Dear list admin:
I am sorry for inadvertently creating a new thread. Please feel free to delete
that one. I pasted its content to this thread, but couldn't delete that myself.
Thanks!
I was able to achieve what I wanted to do by the /etc/network/interfaces file
posted below on the host. KVM/QEMU does not accept the bridge notation with
dots in it, such as bridge0.20. Instead, one needs to create a separate vlan
definition and a bridge on top of that vlan. This would create an access port
for the VMs that use that bridge. What I was trying to do was to create a trunk
port on a bridge, and by the static IP chosen for VMs, let each VM claim their
VLANs. In this working
version, the access ports claim the VLAN that the VM would belong to instead. I
hope that this would help people avoid the suffering Iendured during the last
week to achieve this, lol!
[code]
auto lo
iface lo inet loopback
# bond interface
auto bond0
iface bond0 inet manual
bond-slaves enp5s0 enp6s0
bond-mode 802.3ad
bond-xmit-hash-policy layer2+3
bond-miimon 100
bond-lacp-rate 1
# vlan 20
auto vlan20
iface vlan20 inet manual
vlan-id 20
vlan-raw-device bridge0
auto bridge20
iface bridge20 inet manual
bridge-ports vlan20
# bridge interface
auto bridge0
iface bridge0 inet manual
bridge-ports bond0
bridge_stp on
bridge_fd 2
bridge_maxwait 0
bridge-vlan-aware yes
bridge-vids 1-500
auto bridge0.1
iface bridge0.1 inet static
address 192.168.1.130/24
gateway 192.168.1.1
[/code]
_______________________________________________
Users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
