https://github.com/SDRausty/termux-archlinux/issues/78 On Fri, 26 Feb 2021, 04:28 LINUS FERNANDES, <linus.fernan...@gmail.com> wrote:
> ifconfig on Termux > > dummy0: flags=195<UP,BROADCAST,RUNNING,NOARP> mtu 1500 > inet6 fe80::488e:42ff:fe43:b843 prefixlen 64 scopeid 0x20<link> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen > 0 (UNSPEC) > RX packets 0 bytes 0 (0.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 3 bytes 210 (210.0 B) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 > inet 127.0.0.1 netmask 255.0.0.0 > inet6 ::1 prefixlen 128 scopeid 0x10<host> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen > 0 (UNSPEC) > RX packets 12 bytes 1285 (1.2 KiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 12 bytes 1285 (1.2 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > p2p0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen > 1000 (UNSPEC) > RX packets 0 bytes 0 (0.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 0 bytes 0 (0.0 B) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > rmnet_data0: flags=65<UP,RUNNING> mtu 1500 > inet 10.132.157.153 netmask 255.255.255.252 > inet6 fe80::fbbc:50e0:b07d:6380 prefixlen 64 scopeid 0x20<link> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen > 1000 (UNSPEC) > RX packets 3041 bytes 1828676 (1.7 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 3079 bytes 794069 (775.4 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > rmnet_data7: flags=65<UP,RUNNING> mtu 2000 > inet6 fe80::e516:d4c5:e5f7:e54e prefixlen 64 scopeid 0x20<link> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen > 1000 (UNSPEC) > RX packets 8 bytes 620 (620.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 10 bytes 752 (752.0 B) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > rmnet_ipa0: flags=65<UP,RUNNING> mtu 2000 > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen > 1000 (UNSPEC) > RX packets 1926 bytes 1865884 (1.7 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 3089 bytes 794821 (776.1 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen > 1000 (UNSPEC) > RX packets 0 bytes 0 (0.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 0 bytes 0 (0.0 B) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > ipaddr on Termux: > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group > default > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > valid_lft forever preferred_lft forever > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state > UNKNOWN group default > link/ether 4a:8e:42:43:b8:43 brd ff:ff:ff:ff:ff:ff > inet6 fe80::488e:42ff:fe43:b843/64 scope link > valid_lft forever preferred_lft forever > 3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default > link/sit 0.0.0.0 brd 0.0.0.0 > 4: rmnet_ipa0: <UP,LOWER_UP> mtu 2000 qdisc pfifo_fast state UNKNOWN group > default qlen 1000 > link/[530] > 5: rmnet_data0: <UP,LOWER_UP> mtu 1500 qdisc htb state UNKNOWN group > default qlen 1000 > link/[530] > inet 10.132.157.153/30 scope global rmnet_data0 > valid_lft forever preferred_lft forever > inet6 fe80::fbbc:50e0:b07d:6380/64 scope link > valid_lft forever preferred_lft forever > 6: rmnet_data1: <> mtu 1500 qdisc noop state DOWN group default qlen 1000 > link/[530] > 7: rmnet_data2: <> mtu 1500 qdisc noop state DOWN group default qlen 1000 > link/[530] > 8: rmnet_data3: <> mtu 1500 qdisc noop state DOWN group default qlen 1000 > link/[530] > 9: rmnet_data4: <> mtu 1500 qdisc noop state DOWN group default qlen 1000 > link/[530] > 10: rmnet_data5: <> mtu 1500 qdisc noop state DOWN group default qlen 1000 > link/[530] > 11: rmnet_data6: <> mtu 1500 qdisc noop state DOWN group default qlen 1000 > link/[530] > 12: rmnet_data7: <UP,LOWER_UP> mtu 2000 qdisc htb state UNKNOWN group > default qlen 1000 > link/[530] > inet6 fe80::e516:d4c5:e5f7:e54e/64 scope link > valid_lft forever preferred_lft forever > 13: r_rmnet_data0: <> mtu 1500 qdisc noop state DOWN group default qlen > 1000 > link/[530] > 14: r_rmnet_data1: <> mtu 1500 qdisc noop state DOWN group default qlen > 1000 > link/[530] > 15: r_rmnet_data2: <> mtu 1500 qdisc noop state DOWN group default qlen > 1000 > link/[530] > 16: r_rmnet_data3: <> mtu 1500 qdisc noop state DOWN group default qlen > 1000 > link/[530] > 17: r_rmnet_data4: <> mtu 1500 qdisc noop state DOWN group default qlen > 1000 > link/[530] > 18: r_rmnet_data5: <> mtu 1500 qdisc noop state DOWN group default qlen > 1000 > link/[530] > 19: r_rmnet_data6: <> mtu 1500 qdisc noop state DOWN group default qlen > 1000 > link/[530] > 20: r_rmnet_data7: <> mtu 1500 qdisc noop state DOWN group default qlen > 1000 > link/[530] > 21: r_rmnet_data8: <> mtu 1500 qdisc noop state DOWN group default qlen > 1000 > link/[530] > 22: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state > DOWN group default qlen 1000 > link/ether 04:d1:3a:07:70:4b brd ff:ff:ff:ff:ff:ff > 23: p2p0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN > group default qlen 1000 > link/ether 06:d1:3a:07:70:4b brd ff:ff:ff:ff:ff:ff > > > > The above is the output of ifconfig and ip addr on Termux. OpenMPI works > as expected on a single node, which is what I desire. > > I'm sure I can get OpenMPI to work on a PC or laptop running Windows or > Linux. > > That's not my question, however. > > > On Thu, 25 Feb 2021, 23:49 Jeff Squyres (jsquyres), <jsquy...@cisco.com> > wrote: > >> You asked several questions: >> >> > But I'm able to get Apache working on a different port 8080. Is that >> useful? >> >> That's fine, but Apache has different requirements than Open MPI. >> >> > Do you think executing mpirun as a normal user will work? >> >> If it didn't work as root, it most likely won't work as a normal user. >> >> > Yes, it's self-learning. >> > I have no applications to run. >> >> Do you have any other MacOS / Linux environment in which to run Open >> MPI? That might end up being simpler. >> >> > I'd imagine the builders of Arch Linux on Termux would want to know >> why OpenMPI is not functioning as expected. >> >> Possibly. Open MPI needs the MAC address of Linux interfaces; that >> doesn't seem to be working in Arch Linux on Termux. >> >> >> >> On Feb 25, 2021, at 12:32 PM, LINUS FERNANDES <linus.fernan...@gmail.com> >> wrote: >> >> I'd imagine the builders of Arch Linux on Termux would want to know why >> OpenMPI is not functioning as expected. >> >> On Thu, 25 Feb 2021, 20:17 Jeff Squyres (jsquyres), <jsquy...@cisco.com> >> wrote: >> >>> I don't know how many people on this list will be familiar with Termux >>> or Arch Linux. From a quick Google, it looks like Termux is an Android >>> emulator (that runs on Android? That doesn't make sense to me, but I'm >>> wholly unfamiliar with that ecosystem, so I don't have the background / >>> grok the context) and provides some kind of Linux environment. And on top >>> of that, you're installing Arch Linux. Is that correct? >>> >>> If that's anywhere close to correct, it sounds like there could be >>> multiple layers of virtualization there, and that could lead to wonkiness >>> in the emulation of the IP stack. >>> >>> I do note that the only interface it looks like Open MPI could use is >>> rmnet_data0, but that's in an UNKNOWN state: >>> >>> 5: rmnet_data0: <UP,LOWER_UP> mtu 1500 qdisc htb state UNKNOWN group >>> default qlen 1000 >>> link/[530] >>> inet 10.140.58.138/30 scope global rmnet_data0 >>> valid_lft forever preferred_lft forever >>> inet6 fe80::93a5:ad99:4660:adc4/64 scope link >>> valid_lft forever preferred_lft forever >>> >>> Errno==13 is EACCESS, which generically translates to "permission >>> denied". Since you're running as root, this suggests that something >>> outside of your local environment (e.g., outside of that immediate layer of >>> virtualization) is preventing Open MPI from making that >>> ioctl(SIOCGIFHWADDR) call (all that call is trying to do is discover the >>> MAC address of that interface). >>> >>> Indeed, it looks like rmnet_data0 somehow doesn't have a MAC address...? >>> >>> rmnet_data0: flags=65<UP,RUNNING> mtu 1500 >>> inet 10.140.58.138 netmask 255.255.255.252 >>> inet6 fe80::93a5:ad99:4660:adc4 prefixlen 64 scopeid 0x20<link> >>> unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >>> txqueuelen 1000 (UNSPEC) >>> RX packets 416796 bytes 376287723 (358.8 MiB) >>> RX errors 0 dropped 0 overruns 0 frame 0 >>> TX packets 318293 bytes 69933666 (66.6 MiB) >>> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>> >>> That's... weird. I don't know the details of this network stack; it's >>> somewhat outside the bounds of "normal" IP-based networking if there's no >>> MAC address. As such, it doesn't surprise me that -- given that one of >>> Open MPI's core assumptions fails -- Open MPI fails / refuses to run. >>> >>> I don't know if anyone has tried to run Open MPI in such a virtualized >>> environment before. >>> >>> >>> >>> >>> On Feb 25, 2021, at 6:04 AM, LINUS FERNANDES via users < >>> users@lists.open-mpi.org> wrote: >>> >>> So the OpenMPI version on Arch Linux can't be made operational? >>> >>> On Thu, 25 Feb 2021, 15:43 LINUS FERNANDES, <linus.fernan...@gmail.com> >>> wrote: >>> >>>> Nope. None of the commands exist. So no, I'd say. >>>> >>>> On Thu, 25 Feb 2021, 15:11 Gilles Gouaillardet via users, < >>>> users@lists.open-mpi.org> wrote: >>>> >>>>> >>>>> https://www.letmegooglethat.com/?q=how+to+check+if+selinux+is+enabled&l=1 >>>>> >>>>> On Thu, Feb 25, 2021 at 6:15 PM LINUS FERNANDES via users >>>>> <users@lists.open-mpi.org> wrote: >>>>> > >>>>> > How do I know that? I'm not a Linux expert. I simply want to get >>>>> OpenMPI running on Arch Linux so that I can test out their Java wrappers >>>>> which I obviously can't on Termux since it doesn't support OpenJDK. >>>>> > >>>>> > On Thu, 25 Feb 2021, 13:37 Gilles Gouaillardet via users, < >>>>> users@lists.open-mpi.org> wrote: >>>>> >> >>>>> >> Is SELinux running on ArchLinux under Termux? >>>>> >> >>>>> >> On 2/25/2021 4:36 PM, LINUS FERNANDES via users wrote: >>>>> >> > Yes, I did not receive this in my inbox since I set to receive >>>>> digest. >>>>> >> > >>>>> >> > -------- >>>>> >> > ifconfig output: >>>>> >> > >>>>> >> > dummy0: flags=195<UP,BROADCAST,RUNNING,NOARP> mtu 1500 >>>>> >> > inet6 fe80::38a0:1bff:fe81:d4f5 prefixlen 64 scopeid >>>>> 0x20<link> >>>>> >> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >>>>> >> > txqueuelen 0 (UNSPEC) >>>>> >> > RX packets 0 bytes 0 (0.0 B) >>>>> >> > RX errors 0 dropped 0 overruns 0 frame 0 >>>>> >> > TX packets 3 bytes 210 (210.0 B) >>>>> >> > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>>>> >> > >>>>> >> > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 >>>>> >> > inet 127.0.0.1 netmask 255.0.0.0 >>>>> >> > inet6 ::1 prefixlen 128 scopeid 0x10<host> >>>>> >> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >>>>> >> > txqueuelen 0 (UNSPEC) >>>>> >> > RX packets 17247 bytes 2062939 (1.9 MiB) >>>>> >> > RX errors 0 dropped 0 overruns 0 frame 0 >>>>> >> > TX packets 17247 bytes 2062939 (1.9 MiB) >>>>> >> > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>>>> >> > >>>>> >> > p2p0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 >>>>> >> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >>>>> >> > txqueuelen 1000 (UNSPEC) >>>>> >> > RX packets 0 bytes 0 (0.0 B) >>>>> >> > RX errors 0 dropped 0 overruns 0 frame 0 >>>>> >> > TX packets 0 bytes 0 (0.0 B) >>>>> >> > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>>>> >> > >>>>> >> > rmnet_data0: flags=65<UP,RUNNING> mtu 1500 >>>>> >> > inet 10.140.58.138 netmask 255.255.255.252 >>>>> >> > inet6 fe80::93a5:ad99:4660:adc4 prefixlen 64 scopeid >>>>> 0x20<link> >>>>> >> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >>>>> >> > txqueuelen 1000 (UNSPEC) >>>>> >> > RX packets 416796 bytes 376287723 (358.8 MiB) >>>>> >> > RX errors 0 dropped 0 overruns 0 frame 0 >>>>> >> > TX packets 318293 bytes 69933666 (66.6 MiB) >>>>> >> > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>>>> >> > >>>>> >> > rmnet_data7: flags=65<UP,RUNNING> mtu 2000 >>>>> >> > inet6 fe80::a6b7:c914:44de:639 prefixlen 64 scopeid >>>>> 0x20<link> >>>>> >> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >>>>> >> > txqueuelen 1000 (UNSPEC) >>>>> >> > RX packets 8 bytes 620 (620.0 B) >>>>> >> > RX errors 0 dropped 0 overruns 0 frame 0 >>>>> >> > TX packets 10 bytes 752 (752.0 B) >>>>> >> > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>>>> >> > >>>>> >> > rmnet_ipa0: flags=65<UP,RUNNING> mtu 2000 >>>>> >> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >>>>> >> > txqueuelen 1000 (UNSPEC) >>>>> >> > RX packets 222785 bytes 381290027 (363.6 MiB) >>>>> >> > RX errors 0 dropped 0 overruns 0 frame 0 >>>>> >> > TX packets 318303 bytes 69934418 (66.6 MiB) >>>>> >> > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>>>> >> > >>>>> >> > wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 >>>>> >> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 >>>>> >> > txqueuelen 1000 (UNSPEC) >>>>> >> > RX packets 650238 bytes 739939859 (705.6 MiB) >>>>> >> > RX errors 0 dropped 0 overruns 0 frame 0 >>>>> >> > TX packets 408284 bytes 63728624 (60.7 MiB) >>>>> >> > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >>>>> >> > >>>>> >> > >>>>> >> > ----- >>>>> >> > ip addr output: >>>>> >> > >>>>> >> > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state >>>>> UNKNOWN >>>>> >> > group default >>>>> >> > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 >>>>> >> > inet 127.0.0.1/8 <http://127.0.0.1/8> scope host lo >>>>> >> > valid_lft forever preferred_lft forever >>>>> >> > inet6 ::1/128 scope host >>>>> >> > valid_lft forever preferred_lft forever >>>>> >> > 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue >>>>> state >>>>> >> > UNKNOWN group default >>>>> >> > link/ether 3a:a0:1b:81:d4:f5 brd ff:ff:ff:ff:ff:ff >>>>> >> > inet6 fe80::38a0:1bff:fe81:d4f5/64 scope link >>>>> >> > valid_lft forever preferred_lft forever >>>>> >> > 3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group >>>>> default >>>>> >> > link/sit 0.0.0.0 brd 0.0.0.0 >>>>> >> > 4: rmnet_ipa0: <UP,LOWER_UP> mtu 2000 qdisc pfifo_fast state >>>>> UNKNOWN >>>>> >> > group default qlen 1000 >>>>> >> > link/[530] >>>>> >> > 5: rmnet_data0: <UP,LOWER_UP> mtu 1500 qdisc htb state UNKNOWN >>>>> group >>>>> >> > default qlen 1000 >>>>> >> > link/[530] >>>>> >> > inet 10.140.58.138/30 <http://10.140.58.138/30> scope global >>>>> >> > rmnet_data0 >>>>> >> > valid_lft forever preferred_lft forever >>>>> >> > inet6 fe80::93a5:ad99:4660:adc4/64 scope link >>>>> >> > valid_lft forever preferred_lft forever >>>>> >> > 6: rmnet_data1: <> mtu 1500 qdisc noop state DOWN group default >>>>> qlen 1000 >>>>> >> > link/[530] >>>>> >> > 7: rmnet_data2: <> mtu 1500 qdisc noop state DOWN group default >>>>> qlen 1000 >>>>> >> > link/[530] >>>>> >> > 8: rmnet_data3: <> mtu 1500 qdisc noop state DOWN group default >>>>> qlen 1000 >>>>> >> > link/[530] >>>>> >> > 9: rmnet_data4: <> mtu 1500 qdisc noop state DOWN group default >>>>> qlen 1000 >>>>> >> > link/[530] >>>>> >> > 10: rmnet_data5: <> mtu 1500 qdisc noop state DOWN group default >>>>> qlen 1000 >>>>> >> > link/[530] >>>>> >> > 11: rmnet_data6: <> mtu 1500 qdisc noop state DOWN group default >>>>> qlen 1000 >>>>> >> > link/[530] >>>>> >> > 12: rmnet_data7: <UP,LOWER_UP> mtu 2000 qdisc htb state UNKNOWN >>>>> group >>>>> >> > default qlen 1000 >>>>> >> > link/[530] >>>>> >> > inet6 fe80::a6b7:c914:44de:639/64 scope link >>>>> >> > valid_lft forever preferred_lft forever >>>>> >> > 13: r_rmnet_data0: <> mtu 1500 qdisc noop state DOWN group default >>>>> >> > qlen 1000 >>>>> >> > link/[530] >>>>> >> > 14: r_rmnet_data1: <> mtu 1500 qdisc noop state DOWN group default >>>>> >> > qlen 1000 >>>>> >> > link/[530] >>>>> >> > 15: r_rmnet_data2: <> mtu 1500 qdisc noop state DOWN group default >>>>> >> > qlen 1000 >>>>> >> > link/[530] >>>>> >> > 16: r_rmnet_data3: <> mtu 1500 qdisc noop state DOWN group default >>>>> >> > qlen 1000 >>>>> >> > link/[530] >>>>> >> > 17: r_rmnet_data4: <> mtu 1500 qdisc noop state DOWN group default >>>>> >> > qlen 1000 >>>>> >> > link/[530] >>>>> >> > 18: r_rmnet_data5: <> mtu 1500 qdisc noop state DOWN group default >>>>> >> > qlen 1000 >>>>> >> > link/[530] >>>>> >> > 19: r_rmnet_data6: <> mtu 1500 qdisc noop state DOWN group default >>>>> >> > qlen 1000 >>>>> >> > link/[530] >>>>> >> > 20: r_rmnet_data7: <> mtu 1500 qdisc noop state DOWN group default >>>>> >> > qlen 1000 >>>>> >> > link/[530] >>>>> >> > 21: r_rmnet_data8: <> mtu 1500 qdisc noop state DOWN group default >>>>> >> > qlen 1000 >>>>> >> > link/[530] >>>>> >> > 22: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq >>>>> state >>>>> >> > DOWN group default qlen 1000 >>>>> >> > link/ether 04:d1:3a:07:70:4b brd ff:ff:ff:ff:ff:ff >>>>> >> > 23: p2p0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq >>>>> state >>>>> >> > DOWN group default qlen 1000 >>>>> >> > link/ether 06:d1:3a:07:70:4b brd ff:ff:ff:ff:ff:ff >>>>> >> > >>>>> >> > >>>>> >> > This is on Arch Linux on Termux. >>>>> >> > >>>>> >> > Similar output on Termux available. >>>>> >> > >>>>> >> > >>>>> >>>> >>> >>> -- >>> Jeff Squyres >>> jsquy...@cisco.com >>> >>> >> >> -- >> Jeff Squyres >> jsquy...@cisco.com >> >>
