fantastic, thank you very much, -----Original Message----- From: Shiqing Fan [mailto:f...@hlrs.de] Sent: 29 November 2011 14:10 To: MM Cc: 'Open MPI Users' Subject: Re: [OMPI users] orte_debugger_select and orte_ess_set_name failed
Hi MM, That doesn't really help. Do you need a debug version on your 32 bit Windows XP? Maybe I can build one for you. Will send it to you off the mailing list. Regards, Shiqing On 2011-11-29 2:59 PM, MM wrote: > debugging mpirund arrives to > openmpi-1.5.4\opal\mca\base\mca_base_components_select.c: > function mca_base_select > > components_available list appears to be empty, ie > orte_debugger_base_components_available appears to be empty (opal list > length=0) > > Is this an indication of something meaningful? > > Note, I built opnempi static libs (with dll c/c++ runtime) > OMPI_IMPORTS is __not__ defined, that's how I got it to compile > > MM > -----Original Message----- > From: Shiqing Fan [mailto:f...@hlrs.de] > Sent: 25 November 2011 22:19 > To: MM > Subject: Re: [OMPI users] orte_debugger_select and orte_ess_set_name failed > > Hi MM, > > Do you really want to build Open MPI by yourself? If you only need the > libraries, probably you may stick to 1.5.4 binaries, which you said > works for you. > > Anyway, if you want to debug mpirun, you can step into orterun project, > which generates mpirun executable. > > Which version of Open MPI are you building? I'm not sure whether I'll > have time this days to look closely to this problem, but if you can > reproduce this problem with a small test program, and send it to me, I > would like also help debug it. > > > Best Regards, > Shiqing > > > On 2011-11-25 11:06 PM, MM wrote: >> Shiqing, >> >> As I built the mpi libs in debug as well, can I break point somehow when I >> run >> >> mpirun -np 1<debugbinary1> : -np 1<debugbinary2> >> >> and I get those 2 errors. >> >> Can I breakpoint somehow inside vs2010? maybe to investigate what's going >> on? >> >> How do I launch "mpirun" in debug from the openmpi solution. Which project >> generates the mpirun binary? >> >> I am a bit stuck and would appreciate help to progress, >> >> rds, >> >> MM >> >> -----Original Message----- >> From: Shiqing Fan [mailto:f...@hlrs.de] >> Sent: 24 November 2011 16:44 >> To: MM >> Cc: 'Open MPI Users' >> Subject: Re: [OMPI users] orte_debugger_select and orte_ess_set_name > failed >> Hi MM, >> >> Sorry for the delayed reply, I was busy in a meeting these days. >> >> The log files seem not very helpful to solve the problem. May be your >> CMakeCache.txt file would help. >> >> Currently we don't provided binaries built from trunk. Have you also >> tried the 1.5.x binaries? >> >> Best Regards, >> Shiqing >> >> On 2011-11-23 10:08 PM, MM wrote: >>> Hi Shiqing, >>> >>> Is the info provided useful to understand what's going on? >>> Alternatively, is there a way to get the provided binaries for win but > off >>> trunk rather than off 1.5.4 as on the website, because I don't have this >>> problem when I link against those libs, >>> >>> Thanks >>> >>> MM >>> >>> -----Original Message----- >>> From: users-boun...@open-mpi.org [mailto:users-boun...@open-mpi.org] On >>> Behalf Of MM >>> Sent: 21 November 2011 21:08 >>> To: f...@hlrs.de >>> Cc: 'Open MPI Users' >>> Subject: Re: [OMPI users] orte_debugger_select and orte_ess_set_name >> failed >>> Hi, >>> >>> I have placed the source in \Program Files\openmpi-1.5.4 the build dir in >>> \Program Files\openmpi.build and the install dir in \Program > Files\openmpi >>> I could not find config.log in any of the 3 directories nor in the >> directory >>> from which I run mpirun. >>> >>> The build log attached is a zip of all the .log under \Program >>> Files\openmpi.build >>> >>> First, I installed the provided binaries on xp32bit, and successfully ran >>> the program in Release mode. >>> in debug mode, there was that error of some function missing in kernel, >> that >>> you fixed in svn. >>> >>> Second, I then downloaded the source and built the static libraries w >> cmake >>> according to README.windows, and against these home built libs, the same >>> program run neithers in debug nor in release, because of the error below. >>> >>> How can I generate the config.log? >>> >>> About Debug/Release, thinking about it at this time, I don't really need >> the >>> debug libs of openmpi. >>> but to be able to link against vs2010 Release libs of openmpi, I need > them >>> to be linked against the Release c runtime, so I might as well link >> against >>> the debug version of the openmpi libs. >>> >>> Your help is very appreciated, >>> MM >>> >>> -----Original Message----- >>> From: Shiqing Fan [mailto:f...@hlrs.de] >>> Sent: 21 November 2011 12:48 >>> To: Open MPI Users >>> Cc: MM >>> Subject: Re: [OMPI users] orte_debugger_select and orte_ess_set_name >> failed >>> Hi, >>> >>> Could you please send your config and build log to me? Have you tried > with >> a >>> simpler program? Does this error always happen? >>> >>> Regards, >>> Shiqing >>> >>> >>> On 2011-11-19 4:24 PM, MM wrote: >>>> Trying to run my program linked against debug 1.5.4 on vs2010 fails: >>>> >>>>>>> mpirun -np 1 .\nhui\Debug\nhui.exe : -np 1 >>>>>>> .\nhcomp\Debug\nhcomp.exe >>>> [PCNAME:04960] [[1282,0],0] ORTE_ERROR_LOG: Not found in file >>>> C:\Program Files\openmpi-1.5.4\orte\mca\ess\hnp\ess_hnp_module.c at >>>> line 536 >>>> ---------------------------------------------------------------------- >>>> ---- It looks like orte_init failed for some reason; your parallel >>>> process is likely to abort. There are many reasons that a parallel >>>> process can fail during orte_init; some of which are due to >>>> configuration or environment problems. This failure appears to be an >>>> internal failure; here's some additional information (which may only >>>> be relevant to an Open MPI developer): >>>> >>>> orte_debugger_select failed >>>> --> Returned value Not found (-13) instead of ORTE_SUCCESS >>>> ---------------------------------------------------------------------- >>>> ---- [PCNAME:04960] [[1282,0],0] ORTE_ERROR_LOG: Not found in file >>>> C:\Program Files\openmpi-1.5.4\orte\runtime\orte_init.c at line 128 >>>> ---------------------------------------------------------------------- >>>> ---- It looks like orte_init failed for some reason; your parallel >>>> process is likely to abort. There are many reasons that a parallel >>>> process can fail during orte_init; some of which are due to >>>> configuration or environment problems. This failure appears to be an >>>> internal failure; here's some additional information (which may only >>>> be relevant to an Open MPI developer): >>>> >>>> orte_ess_set_name failed >>>> --> Returned value Not found (-13) instead of ORTE_SUCCESS >>>> ---------------------------------------------------------------------- >>>> ---- [LLDNRATDHY9H4J:04960] [[1282,0],0] ORTE_ERROR_LOG: Not found in >>>> file C:\Program Files\openmpi-1.5.4\orte\tools\orterun\orterun.c at >>>> line 616 >>>> >>>> any help is appreciated, >>>> MM >>>> >>>> _______________________________________________ >>>> users mailing list >>>> us...@open-mpi.org >>>> http://www.open-mpi.org/mailman/listinfo.cgi/users >>>> >>> -- >>> --------------------------------------------------------------- >>> Shiqing Fan >>> High Performance Computing Center Stuttgart (HLRS) >>> Tel: ++49(0)711-685-87234 Nobelstrasse 19 >>> Fax: ++49(0)711-685-65832 70569 Stuttgart >>> http://www.hlrs.de/organization/people/shiqing-fan/ >>> email: f...@hlrs.de >>> >>> >>> > **************************************************************************** >>> * >>> ** >>> ** >>> ** WARNING: This email contains an attachment of a very suspicious type. >>> ** >>> ** You are urged NOT to open this attachment unless you are absolutely >>> ** >>> ** sure it is legitimate. Opening this attachment may cause irreparable >>> ** >>> ** damage to your computer and your files. If you have any questions >>> ** >>> ** about the validity of this message, PLEASE SEEK HELP BEFORE OPENING > IT. >>> ** >>> ** >>> ** >>> ** This warning was added by the IU Computer Science Dept. mail scanner. >>> ** >>> > **************************************************************************** >>> * >>> >>> >>> >>> > -- --------------------------------------------------------------- Shiqing Fan High Performance Computing Center Stuttgart (HLRS) Tel: ++49(0)711-685-87234 Nobelstrasse 19 Fax: ++49(0)711-685-65832 70569 Stuttgart http://www.hlrs.de/organization/people/shiqing-fan/ email: f...@hlrs.de
