Hey guys,
Still facing a few challenges and seeing if any further input, I'm
specifically trying inaki's suggestions / method, but here are the current
problems:
sip:/etc/kamailio/m4cfgs# tail -f /var/log/openser.log | grep -v -E
'non-local|repeated' | grep branch_route
Apr 29 07:38:05 db06 /sbin/kamailio[21279]:
[77e4c600-14776...@172.16.1.35][branch_route][1]
ru=sip:cal...@99.xx.xx.xx:5079
fu=sip:cal...@sip.example.com<sip%3acal...@sip.example.com>tu=
sip:cal...@sip.example.com <sip%3acal...@sip.example.com> si=99.XX.XX.XX
flag=96 du=<null>
This call is not sent to Proxy B (this is a result of bflag not being set)
??? My question is "Why", I look at the AOR / usrloc and they both have the
"same exact flags set", this call is rather sent directly to UAC endpoint.
---
Apr 29 07:38:05 db06 /sbin/kamailio[21279]:
[77e4c600-14776...@172.16.1.35][branch_route][2]
ru=sip:cal...@99.xx.xx.xx:5062
fu=sip:cal...@sip.example.com<sip%3acal...@sip.example.com>tu=
sip:cal...@sip.example.com <sip%3acal...@sip.example.com> si=99.XX.XX.XX
flag=64 du=sip:PROXY_B;transport=udp;
This call is sent to Proxy B (however Proxy B) - however the X-Duri (is
null) as it is not existant in Proxy A's branch route? should I save this
from right after the lookup("location") result into an avp?
Again, thank you for all and any help, thanks!
On Mon, Apr 27, 2009 at 5:42 PM, Brandon Armstead <bran...@cryy.com> wrote:
> Klaus, Inaki, Daniel,
>
> Thanks! Sorry I did not see this email come through, I'm going to go
> ahead and give this method a go, and I'll update with the results, I have
> optimistic views.
>
> As for the reason I was rewriting $ru and setting $du to null, is because
> originally when I just changed $du to the 'destination proxy' it did not
> seem to work at all (I do not even recall what exactly what was happening)
> however I decided to just change $ru, and have the other proxy just "lookup"
> the usrloc information again. Again, this method looks interesting and I'll
> let you guys know how it goes, thanks for all the input and help!
>
> Sincerely,
> Brandon.
>
>
> On Fri, Apr 24, 2009 at 1:18 AM, Klaus Darilion <
> klaus.mailingli...@pernau.at> wrote:
>
>>
>>
>> Brandon Armstead schrieb:
>>
>>> Klaus,
>>>
>>> So I took you and Inaki's input and essentially constructed a setup
>>> like so after the lookup("location") call:
>>>
>>> if(isbflagset(1)){
>>> $du = null;
>>> $rd = "P1";
>>> } else if(isbflagset(2)){
>>> $du = null;
>>> $rd = "P2";
>>> } else if(isbflagset(3)){
>>> $du = null;
>>> $rd = "P3";
>>> } else if(isbflagset(4)){
>>> $du = null;
>>> $rd = "P4";
>>> }
>>>
>>
>> 1. The above code has to be in the branch_route block - otherwise multiple
>> registrations of a single user are not handled correctly.
>>
>> 2. you are rewriting the RURI. You should not do that as some clients
>> wants to the in the RURI the Contact provided during REGISTER.
>>
>> 3. probably you use fix_nated_register() to store the public IP:port of
>> the client too. After lookup, this information is written to DURI. Thus, by
>> setting $du you overwrite this info. You should put it into a special header
>> so that you can restore it in the other proxy.
>>
>> Here a snippet how it should work (untested, no warranty): ( I use the
>> term "originating" proxy for the proxy which received the INVITE and the
>> term "serving" proxy for the proxy which handles the connection/registration
>> of a certain SIP client).
>>
>> e.g:
>> Alice -----INVITE-----> P1------->P2----->Bob2
>> / \
>> / \
>> / V
>> V P3---->Bob3
>> Bob1
>>
>> Bob's client Bob1 is connected to P1.
>> Bob's client Bob2 is connected to P2.
>> Bob's client Bob3 is connected to P3.
>>
>> So, P1 is the originating proxy. P2 is the serving proxy of Bob2. ....
>>
>> We do NAT traversal (note: we must not call fix_nated_contact() for
>> messages sent between the proxies!): the originating proxy for the call-leg
>> to the caller, the serving proxy for the call-leg to the callee.
>> The RTP proxy will be managed by the originating proxy only.
>>
>>
>>
>> route{
>> if (loose_route()) {
>> ... additional loose route processing...
>> if (check_route_param("rtpproxy=yes")) {
>> force_rtp_proxy();
>> setbflag(7);
>> }
>>
>> # downstream: in-dialog request is in the same direction as the
>> # initial request
>> if ( (check_route_param("nat=caller") && is_direction("downstream"))
>> || (check_route_param("nat=callee") && is_direction("upstream"))) {
>> fix_nated_contact();
>> } else if (check_route_param("nat=both") {
>> fix_nated_contact();
>> setbflag(8);
>> } else {
>> setbflag(8);
>> }
>>
>> t_on_reply("1");
>> t_relay();
>> exit();
>> }
>> ...
>>
>> # I am proxy 1
>> if ((src_ip=ip.of.proxy.2) || (src_ip=ip.of.proxy.3)...) {
>> # request comes from other proxy, that means I am the
>> # serving proxy
>> # do not lookup(), RURI is already set and
>> # DURI is provided in our X-DURI header
>> $du = $header(X-DURI);
>> # we do not care about an RTP proxy because that's the task of the
>> # proxy which performed the lookup() (the originating proxy)
>> # add some record-route cookie to mark that we should perform
>> # SIP NAT traversal for the callee
>> add_rr_param(";nat=callee");
>> # activate reply_route to fix_nated_contact of callee
>> setbflag(8); # flag 8 = fix contact
>> t_on_reply("1");
>> record_route();
>> t_relay();
>> exit;
>> }
>>
>> ...
>> # a new request - thus I am the originating proxy
>>
>> if ($dU looks like phone number) {
>> ... route to Gateway....
>> exit;
>> }
>>
>> if (!lookup("location")) {
>> sl_send_reply("404","not found");
>> exit;
>> }
>> # activate branch route to have dedicated routing per branch
>> t_on_branch("1");
>>
>> # activate reply route to activate RTP proxy
>> t_on_reply("1");
>>
>> # NAT traversal
>> fix_nated_contact();
>>
>> record_route();
>> t_relay();
>> exit;
>> }
>>
>> branch_route[1]{
>> if(isbflagset(1)){
>> # oh, that's me
>>
>> # add some record-route cookie to mark that we should perform
>> # SIP NAT traversal for the callee and caller
>> add_rr_param(";nat=both");
>>
>> # add some record-route cookie to mark that we are
>> # in charge for the RTP proxy
>> add_rr_param(";rtpproxy=yes");
>>
>> force_rtp_proxy();
>> setbflag(7); # flag 7 = RTP proxy
>> } else {
>> # add some record-route cookie to mark that we should perform
>> # SIP NAT traversal for the caller
>> add_rr_param(";nat=caller");
>>
>> # we have to route the request to the serving proxy
>> # write DURI in the header
>> append_hf("X-DURI: $du");
>> if(isbflagset(2)){
>> $du = sip:ip.of.proxy.2;transport=udp;
>> } else if(isbflagset(3)){
>> $du = sip:ip.of.proxy.3;transport=udp;
>> } else if(isbflagset(4)){
>> $du = sip:ip.of.proxy.4;transport=udp;
>> }
>> }
>> }
>>
>> reply_route[1]{
>> if (isbflagset(7) && has_body("application/sdp")) {
>> force_rtp_proxy()
>> }
>> if (isbflagset(8)) {
>> fix_nated_contact()
>> }
>> }
>>
>>
>>
>> Note: this code does not care about the received socket of the proxy. Thus
>> it works if the proxy listens only on one port.
>>
>> regards
>> klaus
>>
>>
>> On each Proxy, I changed the code appropriately excluding the Proxy from
>>> itself (so it does not forward to itself). I'm noticing weird behavior
>>> however as it seems as if what is happening is it created other issues such
>>> as:
>>>
>>> [INCOMING SERVER] -> P1 -> P2 -> P1 -> (loop?)
>>>
>>> Also I setup this test amongst two development servers (in which case it
>>> worked without issues). Once I included in more development instances into
>>> the ring it seemed as if the flags were being set when they should not be?
>>>
>>> I.e. I placed a call FROM UA1 (with bflag 5 SET) From the above example
>>> configuration ^ code. If you notice (flag 5) is missing. To UA2 (Flag 3),
>>> again this looked to be doing some strange things such as acting as if
>>> another flag was set when it should not have been, thus forwarding to the
>>> wrong proxy or the wrong proxy order. Do you guys have any further thoughts
>>> or input on this? Thanks!
>>>
>>> On Thu, Apr 23, 2009 at 12:31 AM, Klaus Darilion <
>>> klaus.mailingli...@pernau.at <mailto:klaus.mailingli...@pernau.at>>
>>> wrote:
>>>
>>> Hi Brandon!
>>>
>>> Back to the original email ....
>>>
>>> Brandon Armstead schrieb:
>>>
>>> Hello guys,
>>>
>>> Is there a method upon using lookup("location") to also pull
>>> out the "socket" information for the original location the UAC
>>> registered to, for scenarios of this example:
>>>
>>> P1 & P2 share same usrloc database.
>>>
>>> UA1 registers to P1
>>> UA2 registers to P2
>>>
>>> UA1 calls UA2
>>>
>>> UA1 invites -> P1 -> INVITES -> UA2 (bypassing P2 -- where the
>>> actual nat binding is).
>>>
>>> Now upon P1 looking up usrloc for UA2, I would like to recognize
>>> that P1 is not the Proxy to deliver the call, and forward the
>>> request to P2 to send to UA2.
>>>
>>> So currently I have:
>>>
>>> UA1 INVITE -> P1 INVITE -> UA2
>>>
>>> I wish to have:
>>>
>>> UA1 INVITE -> P1 INVITE -> P2 INVITE -> UA2
>>>
>>> Is there an easy method to do this? I have been looking at the
>>> new nat traversal module it looks like it is doable with this
>>> (any further input as far as that?). Also is it possible with
>>> the classic Nat Helper module? Any input is appreciated, thanks!
>>>
>>>
>>> I think the nat_traversal module can not help you in this case, nor
>>> nathelper.
>>>
>>> One possibility would be to spoof at P1 the IP address of P2 -
>>> nevertheless this would cause the reply sent back to P2, but the
>>> transaction is created in P1. (and you need to hack Kamailio for IP
>>> spoofing).
>>>
>>> Another easy solution would be: In P1 set a certain branch-flag when
>>> the client registers, e.g. bflag 1. In P2 set a certain branch-flag
>>> when the client registers, e.g. bflag 2.
>>>
>>> Now, if a user is called, just make a lookup() and t_relay. Further
>>> in the branch_route check if:
>>> in P1: isbflagset(2) --> forward to P2
>>> in P2: isbflagset(1) --> forward to P1
>>>
>>> klaus
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Kamailio (OpenSER) - Users mailing list
>>> Users@lists.kamailio.org <mailto:Users@lists.kamailio.org>
>>> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>>> http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>>>
>>>
>>>
>
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
