
> file, line 417, column 10-11: Command cannot be used in the block
>
> onreply_route[2]
> {
> if (status =~ "2[0-9][0-9]")
> {
> save("location");
> };
> }
>
> If I can't use the save("location") in the onreply block, then how do I
> cache the contact binding?
>
> Is there a way to do it from within a module? I might consider coding
> something up if that is the case. What module does the save command
> live in?
>
> On Fri, Oct 31, 2008 at 1:47 AM, Daniel-Constantin Mierla
> <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> wrote:
>
> Hello,
>
>
> On 10/30/08 01:10, Daniel Corbe wrote:
>
> Guys,
>
> When attempting to pass REGISTER requests up stream I get the
> following error messages on the console (below). This also
> brings up the question of "what is the best way to simply pass
> REGISTER requests on to an upstream registrar?"
>
> Thanks for the help.
>
> -Daniel
>
>
> REGISTER: NATed client, enabling NAT
> Oct 29 18:03:58 [48175] ERROR:tm:t_forward_nonack: no branch for
> forwarding
> Oct 29 18:03:58 [48175] ERROR:tm:w_t_relay: t_forward_nonack failed
> Oct 29 18:03:58 [48175] ERROR:tm:t_forward_nonack: no branch for
> forwarding
> Oct 29 18:03:58 [48175] ERROR:tm:w_t_relay: t_forward_nonack failed
> Oct 29 18:03:59 [48175] CRITICAL:tm:t_should_relay_response:
> pick_branch failed (lowest==-1) for code 401
>
> Here's the relevant parts of my ser config;
>
> in route[1]
>
> route[1]
> {
> ...
> if (method == "REGISTER")
> {
> route(2);
> }
> route(1);
> }
>
> route[2]
> {
> # Check to see if the UAC is trying to UNREGISTER. If
> not test
> # for NAT. If NAT is present, we mark it as such before
> we save()
> # the location, that way flag 6 is always set for NATed UAs.
> if (!search("^Contact:[ ]*\*") && nat_uac_test("19")) {
> xlog("L_NOTICE", "REGISTER: NATed client,
> enabling NAT\n");
> setflag(6);
> fix_nated_register();
> force_rport();
> };
>
> # We must handle replies for registrations, for caching
> and location
> # tracking purposes.
> t_on_reply("1");
> t_on_failure("1");
>
> # Check for digest
> #if (radius_www_authorize(""))
> #{
> # xlog("L_NOTICE", "REGISTER: No Digest, sending
> challenge\n");
> # www_challenge("", "0");
> # exit;
> #}
>
> # Digest was good if we get here
> #save("location");
>
> # Relay register to porta
> t_relay("216.151.143.69 <http://216.151.143.69>
> <http://216.151.143.69>");
>
> }
>
> onreply_route[2]
> {
> if (status =~ "2[0-9][0-9]")
> {
> # save("location");
> };
> }
>
> you need a line with:
>
> exit;
>
> at the end of route[2]. Also, there seem to be looping in route[1]
> if you handle non-REGISTER.
>
> Cheers,
> Daniel
>
> --
> Daniel-Constantin Mierla
> http://www.asipto.com
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Users mailing list
> Users@lists.kamailio.org
> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
