Same result.
I still suspect that rankfile claims for node in small hostlist provided by
line in the app file, and not from the hostlist provided by mpirun on HNP
node.
According to my suspections your proposal should not work(and it does not),
since in appfile line I provide np=1, and 1 host, while rankfile tries to
allocate all ranks (np=2).
$orte/mca/rmaps/rank_file/rmaps_rank_file.c at line 338
if(ORTE_SUCCESS != (rc = orte_rmaps_base_get_target_nodes(&node_list,
&num_slots, app,
map->policy))) {
node_list will be partial, according to app, and not full provided by mpirun
cmd. If I didnt provide hostlist in the appfile line, mpirun uses local host
and not hosts from the hostfile.
Tell me if I am wrong by expecting the following behaivor
I provide to mpirun NP, full_hostlist, full_rankfile, appfile
I provide in appfile only partial NP and partial hostlist.
and it works.
Currently, in order to get it working I need to provide full hostlist in the
appfile. Which is quit a problematic.
$mpirun -np 2 -rf rankfile -app appfile
--------------------------------------------------------------------------
Rankfile claimed host +n1 by index that is bigger than number of allocated
hosts.
--------------------------------------------------------------------------
[dellix7:17277] [[23928,0],0] ORTE_ERROR_LOG: Bad parameter in file
../../../../../orte/mca/rmaps/rank_file/rmaps_rank_file.c at line 422
[dellix7:17277] [[23928,0],0] ORTE_ERROR_LOG: Bad parameter in file
../../../../orte/mca/rmaps/base/rmaps_base_map_job.c at line 85
[dellix7:17277] [[23928,0],0] ORTE_ERROR_LOG: Bad parameter in file
../../../../orte/mca/plm/base/plm_base_launch_support.c at line 103
[dellix7:17277] [[23928,0],0] ORTE_ERROR_LOG: Bad parameter in file
../../../../../orte/mca/plm/rsh/plm_rsh_module.c at line 1001
Thanks
Lenny.
On Wed, Jul 15, 2009 at 2:02 PM, Ralph Castain <r...@open-mpi.org> wrote:
> Try your "not working" example without the -H on the mpirun cmd line -
> i.e.,, just use "mpirun -np 2 -rf rankfile -app appfile". Does that work?
> Sorry to have to keep asking you to try things - I don't have a setup here
> where I can test this as everything is RM managed.
>
>
> On Jul 15, 2009, at 12:09 AM, Lenny Verkhovsky wrote:
>
>
> Thanks Ralph, after playing with prefixes it worked,
>
> I still have a problem running app file with rankfile, by providing full
> hostlist in mpirun command and not in app file.
> Is is planned behaviour, or it can be fixed ?
>
> See Working example:
>
> $cat rankfile
> rank 0=+n1 slot=0
> rank 1=+n0 slot=0
> $cat appfile
> -np 1 -H witch1,witch2 ./hello_world
> -np 1 -H witch1,witch2 ./hello_world
>
> $mpirun -rf rankfile -app appfile
> Hello world! I'm 1 of 2 on witch1
> Hello world! I'm 0 of 2 on witch2
>
> See NOT working example:
>
> $cat appfile
> -np 1 -H witch1 ./hello_world
> -np 1 -H witch2 ./hello_world
> $mpirun -np 2 -H witch1,witch2 -rf rankfile -app appfile
> --------------------------------------------------------------------------
> Rankfile claimed host +n1 by index that is bigger than number of allocated
> hosts.
> --------------------------------------------------------------------------
> [dellix7:16405] [[24080,0],0] ORTE_ERROR_LOG: Bad parameter in file
> ../../../../../orte/mca/rmaps/rank_file/rmaps_rank_file.c at line 422
> [dellix7:16405] [[24080,0],0] ORTE_ERROR_LOG: Bad parameter in file
> ../../../../orte/mca/rmaps/base/rmaps_base_map_job.c at line 85
> [dellix7:16405] [[24080,0],0] ORTE_ERROR_LOG: Bad parameter in file
> ../../../../orte/mca/plm/base/plm_base_launch_support.c at line 103
> [dellix7:16405] [[24080,0],0] ORTE_ERROR_LOG: Bad parameter in file
> ../../../../../orte/mca/plm/rsh/plm_rsh_module.c at line 1001
>
>
>
> On Wed, Jul 15, 2009 at 6:58 AM, Ralph Castain <r...@open-mpi.org> wrote:
>
>> Took a deeper look into this, and I think that your first guess was
>> correct.
>> When we changed hostfile and -host to be per-app-context options, it
>> became necessary for you to put that info in the appfile itself. So try
>> adding it there. What you would need in your appfile is the following:
>>
>> -np 1 -H witch1 hostname
>> -np 1 -H witch2 hostname
>>
>> That should get you what you want.
>> Ralph
>>
>> On Jul 14, 2009, at 10:29 AM, Lenny Verkhovsky wrote:
>>
>> No, it's not working as I expect , unless I expect somthing wrong .
>> ( sorry for the long PATH, I needed to provide it )
>>
>> $LD_LIBRARY_PATH=/hpc/home/USERS/lennyb/work/svn/ompi/trunk/build_x86-64/install/lib/
>> /hpc/home/USERS/lennyb/work/svn/ompi/trunk/build_x86-64/install/bin/mpirun
>> -np 2 -H witch1,witch2 hostname
>> witch1
>> witch2
>>
>> $LD_LIBRARY_PATH=/hpc/home/USERS/lennyb/work/svn/ompi/trunk/build_x86-64/install/lib/
>> /hpc/home/USERS/lennyb/work/svn/ompi/trunk/build_x86-64/install/bin/mpirun
>> -np 2 -H witch1,witch2 -app appfile
>> dellix7
>> dellix7
>> $cat appfile
>> -np 1 hostname
>> -np 1 hostname
>>
>>
>> On Tue, Jul 14, 2009 at 7:08 PM, Ralph Castain <r...@open-mpi.org> wrote:
>>
>>> Run it without the appfile, just putting the apps on the cmd line - does
>>> it work right then?
>>>
>>> On Jul 14, 2009, at 10:04 AM, Lenny Verkhovsky wrote:
>>>
>>> additional info
>>> I am running mpirun on hostA, and providing hostlist with hostB and
>>> hostC.
>>> I expect that each application would run on hostB and hostC, but I get
>>> all of them running on hostA.
>>> dellix7$cat appfile
>>> -np 1 hostname
>>> -np 1 hostname
>>> dellix7$mpirun -np 2 -H witch1,witch2 -app appfile
>>> dellix7
>>> dellix7
>>> Thanks
>>> Lenny.
>>>
>>> On Tue, Jul 14, 2009 at 4:59 PM, Ralph Castain <r...@open-mpi.org> wrote:
>>>
>>>> Strange - let me have a look at it later today. Probably something
>>>> simple that another pair of eyes might spot.
>>>> On Jul 14, 2009, at 7:43 AM, Lenny Verkhovsky wrote:
>>>>
>>>> Seems like connected problem:
>>>> I can't use rankfile with app, even after all those fixes ( working with
>>>> trunk 1.4a1r21657).
>>>> This is my case :
>>>>
>>>> $cat rankfile
>>>> rank 0=+n1 slot=0
>>>> rank 1=+n0 slot=0
>>>> $cat appfile
>>>> -np 1 hostname
>>>> -np 1 hostname
>>>> $mpirun -np 2 -H witch1,witch2 -rf rankfile -app appfile
>>>>
>>>> --------------------------------------------------------------------------
>>>> Rankfile claimed host +n1 by index that is bigger than number of
>>>> allocated hosts.
>>>>
>>>> --------------------------------------------------------------------------
>>>> [dellix7:13414] [[10851,0],0] ORTE_ERROR_LOG: Bad parameter in file
>>>> ../../../../../orte/mca/rmaps/rank_file/rmaps_rank_file.c at line 422
>>>> [dellix7:13414] [[10851,0],0] ORTE_ERROR_LOG: Bad parameter in file
>>>> ../../../../orte/mca/rmaps/base/rmaps_base_map_job.c at line 85
>>>> [dellix7:13414] [[10851,0],0] ORTE_ERROR_LOG: Bad parameter in file
>>>> ../../../../orte/mca/plm/base/plm_base_launch_support.c at line 103
>>>> [dellix7:13414] [[10851,0],0] ORTE_ERROR_LOG: Bad parameter in file
>>>> ../../../../../orte/mca/plm/rsh/plm_rsh_module.c at line 1001
>>>>
>>>>
>>>> The problem is, that rankfile mapper tries to find an appropriate host
>>>> in the partial ( and not full ) hostlist.
>>>>
>>>> Any suggestions how to fix it?
>>>>
>>>> Thanks
>>>> Lenny.
>>>>
>>>> On Wed, May 13, 2009 at 1:55 AM, Ralph Castain <r...@open-mpi.org>wrote:
>>>>
>>>>> Okay, I fixed this today too....r21219
>>>>>
>>>>>
>>>>> On May 11, 2009, at 11:27 PM, Anton Starikov wrote:
>>>>>
>>>>> Now there is another problem :)
>>>>>>
>>>>>> You can try oversubscribe node. At least by 1 task.
>>>>>> If you hostfile and rank file limit you at N procs, you can ask mpirun
>>>>>> for N+1 and it wil be not rejected.
>>>>>> Although in reality there will be N tasks.
>>>>>> So, if your hostfile limit is 4, then "mpirun -np 4" and "mpirun -np
>>>>>> 5" both works, but in both cases there are only 4 tasks. It isn't
>>>>>> crucial,
>>>>>> because there is nor real oversubscription, but there is still some bug
>>>>>> which can affect something in future.
>>>>>>
>>>>>> --
>>>>>> Anton Starikov.
>>>>>>
>>>>>> On May 12, 2009, at 1:45 AM, Ralph Castain wrote:
>>>>>>
>>>>>> This is fixed as of r21208.
>>>>>>>
>>>>>>> Thanks for reporting it!
>>>>>>> Ralph
>>>>>>>
>>>>>>>
>>>>>>> On May 11, 2009, at 12:51 PM, Anton Starikov wrote:
>>>>>>>
>>>>>>> Although removing this check solves problem of having more slots in
>>>>>>>> rankfile than necessary, there is another problem.
>>>>>>>>
>>>>>>>> If I set rmaps_base_no_oversubscribe=1 then if, for example:
>>>>>>>>
>>>>>>>>
>>>>>>>> hostfile:
>>>>>>>>
>>>>>>>> node01
>>>>>>>> node01
>>>>>>>> node02
>>>>>>>> node02
>>>>>>>>
>>>>>>>> rankfile:
>>>>>>>>
>>>>>>>> rank 0=node01 slot=1
>>>>>>>> rank 1=node01 slot=0
>>>>>>>> rank 2=node02 slot=1
>>>>>>>> rank 3=node02 slot=0
>>>>>>>>
>>>>>>>> mpirun -np 4 ./something
>>>>>>>>
>>>>>>>> complains with:
>>>>>>>>
>>>>>>>> "There are not enough slots available in the system to satisfy the 4
>>>>>>>> slots
>>>>>>>> that were requested by the application"
>>>>>>>>
>>>>>>>> but "mpirun -np 3 ./something" will work though. It works, when you
>>>>>>>> ask for 1 CPU less. And the same behavior in any case (shared nodes,
>>>>>>>> non-shared nodes, multi-node)
>>>>>>>>
>>>>>>>> If you switch off rmaps_base_no_oversubscribe, then it works and all
>>>>>>>> affinities set as it requested in rankfile, there is no
>>>>>>>> oversubscription.
>>>>>>>>
>>>>>>>>
>>>>>>>> Anton.
>>>>>>>>
>>>>>>>> On May 5, 2009, at 3:08 PM, Ralph Castain wrote:
>>>>>>>>
>>>>>>>> Ah - thx for catching that, I'll remove that check. It no longer is
>>>>>>>>> required.
>>>>>>>>>
>>>>>>>>> Thx!
>>>>>>>>>
>>>>>>>>> On Tue, May 5, 2009 at 7:04 AM, Lenny Verkhovsky <
>>>>>>>>> lenny.verkhov...@gmail.com> wrote:
>>>>>>>>> According to the code it does cares.
>>>>>>>>>
>>>>>>>>> $vi orte/mca/rmaps/rank_file/rmaps_rank_file.c +572
>>>>>>>>>
>>>>>>>>> ival = orte_rmaps_rank_file_value.ival;
>>>>>>>>> if ( ival > (np-1) ) {
>>>>>>>>> orte_show_help("help-rmaps_rank_file.txt", "bad-rankfile", true,
>>>>>>>>> ival, rankfile);
>>>>>>>>> rc = ORTE_ERR_BAD_PARAM;
>>>>>>>>> goto unlock;
>>>>>>>>> }
>>>>>>>>>
>>>>>>>>> If I remember correctly, I used an array to map ranks, and since
>>>>>>>>> the length of array is NP, maximum index must be less than np, so if
>>>>>>>>> you
>>>>>>>>> have the number of rank > NP, you have no place to put it inside
>>>>>>>>> array.
>>>>>>>>>
>>>>>>>>> "Likewise, if you have more procs than the rankfile specifies, we
>>>>>>>>> map the additional procs either byslot (default) or bynode (if you
>>>>>>>>> specify
>>>>>>>>> that option). So the rankfile doesn't need to contain an entry for
>>>>>>>>> every
>>>>>>>>> proc." - Correct point.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Lenny.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 5/5/09, Ralph Castain <r...@open-mpi.org> wrote: Sorry Lenny,
>>>>>>>>> but that isn't correct. The rankfile mapper doesn't care if the
>>>>>>>>> rankfile
>>>>>>>>> contains additional info - it only maps up to the number of
>>>>>>>>> processes, and
>>>>>>>>> ignores anything beyond that number. So there is no need to remove the
>>>>>>>>> additional info.
>>>>>>>>>
>>>>>>>>> Likewise, if you have more procs than the rankfile specifies, we
>>>>>>>>> map the additional procs either byslot (default) or bynode (if you
>>>>>>>>> specify
>>>>>>>>> that option). So the rankfile doesn't need to contain an entry for
>>>>>>>>> every
>>>>>>>>> proc.
>>>>>>>>>
>>>>>>>>> Just don't want to confuse folks.
>>>>>>>>> Ralph
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, May 5, 2009 at 5:59 AM, Lenny Verkhovsky <
>>>>>>>>> lenny.verkhov...@gmail.com> wrote:
>>>>>>>>> Hi,
>>>>>>>>> maximum rank number must be less then np.
>>>>>>>>> if np=1 then there is only rank 0 in the system, so rank 1 is
>>>>>>>>> invalid.
>>>>>>>>> please remove "rank 1=node2 slot=*" from the rankfile
>>>>>>>>> Best regards,
>>>>>>>>> Lenny.
>>>>>>>>>
>>>>>>>>> On Mon, May 4, 2009 at 11:14 AM, Geoffroy Pignot <
>>>>>>>>> geopig...@gmail.com> wrote:
>>>>>>>>> Hi ,
>>>>>>>>>
>>>>>>>>> I got the openmpi-1.4a1r21095.tar.gz tarball, but unfortunately my
>>>>>>>>> command doesn't work
>>>>>>>>>
>>>>>>>>> cat rankf:
>>>>>>>>> rank 0=node1 slot=*
>>>>>>>>> rank 1=node2 slot=*
>>>>>>>>>
>>>>>>>>> cat hostf:
>>>>>>>>> node1 slots=2
>>>>>>>>> node2 slots=2
>>>>>>>>>
>>>>>>>>> mpirun --rankfile rankf --hostfile hostf --host node1 -n 1
>>>>>>>>> hostname : --host node2 -n 1 hostname
>>>>>>>>>
>>>>>>>>> Error, invalid rank (1) in the rankfile (rankf)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> [r011n006:28986] [[45541,0],0] ORTE_ERROR_LOG: Bad parameter in
>>>>>>>>> file rmaps_rank_file.c at line 403
>>>>>>>>> [r011n006:28986] [[45541,0],0] ORTE_ERROR_LOG: Bad parameter in
>>>>>>>>> file base/rmaps_base_map_job.c at line 86
>>>>>>>>> [r011n006:28986] [[45541,0],0] ORTE_ERROR_LOG: Bad parameter in
>>>>>>>>> file base/plm_base_launch_support.c at line 86
>>>>>>>>> [r011n006:28986] [[45541,0],0] ORTE_ERROR_LOG: Bad parameter in
>>>>>>>>> file plm_rsh_module.c at line 1016
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Ralph, could you tell me if my command syntax is correct or not ?
>>>>>>>>> if not, give me the expected one ?
>>>>>>>>>
>>>>>>>>> Regards
>>>>>>>>>
>>>>>>>>> Geoffroy
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 2009/4/30 Geoffroy Pignot <geopig...@gmail.com>
>>>>>>>>>
>>>>>>>>> Immediately Sir !!! :)
>>>>>>>>>
>>>>>>>>> Thanks again Ralph
>>>>>>>>>
>>>>>>>>> Geoffroy
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ------------------------------
>>>>>>>>>
>>>>>>>>> Message: 2
>>>>>>>>> Date: Thu, 30 Apr 2009 06:45:39 -0600
>>>>>>>>> From: Ralph Castain <r...@open-mpi.org>
>>>>>>>>> Subject: Re: [OMPI users] 1.3.1 -rf rankfile behaviour ??
>>>>>>>>> To: Open MPI Users <us...@open-mpi.org>
>>>>>>>>> Message-ID:
>>>>>>>>> <71d2d8cc0904300545v61a42fe1k50086d2704d0f...@mail.gmail.com>
>>>>>>>>> Content-Type: text/plain; charset="iso-8859-1"
>>>>>>>>>
>>>>>>>>> I believe this is fixed now in our development trunk - you can
>>>>>>>>> download any
>>>>>>>>> tarball starting from last night and give it a try, if you like.
>>>>>>>>> Any
>>>>>>>>> feedback would be appreciated.
>>>>>>>>>
>>>>>>>>> Ralph
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Apr 14, 2009, at 7:57 AM, Ralph Castain wrote:
>>>>>>>>>
>>>>>>>>> Ah now, I didn't say it -worked-, did I? :-)
>>>>>>>>>
>>>>>>>>> Clearly a bug exists in the program. I'll try to take a look at it
>>>>>>>>> (if Lenny
>>>>>>>>> doesn't get to it first), but it won't be until later in the week.
>>>>>>>>>
>>>>>>>>> On Apr 14, 2009, at 7:18 AM, Geoffroy Pignot wrote:
>>>>>>>>>
>>>>>>>>> I agree with you Ralph , and that 's what I expect from openmpi but
>>>>>>>>> my
>>>>>>>>> second example shows that it's not working
>>>>>>>>>
>>>>>>>>> cat hostfile.0
>>>>>>>>> r011n002 slots=4
>>>>>>>>> r011n003 slots=4
>>>>>>>>>
>>>>>>>>> cat rankfile.0
>>>>>>>>> rank 0=r011n002 slot=0
>>>>>>>>> rank 1=r011n003 slot=1
>>>>>>>>>
>>>>>>>>> mpirun --hostfile hostfile.0 -rf rankfile.0 -n 1 hostname : -n 1
>>>>>>>>> hostname
>>>>>>>>> ### CRASHED
>>>>>>>>>
>>>>>>>>> > > Error, invalid rank (1) in the rankfile (rankfile.0)
>>>>>>>>> > >
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > > [r011n002:25129] [[63976,0],0] ORTE_ERROR_LOG: Bad parameter in
>>>>>>>>> file
>>>>>>>>> > > rmaps_rank_file.c at line 404
>>>>>>>>> > > [r011n002:25129] [[63976,0],0] ORTE_ERROR_LOG: Bad parameter in
>>>>>>>>> file
>>>>>>>>> > > base/rmaps_base_map_job.c at line 87
>>>>>>>>> > > [r011n002:25129] [[63976,0],0] ORTE_ERROR_LOG: Bad parameter in
>>>>>>>>> file
>>>>>>>>> > > base/plm_base_launch_support.c at line 77
>>>>>>>>> > > [r011n002:25129] [[63976,0],0] ORTE_ERROR_LOG: Bad parameter in
>>>>>>>>> file
>>>>>>>>> > > plm_rsh_module.c at line 985
>>>>>>>>> > >
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > > A daemon (pid unknown) died unexpectedly on signal 1 while
>>>>>>>>> > attempting to
>>>>>>>>> > > launch so we are aborting.
>>>>>>>>> > >
>>>>>>>>> > > There may be more information reported by the environment (see
>>>>>>>>> > above).
>>>>>>>>> > >
>>>>>>>>> > > This may be because the daemon was unable to find all the
>>>>>>>>> needed
>>>>>>>>> > shared
>>>>>>>>> > > libraries on the remote node. You may set your LD_LIBRARY_PATH
>>>>>>>>> to
>>>>>>>>> > have the
>>>>>>>>> > > location of the shared libraries on the remote nodes and this
>>>>>>>>> will
>>>>>>>>> > > automatically be forwarded to the remote nodes.
>>>>>>>>> > >
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > >
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > > orterun noticed that the job aborted, but has no info as to the
>>>>>>>>> > process
>>>>>>>>> > > that caused that situation.
>>>>>>>>> > >
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > > orterun: clean termination accomplished
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Message: 4
>>>>>>>>> Date: Tue, 14 Apr 2009 06:55:58 -0600
>>>>>>>>> From: Ralph Castain <r...@lanl.gov>
>>>>>>>>> Subject: Re: [OMPI users] 1.3.1 -rf rankfile behaviour ??
>>>>>>>>> To: Open MPI Users <us...@open-mpi.org>
>>>>>>>>> Message-ID: <f6290ada-a196-43f0-a853-cbcb802d8...@lanl.gov>
>>>>>>>>> Content-Type: text/plain; charset="us-ascii"; Format="flowed";
>>>>>>>>> DelSp="yes"
>>>>>>>>>
>>>>>>>>> The rankfile cuts across the entire job - it isn't applied on an
>>>>>>>>> app_context basis. So the ranks in your rankfile must correspond to
>>>>>>>>> the eventual rank of each process in the cmd line.
>>>>>>>>>
>>>>>>>>> Unfortunately, that means you have to count ranks. In your case,
>>>>>>>>> you
>>>>>>>>> only have four, so that makes life easier. Your rankfile would look
>>>>>>>>> something like this:
>>>>>>>>>
>>>>>>>>> rank 0=r001n001 slot=0
>>>>>>>>> rank 1=r001n002 slot=1
>>>>>>>>> rank 2=r001n001 slot=1
>>>>>>>>> rank 3=r001n002 slot=2
>>>>>>>>>
>>>>>>>>> HTH
>>>>>>>>> Ralph
>>>>>>>>>
>>>>>>>>> On Apr 14, 2009, at 12:19 AM, Geoffroy Pignot wrote:
>>>>>>>>>
>>>>>>>>> > Hi,
>>>>>>>>> >
>>>>>>>>> > I agree that my examples are not very clear. What I want to do is
>>>>>>>>> to
>>>>>>>>> > launch a multiexes application (masters-slaves) and benefit from
>>>>>>>>> the
>>>>>>>>> > processor affinity.
>>>>>>>>> > Could you show me how to convert this command , using -rf option
>>>>>>>>> > (whatever the affinity is)
>>>>>>>>> >
>>>>>>>>> > mpirun -n 1 -host r001n001 master.x options1 : -n 1 -host
>>>>>>>>> r001n002
>>>>>>>>> > master.x options2 : -n 1 -host r001n001 slave.x options3 : -n 1 -
>>>>>>>>> > host r001n002 slave.x options4
>>>>>>>>> >
>>>>>>>>> > Thanks for your help
>>>>>>>>> >
>>>>>>>>> > Geoffroy
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > Message: 2
>>>>>>>>> > Date: Sun, 12 Apr 2009 18:26:35 +0300
>>>>>>>>> > From: Lenny Verkhovsky <lenny.verkhov...@gmail.com>
>>>>>>>>> > Subject: Re: [OMPI users] 1.3.1 -rf rankfile behaviour ??
>>>>>>>>> > To: Open MPI Users <us...@open-mpi.org>
>>>>>>>>> > Message-ID:
>>>>>>>>> > <
>>>>>>>>> 453d39990904120826t2e1d1d33l7bb1fe3de65b5...@mail.gmail.com>
>>>>>>>>> > Content-Type: text/plain; charset="iso-8859-1"
>>>>>>>>> >
>>>>>>>>> > Hi,
>>>>>>>>> >
>>>>>>>>> > The first "crash" is OK, since your rankfile has ranks 0 and 1
>>>>>>>>> > defined,
>>>>>>>>> > while n=1, which means only rank 0 is present and can be
>>>>>>>>> allocated.
>>>>>>>>> >
>>>>>>>>> > NP must be >= the largest rank in rankfile.
>>>>>>>>> >
>>>>>>>>> > What exactly are you trying to do ?
>>>>>>>>> >
>>>>>>>>> > I tried to recreate your seqv but all I got was
>>>>>>>>> >
>>>>>>>>> > ~/work/svn/ompi/trunk/build_x86-64/install/bin/mpirun --hostfile
>>>>>>>>> > hostfile.0
>>>>>>>>> > -rf rankfile.0 -n 1 hostname : -rf rankfile.1 -n 1 hostname
>>>>>>>>> > [witch19:30798] mca: base: component_find: paffinity
>>>>>>>>> > "mca_paffinity_linux"
>>>>>>>>> > uses an MCA interface that is not recognized (component MCA
>>>>>>>>> v1.0.0 !=
>>>>>>>>> > supported MCA v2.0.0) -- ignored
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > It looks like opal_init failed for some reason; your parallel
>>>>>>>>> > process is
>>>>>>>>> > likely to abort. There are many reasons that a parallel process
>>>>>>>>> can
>>>>>>>>> > fail during opal_init; some of which are due to configuration or
>>>>>>>>> > environment problems. This failure appears to be an internal
>>>>>>>>> failure;
>>>>>>>>> > here's some additional information (which may only be relevant to
>>>>>>>>> an
>>>>>>>>> > Open MPI developer):
>>>>>>>>> >
>>>>>>>>> > opal_carto_base_select failed
>>>>>>>>> > --> Returned value -13 instead of OPAL_SUCCESS
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > [witch19:30798] [[INVALID],INVALID] ORTE_ERROR_LOG: Not found in
>>>>>>>>> file
>>>>>>>>> > ../../orte/runtime/orte_init.c at line 78
>>>>>>>>> > [witch19:30798] [[INVALID],INVALID] ORTE_ERROR_LOG: Not found in
>>>>>>>>> file
>>>>>>>>> > ../../orte/orted/orted_main.c at line 344
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > A daemon (pid 11629) died unexpectedly with status 243 while
>>>>>>>>> > attempting
>>>>>>>>> > to launch so we are aborting.
>>>>>>>>> >
>>>>>>>>> > There may be more information reported by the environment (see
>>>>>>>>> above).
>>>>>>>>> >
>>>>>>>>> > This may be because the daemon was unable to find all the needed
>>>>>>>>> > shared
>>>>>>>>> > libraries on the remote node. You may set your LD_LIBRARY_PATH to
>>>>>>>>> > have the
>>>>>>>>> > location of the shared libraries on the remote nodes and this
>>>>>>>>> will
>>>>>>>>> > automatically be forwarded to the remote nodes.
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > mpirun noticed that the job aborted, but has no info as to the
>>>>>>>>> process
>>>>>>>>> > that caused that situation.
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > mpirun: clean termination accomplished
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > Lenny.
>>>>>>>>> >
>>>>>>>>> >
>>>>>>>>> > On 4/10/09, Geoffroy Pignot <geopig...@gmail.com> wrote:
>>>>>>>>> > >
>>>>>>>>> > > Hi ,
>>>>>>>>> > >
>>>>>>>>> > > I am currently testing the process affinity capabilities of
>>>>>>>>> > openmpi and I
>>>>>>>>> > > would like to know if the rankfile behaviour I will describe
>>>>>>>>> below
>>>>>>>>> > is normal
>>>>>>>>> > > or not ?
>>>>>>>>> > >
>>>>>>>>> > > cat hostfile.0
>>>>>>>>> > > r011n002 slots=4
>>>>>>>>> > > r011n003 slots=4
>>>>>>>>> > >
>>>>>>>>> > > cat rankfile.0
>>>>>>>>> > > rank 0=r011n002 slot=0
>>>>>>>>> > > rank 1=r011n003 slot=1
>>>>>>>>> > >
>>>>>>>>> > >
>>>>>>>>> > >
>>>>>>>>> >
>>>>>>>>>
>>>>>>>>> ##################################################################################
>>>>>>>>> > >
>>>>>>>>> > > mpirun --hostfile hostfile.0 -rf rankfile.0 -n 2 hostname ###
>>>>>>>>> OK
>>>>>>>>> > > r011n002
>>>>>>>>> > > r011n003
>>>>>>>>> > >
>>>>>>>>> > >
>>>>>>>>> > >
>>>>>>>>> >
>>>>>>>>>
>>>>>>>>> ##################################################################################
>>>>>>>>> > > but
>>>>>>>>> > > mpirun --hostfile hostfile.0 -rf rankfile.0 -n 1 hostname : -n
>>>>>>>>> 1
>>>>>>>>> > hostname
>>>>>>>>> > > ### CRASHED
>>>>>>>>> > > *
>>>>>>>>> > >
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > > Error, invalid rank (1) in the rankfile (rankfile.0)
>>>>>>>>> > >
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > > [r011n002:25129] [[63976,0],0] ORTE_ERROR_LOG: Bad parameter in
>>>>>>>>> file
>>>>>>>>> > > rmaps_rank_file.c at line 404
>>>>>>>>> > > [r011n002:25129] [[63976,0],0] ORTE_ERROR_LOG: Bad parameter in
>>>>>>>>> file
>>>>>>>>> > > base/rmaps_base_map_job.c at line 87
>>>>>>>>> > > [r011n002:25129] [[63976,0],0] ORTE_ERROR_LOG: Bad parameter in
>>>>>>>>> file
>>>>>>>>> > > base/plm_base_launch_support.c at line 77
>>>>>>>>> > > [r011n002:25129] [[63976,0],0] ORTE_ERROR_LOG: Bad parameter in
>>>>>>>>> file
>>>>>>>>> > > plm_rsh_module.c at line 985
>>>>>>>>> > >
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > > A daemon (pid unknown) died unexpectedly on signal 1 while
>>>>>>>>> > attempting to
>>>>>>>>> > > launch so we are aborting.
>>>>>>>>> > >
>>>>>>>>> > > There may be more information reported by the environment (see
>>>>>>>>> > above).
>>>>>>>>> > >
>>>>>>>>> > > This may be because the daemon was unable to find all the
>>>>>>>>> needed
>>>>>>>>> > shared
>>>>>>>>> > > libraries on the remote node. You may set your LD_LIBRARY_PATH
>>>>>>>>> to
>>>>>>>>> > have the
>>>>>>>>> > > location of the shared libraries on the remote nodes and this
>>>>>>>>> will
>>>>>>>>> > > automatically be forwarded to the remote nodes.
>>>>>>>>> > >
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > >
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > > orterun noticed that the job aborted, but has no info as to the
>>>>>>>>> > process
>>>>>>>>> > > that caused that situation.
>>>>>>>>> > >
>>>>>>>>> >
>>>>>>>>> --------------------------------------------------------------------------
>>>>>>>>> > > orterun: clean termination accomplished
>>>>>>>>> > > *
>>>>>>>>> > > It seems that the rankfile option is not propagted to the
>>>>>>>>> second
>>>>>>>>> > command
>>>>>>>>> > > line ; there is no global understanding of the ranking inside a
>>>>>>>>> > mpirun
>>>>>>>>> > > command.
>>>>>>>>> > >
>>>>>>>>> > >
>>>>>>>>> > >
>>>>>>>>> >
>>>>>>>>>
>>>>>>>>> ##################################################################################
>>>>>>>>> > >
>>>>>>>>> > > Assuming that , I tried to provide a rankfile to each command
>>>>>>>>> line:
>>>>>>>>> > >
>>>>>>>>> > > cat rankfile.0
>>>>>>>>> > > rank 0=r011n002 slot=0
>>>>>>>>> > >
>>>>>>>>> > > cat rankfile.1
>>>>>>>>> > > rank 0=r011n003 slot=1
>>>>>>>>> > >
>>>>>>>>> > > mpirun --hostfile hostfile.0 -rf rankfile.0 -n 1 hostname : -rf
>>>>>>>>> > rankfile.1
>>>>>>>>> > > -n 1 hostname ### CRASHED
>>>>>>>>> > > *[r011n002:28778] *** Process received signal ***
>>>>>>>>> > > [r011n002:28778] Signal: Segmentation fault (11)
>>>>>>>>> > > [r011n002:28778] Signal code: Address not mapped (1)
>>>>>>>>> > > [r011n002:28778] Failing at address: 0x34
>>>>>>>>> > > [r011n002:28778] [ 0] [0xffffe600]
>>>>>>>>> > > [r011n002:28778] [ 1]
>>>>>>>>> > > /tmp/HALMPI/openmpi-1.3.1/lib/libopen-rte.so.
>>>>>>>>> > 0(orte_odls_base_default_get_add_procs_data+0x55d)
>>>>>>>>> > > [0x5557decd]
>>>>>>>>> > > [r011n002:28778] [ 2]
>>>>>>>>> > > /tmp/HALMPI/openmpi-1.3.1/lib/libopen-rte.so.
>>>>>>>>> > 0(orte_plm_base_launch_apps+0x117)
>>>>>>>>> > > [0x555842a7]
>>>>>>>>> > > [r011n002:28778] [ 3] /tmp/HALMPI/openmpi-1.3.1/lib/openmpi/
>>>>>>>>> > mca_plm_rsh.so
>>>>>>>>> > > [0x556098c0]
>>>>>>>>> > > [r011n002:28778] [ 4] /tmp/HALMPI/openmpi-1.3.1/bin/orterun
>>>>>>>>> > [0x804aa27]
>>>>>>>>> > > [r011n002:28778] [ 5] /tmp/HALMPI/openmpi-1.3.1/bin/orterun
>>>>>>>>> > [0x804a022]
>>>>>>>>> > > [r011n002:28778] [ 6] /lib/libc.so.6(__libc_start_main+0xdc)
>>>>>>>>> > [0x9f1dec]
>>>>>>>>> > > [r011n002:28778] [ 7] /tmp/HALMPI/openmpi-1.3.1/bin/orterun
>>>>>>>>> > [0x8049f71]
>>>>>>>>> > > [r011n002:28778] *** End of error message ***
>>>>>>>>> > > Segmentation fault (core dumped)*
>>>>>>>>> > >
>>>>>>>>> > >
>>>>>>>>> > >
>>>>>>>>> > > I hope that I've found a bug because it would be very important
>>>>>>>>> > for me to
>>>>>>>>> > > have this kind of capabiliy .
>>>>>>>>> > > Launch a multiexe mpirun command line and be able to bind my
>>>>>>>>> exes
>>>>>>>>> > and
>>>>>>>>> > > sockets together.
>>>>>>>>> > >
>>>>>>>>> > > Thanks in advance for your help
>>>>>>>>> > >
>>>>>>>>> > > Geoffroy
>>>>>>>>> > _______________________________________________
>>>>>>>>> > users mailing list
>>>>>>>>> > us...@open-mpi.org
>>>>>>>>> > http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>>>>>>
>>>>>>>>> -------------- next part --------------
>>>>>>>>> HTML attachment scrubbed and removed
>>>>>>>>>
>>>>>>>>> ------------------------------
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> users mailing list
>>>>>>>>> us...@open-mpi.org
>>>>>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>>>>>>
>>>>>>>>> End of users Digest, Vol 1202, Issue 2
>>>>>>>>> **************************************
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> users mailing list
>>>>>>>>> us...@open-mpi.org
>>>>>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> users mailing list
>>>>>>>>> us...@open-mpi.org
>>>>>>>>> -------------- next part --------------
>>>>>>>>> HTML attachment scrubbed and removed
>>>>>>>>>
>>>>>>>>> ------------------------------
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> users mailing list
>>>>>>>>> us...@open-mpi.org
>>>>>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>>>>>>
>>>>>>>>> End of users Digest, Vol 1218, Issue 2
>>>>>>>>> **************************************
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> users mailing list
>>>>>>>>> us...@open-mpi.org
>>>>>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> users mailing list
>>>>>>>>> us...@open-mpi.org
>>>>>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> users mailing list
>>>>>>>>> us...@open-mpi.org
>>>>>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> users mailing list
>>>>>>>>> us...@open-mpi.org
>>>>>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> users mailing list
>>>>>>>>> us...@open-mpi.org
>>>>>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> users mailing list
>>>>>>>> us...@open-mpi.org
>>>>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> users mailing list
>>>>>>> us...@open-mpi.org
>>>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> users mailing list
>>>>>> us...@open-mpi.org
>>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> users mailing list
>>>>> us...@open-mpi.org
>>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>>
>>>>
>>>> _______________________________________________
>>>> users mailing list
>>>> us...@open-mpi.org
>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> users mailing list
>>>> us...@open-mpi.org
>>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>>
>>>
>>> _______________________________________________
>>> users mailing list
>>> us...@open-mpi.org
>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>
>>>
>>>
>>> _______________________________________________
>>> users mailing list
>>> us...@open-mpi.org
>>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>>
>>
>> _______________________________________________
>> users mailing list
>> us...@open-mpi.org
>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>
>>
>>
>> _______________________________________________
>> users mailing list
>> us...@open-mpi.org
>> http://www.open-mpi.org/mailman/listinfo.cgi/users
>>
>
> _______________________________________________
> users mailing list
> us...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/users
>
>
>
> _______________________________________________
> users mailing list
> us...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/users
>
