Victor <victor.major <at> gmail.com> writes: > > I got 4 x AMD A-10 6800K nodes on loan for a few months and added them to my existing Intel nodes. > All nodes share the relevant directories via NFS. I have OpenMPI 1.6.5 which was build with Open-MX 1.5.3 support networked via GbE. > > All nodes run Ubuntu 12.04. > > Problem: > > I can run a job EITHER on 4 x AMD nodes OR on 2 x Intel nodes, but I cannot run a job on any combination of an AMD and Intel node, ie. 1 x AMD node + 1 x Intel node = error below. > > The error that I get during job setup is: > > -------------------------------------------------------------------------- At least one pair of MPI processes are unable to reach each other forMPI communications. This means that no Open MPI device has indicated > that it can be used to communicate between these processes. This isan error; Open MPI requires that all MPI processes be able to reacheach other. This error can sometimes be the result of forgetting tospecify the "self" BTL. > Process 1 ([[2229,1],1]) is on host: AMD-Node-1 Process 2 ([[2229,1],8]) is on host: Intel-Node-1 BTLs attempted: self sm tcpYour MPI job is now going to abort; sorry.------------------------------------------- ------------------------------- > -------------------------------------------------------------------------- MPI_INIT has failed because at least one MPI process is unreachablefrom another. This *usually* means that an underlying communication > plugin -- such as a BTL or an MTL -- has either not loaded or notallowed itself to be used. Your MPI job will now abort.You may wish to try to narrow down the problem; * Check the output of ompi_info to see which BTL/MTL plugins are > available. * Run your application with MPI_THREAD_SINGLE. * Set the MCA parameter btl_base_verbose to 100 (or mtl_base_verbose, if using MTL-based communications) to see exactly which communication plugins were considered and/or discarded. > -------------------------------------------------------------------------- [AMD-Node-1:3932] *** An error occurred in MPI_Init[AMD-Node-1:3932] *** on a NULL communicator[AMD-Node-1:3932] *** Unknown error[AMD-Node-1:3932] *** MPI_ERRORS_ARE_FATAL: your MPI job will now abort > -------------------------------------------------------------------------- An MPI process is aborting at a time when it cannot guarantee that allof its peer processes in the job will be killed properly. You should > double check that everything has shut down cleanly. Reason: Before MPI_INIT completed Local host: AMD-Node-1 PID: 3932---------------- ---------------------------------------------------------- > > > What I would like to know is, is it actually difficult (impossible) to mix AMD and Intel machines in the same cluster and have them run the same job, or am I missing something obvious, or not so obvious when it comes to the communication stack on the Intel nodes for example. > > I set up the AMD nodes just yesterday, but I used the same OpenMPI and Open-MX versions, however I may have inadvertently done something different, so I am thinking (hoping) that it is possible to run such a heterogeneous cluster, and that all I need to do is ensure that all OpenMPI modules are correctly installed on all nodes. > > I need the extra 32 Gb RAM and the AMD nodes bring as I need to validate our CFD application, and our additional Intel nodes are still not here (ETA 2 weeks). > > Thank you, > > > > Victor > > > _______________________________________________ > users mailing list > users <at> open-mpi.org > http://www.open-mpi.org/mailman/listinfo.cgi/users
I know you can help me in solving this problem. I can compile my helloworld.c program using mpicc and I have confirmed that the script runs correctly on another working cluster, so the local paths are set up correctly I think and the script definitely works. If I execute mpirun from my master node, and using only the master node, helloworld executes correctly: mpirun -n 1 -host master --mca btl sm,openib,self ./helloworldmpi hello world from process 0 of 1 If I execute mpirun from my master node, using only the worker node, helloworld executes correctly: mpirun -n 1 -host node001 --mca btl sm,openib,self./helloworldmpi hello world from process 0 of 1 Now, my problem is that if I try to run helloworld on both nodes, I get an error: mpirun -n 2 -host master,node001 --mca btl openib,self ./helloworldmpi -------------------------------------------------------------------------- At least one pair of MPI processes are unable to reach each other for MPI communications. This means that no Open MPI device has indicated that it can be used to communicate between these processes. This is an error; Open MPI requires that all MPI processes be able to reach each other. This error can sometimes be the result of forgetting to specify the "self" BTL. Process 1 ([[5228,1],0]) is on host: hsaeed Process 2 ([[5228,1],1]) is on host: node001 BTLs attempted: self Your MPI job is now going to abort; sorry. -------------------------------------------------------------------------- -------------------------------------------------------------------------- It looks like MPI_INIT failed for some reason; your parallel process is likely to abort. There are many reasons that a parallel process can fail during MPI_INIT; some of which are due to configuration or environment problems. This failure appears to be an internal failure; here's some additional information (which may only be relevant to an Open MPI developer): PML add procs failed --> Returned "Unreachable" (-12) instead of "Success" (0) -------------------------------------------------------------------------- *** The MPI_Init() function was called before MPI_INIT was invoked. *** This is disallowed by the MPI standard. *** Your MPI job will now abort. Abort before MPI_INIT completed successfully; not able to guarantee that all other processes were killed! -------------------------------------------------------------------------- mpirun has exited due to process rank 0 with PID 7037 on node xxxx exiting without calling "finalize". This may have caused other processes in the application to be terminated by signals sent by mpirun (as reported here). -------------------------------------------------------------------------- *** The MPI_Init() function was called before MPI_INIT was invoked. *** This is disallowed by the MPI standard. *** Your MPI job will now abort. Abort before MPI_INIT completed successfully; not able to guarantee that all other processes were killed! 1 more process has sent help message help-mca-bml-r2.txt / unreachable proc Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages 1 more process has sent help message help-mpi-runtime i tried using mpirun -n 2 -host master,node001 --mca btl tcp,sm,self ./helloworldmpi mpirun -n 2 -host master,node001 --mca btl o penib,tcp,self ./helloworldmpi etc.. But no flag is works. Can some one reply with the idea. Thanks in Advance. Regards-- hamid
