Thanks, configuring with '--enable-mca-no-build=rmcast' did the trick for me.
Daniel
users-boun...@open-mpi.org wrote on 07/30/2012 04:21:13 PM:
> FWIW: the rmcast framework shouldn't be in 1.6. Jeff and I are
> testing removal and should have it out of there soon.
>
> Meantime, the best solution is to "--enable-mca-no-build rmcast"
>
> On Jul 30, 2012, at 7:15 AM, TERRY DONTJE wrote:
>
> Do you know what r# of 1.6 you were trying to compile? Is this via
> the tarball or svn?
>
> thanks,
>
> --td
>
> On 7/30/2012 9:41 AM, Daniel Junglas wrote:
> Hi,
>
> I compiled OpenMPI 1.6 on a 64bit Solaris ultrasparc machine.
> Compilation and installation worked without a problem. However,
> when trying to run an application with mpirun I always faced
> this error:
>
> [hostname:14798] [[50433,0],0] rmcast:init: setsockopt() failed on
> MULTICAST_IF
> for multicast network xxx.xxx.xxx.xxx interface xxx.xxx.xxx.xxx
> Error: Invalid argument (22)
> [hostname:14798] [[50433,0],0] ORTE_ERROR_LOG: Error in file
> ../../../../../openmpi-1.6/orte/mca/rmcast/udp/rmcast_udp.c at line 825
> [hostname:14798] [[50433,0],0] ORTE_ERROR_LOG: Error in file
> ../../../../../openmpi-1.6/orte/mca/rmcast/udp/rmcast_udp.c at line 744
> [hostname:14798] [[50433,0],0] ORTE_ERROR_LOG: Error in file
> ../../../../../openmpi-1.6/orte/mca/rmcast/udp/rmcast_udp.c at line 193
> [hostname:14798] [[50433,0],0] ORTE_ERROR_LOG: Error in file
> ../../../../openmpi-1.6/orte/mca/rmcast/base/rmcast_base_select.c at
line
> 56
> [hostname:14798] [[50433,0],0] ORTE_ERROR_LOG: Error in file
> ../../../../../openmpi-1.6/orte/mca/ess/hnp/ess_hnp_module.c at line 233
>
--------------------------------------------------------------------------
> It looks like orte_init failed for some reason; your parallel process is
> likely to abort. There are many reasons that a parallel process can
> fail during orte_init; some of which are due to configuration or
> environment problems. This failure appears to be an internal failure;
> here's some additional information (which may only be relevant to an
> Open MPI developer):
>
> orte_rmcast_base_select failed
> --> Returned value Error (-1) instead of ORTE_SUCCESS
>
>
> After some digging I found that the following patch seems to fix the
> problem (at least the application seems to run correct now):
> --- a/orte/mca/rmcast/udp/rmcast_udp.c Tue Apr 3 16:30:29 2012
> +++ b/orte/mca/rmcast/udp/rmcast_udp.c Mon Jul 30 15:12:02 2012
> @@ -936,9 +936,16 @@
> }
> } else {
> /* on the xmit side, need to set the interface */
> + void const *addrptr;
> memset(&inaddr, 0, sizeof(inaddr));
> inaddr.sin_addr.s_addr = htonl(chan->interface);
> +#ifdef __sun
> + addrlen = sizeof(inaddr.sin_addr);
> + addrptr = (void *)&inaddr.sin_addr;
> +#else
> addrlen = sizeof(struct sockaddr_in);
> + addrptr = (void *)&inaddr;
> +#endif
>
> OPAL_OUTPUT_VERBOSE((2, orte_rmcast_base.rmcast_output,
> "setup:socket:xmit interface
> %03d.%03d.%03d.%03d",
> @@ -945,7 +952,7 @@
> OPAL_IF_FORMAT_ADDR(chan->interface)));
>
> if ((setsockopt(target_sd, IPPROTO_IP, IP_MULTICAST_IF,
> - (void *)&inaddr, addrlen)) < 0) {
> + addrptr, addrlen)) < 0) {
> opal_output(0, "%s rmcast:init: setsockopt() failed on
> MULTICAST_IF\n"
> "\tfor multicast network %03d.%03d.%03d.%03d
> interface %03d.%03d.%03d.%03d\n\tError: %s (%d)",
> ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
> Can anybody confirm that the patch is good/correct? In particular
> that the '__sun' part is the right thing to do?
>
> Thanks,
>
> Daniel
>
> _______________________________________________
> users mailing list
> us...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/users
>
> --
> Terry D. Dontje | Principal Software Engineer
> Developer Tools Engineering | +1.781.442.2631
> Oracle - Performance Technologies
> 95 Network Drive, Burlington, MA 01803
> Email terry.don...@oracle.com
>
> _______________________________________________
> users mailing list
> us...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/users
> _______________________________________________
> users mailing list
> us...@open-mpi.org
> http://www.open-mpi.org/mailman/listinfo.cgi/users
smime.p7s
Description: S/MIME Cryptographic Signature
