Hi Ravindra, Thanks. Even i am not running contrail-nodemgr. This is new info to me. Let me try.
Thanks suresh. From: "Ravindra Rathi" <ravindra_ra...@yahoo.com> To: "Jakub Pavlik" <jpav...@mirantis.com>, "Suresh Kumar S" <sureshkuma...@altencalsoftlabs.com> Cc: "Dev" <dev-boun...@lists.opencontrail.org>, "users" <users@lists.opencontrail.org> Sent: Monday, June 12, 2017 12:01:15 AM Subject: Re: [Users] SNAT Service Instance Creation (Contrail 3.2) Hi Suresh/Jakub, I am also facing same issue. I wonder if this is related to "contrail-nodemgr" not running on compute node ? I mean, that is my read of the situation after going through archives of mailing list. In my case, "contrail-nodemgr" was not running on compute node and I am still not able to make it run successfully. Log file has bunch of "import module" errors. Thanks, Ravindra On Sunday, June 11, 2017 12:55 PM, Jakub Pavlik <jpav...@mirantis.com> wrote: Hi Suresh, 1) please check that all your virtual routers are registered in UI. 2) try on the compute call opencontrail-vrouter-netns if it is executable. I saw similar issue in the past. Jakub On Sun, Jun 11, 2017 at 12:02 PM, Suresh Kumar S via Users < users@lists.opencontrail.org > wrote: Hi, SNAT service instance is not working in my setup. . In my setup (Contrail 3.2, + openstack Mitaka), - VM Creation,associating floating ip is working fine. Able to SSH to VM via floating IP and reaching the INTERNET works fine. Next, i tried to set up the SNAT, Service Instance as mentioned in the link (but used neutron APIs instead of contrail) https://www.juniper.net/ documentation/en_US/contrail3. 2/topics/task/configuration/ snat-vnc.html In the svcmonitor log shows service instance is created. Also I could see the service instance in the introspect of svc-monitor also . SNAT Networks, ports are created. I could able to see in the neutron port-list output. But no network namespaces created in compute node. For further debugging, i see the following error in the svc monitor logs. Also, i see the below error in the svc monitor logs, 06/10/2017 02:33:47 PM [contrail-svc-monitor]: __default__ [SYS_ERR]: SvcMonitorLog: vrouter not found for vm e6d8e241-9e3c-4758-a5a2- bb034fdb4380 06/10/2017 02:33:47 PM [contrail-svc-monitor]: __default__ [SYS_ERR]: SvcMonitorLog: vrouter not found for vm 3668b94a-d19a-4dae-a810- d4b4d45a7a43 06/10/2017 02:33:47 PM [contrail-svc-monitor]: __default__ [SYS_ERR]: SvcMonitorLog: No vrouter available for VM default-domain__demo__snat_ 3cade500-9942-4e54-89af- 5c5bd3089645_0fc5210f-bfe9- 4b8f-9487-9567e25d15c6__1 Question1: Any pointers from the above logs, for further debugging.? Question2: Do i need to start the contrail-vrouter-netns daemon , as mentioned in the below. https://github.com/Juniper/ contrail-controller/tree/R3.2/ src/vnsw/opencontrail-vrouter- netns I have installed vrouter-netns package, and didnt start the "netns-daemon-start" daemon. Is it still applicable? Please confirm. Thanks suresh ______________________________ _________________ Users mailing list Users@lists.opencontrail.org http://lists.opencontrail.org/ mailman/listinfo/users_lists. opencontrail.org -- Jakub Pavlik +420 602 177 027 jpav...@mirantis.com _______________________________________________ Users mailing list Users@lists.opencontrail.org http://lists.opencontrail.org/mailman/listinfo/users_lists.opencontrail.org
_______________________________________________ Users mailing list Users@lists.opencontrail.org http://lists.opencontrail.org/mailman/listinfo/users_lists.opencontrail.org
