Hi Jeff and Tony, I just tried 1.2.2 on my Itanium and got the same error.
Our code uses 1.2.2, but I built it back in 2007 with V8 of the compiler. Now I am using V10.1. So, perhaps the code is incompatible with Intel V10.1. Joe > -----Original Message----- > From: users-boun...@open-mpi.org [mailto:users-boun...@open-mpi.org] On > Behalf Of Jeff Squyres > Sent: Sunday, February 01, 2009 3:42 AM > To: Open MPI Users > Subject: Re: [OMPI users] Joe Griffin: "Re: Cannot compile onLinuxItanium > system" > > I'm afraid I don't have access to any Itaniums, so debugging this will > be difficult. > > The source file between OMPI v1.2 and OMPI v1.3 should be the same. > So *something* is different between the two. Can one of you examine > the output of "make" to determine what is different? > > - check the specific compile command for the two versions: > - see if any different assemblers/flags/etc. flags are being used > - verify that the same file is being compiled (please also check > these files with diff to ensure that they really are the same) > - check the output of the compile after the preprocessor has been > applied (probably via the -E switch to the specific compiler/assembler > command) and see if there are differences in what is actually being > compiled > > > > On Jan 29, 2009, at 2:32 PM, Joe Griffin wrote: > > > Tony, > > > > I had tried just the compile line using -O0, but it did not help. > > The last > > assembly I actually wrote was for a Cray Y-MP I think, so I don't > > intend on > > delving into that. > > > > Sorry I couldn't be more help. > > I do have access to what I call a Frankenstein Cluster of Itaniums > > ( different > > manufactures and different OS's) to support our clients, so I don't > > mind > > testing. > > > > Sorry I could not help, > > Joe > > > > > > > > From: users-boun...@open-mpi.org [mailto:users-boun...@open-mpi.org] > > On Behalf Of Iannetti, Anthony C. (GRC-RTB0) > > Sent: Thursday, January 29, 2009 11:22 AM > > To: Open MPI Users > > Subject: Re: [OMPI users] Joe Griffin: "Re: Cannot compile on > > LinuxItanium system" > > > > Joe, > > > > Intel recommends to set all of the compile flags, like CCFLAGS, to > > -O2. Other than than, we are doing nothing different than what > > Intel recommends. > > > > When I set CCAS=ias, ./configure does not make it through the > > Assembler stage. > > > > When I set CCAS=ias and CASFLAGS= (I am setting it to nothing), it > > makes it through the Assembler config stage and fails at another > > point in make. I will send another email with the actual errors. I > > thought I would relay this information to you, > > > > Tony > > > > Anthony C. Iannetti, P.E. > > > > NASA Glenn Research Center > > > > Aeropropulsion Division, Combustion Branch > > > > 21000 Brookpark Road, MS 5-10 > > > > Cleveland, OH 44135 > > > > phone: (216)433-5586 > > > > email: anthony.c.ianne...@nasa.gov > > > > > > Please note: All opinions expressed in this message are my own and > > NOT of NASA. Only the NASA Administrator can speak on behalf of NASA. > > > > > > _______________________________________________ > > users mailing list > > us...@open-mpi.org > > http://www.open-mpi.org/mailman/listinfo.cgi/users > > > -- > Jeff Squyres > Cisco Systems > > > _______________________________________________ > users mailing list > us...@open-mpi.org > http://www.open-mpi.org/mailman/listinfo.cgi/users