Thanks for your help Nischal,i will give latest tcpdump a try

On Fri, Jun 3, 2016 at 10:47 AM, Nischal Sheth <[email protected]> wrote:

>
> Hi Kevin,
>
> I am not aware of a way to decode MPLSoUDP currently.
> MPLSoUDP is defined in https://tools.ietf.org/html/rfc7510.
>
> -Nischal
>
>
> On May 30, 2016, at 5:14 PM, kevin parrikar <[email protected]>
> wrote:
>
> Thanks Nischal,
> I didn't know that.
> Still is there a way to see MPLS labels and inner headers (vm traffic ) on
> tcpdump.
>
> Is mpls over UDP same as MPLS over IP (RFC 4023)
>
> Thanks for your help
> On 30 May 2016 6:48 a.m., "Nischal Sheth" <[email protected]> wrote:
>
>>
>> Note that 51234 is the pre-standard DST port used for MPLS-in-UDP by
>> Contrail.
>>
>> -Nischal
>>
>> On May 29, 2016, at 1:58 PM, Harshad Nakil <[email protected]> wrote:
>>
>> > Vrouter is using MPLSoUDP. Most probably TCP dump does not understand
>> this encapsulation.
>> >
>> > Regards
>> > -Harshad
>> >
>> >
>> >> On May 29, 2016, at 11:56 AM, kevin parrikar <
>> [email protected]> wrote:
>> >>
>> >> hello all
>> >> I am new to contrail ,worked on open vswitch and NSX implementation
>> and trying contrail to understand it more deeply for a different product.
>> >>
>> >> Using contrail 2.20 with MPLS over UDP.
>> >>
>> >> 1. In tcpdump i dont see any MPLS labels instead i see UDP
>> communication between compute nodes using ephemeral ports.for ping between
>> vms.
>> >>
>> >> 16:16:14.262402 IP 192.168.2.5.64681 > 192.168.2.6.51234: UDP, length
>> 102
>> >>        0x0000:  4500 0082 b5ca 0000 4011 3f45 c0a8 0205
>> >>        0x0010:  c0a8 0206 fca9 c822 006e 0000 0001 5140
>> >>        0x0020:  0205 fdd1 e8c9 024e 9373 73f9 0800 4500
>> >>        0x0030:  0054 b5ca 0000 4001 68b7 ac10 0203 ac10
>> >>        0x0040:  0204 0000 c0d2 2101 7956 3116 73bf 0000
>> >>        0x0050:  0000 0000 0000 0000 0000 0000 0000 0000
>> >>        0x0060:  0000 0000 0000 0000 0000 0000 0000 0000
>> >>        0x0070:  0000 0000 0000 0000 0000 0000 0000 0000
>> >>        0x0080:  0000
>> >>
>> >> Can some one tell me how can Lables as wells as tenant VM packets be
>> seen.In GRE i was able to see this but not in MPLS over GRE.
>> >>
>> >>
>> >>
>> >>
>> >> Regards,
>> >> Kevin
>> >>
>> >> _______________________________________________
>> >> Users mailing list
>> >> [email protected]
>> >>
>> http://lists.opencontrail.org/mailman/listinfo/users_lists.opencontrail.org
>> >
>> > _______________________________________________
>> > Dev mailing list
>> > [email protected]
>> >
>> http://lists.opencontrail.org/mailman/listinfo/dev_lists.opencontrail.org
>>
>>
>
_______________________________________________
Users mailing list
[email protected]
http://lists.opencontrail.org/mailman/listinfo/users_lists.opencontrail.org

Reply via email to